[LittleJeep]

getting rid of an aluminum sierra ute tray in good condition, approx 5ft X 6ft i think. all is there except for the little latch things that lock the tray sides together (still has hinges). i'm sure you can buy them new for any sort of tray. $200

3 x 1L cv's, 2 are good and one is good for a spare, SOLD

pair of WT sierra rear axles, retard guy i got them off ground the old bearings to replace and scored the surface for the spacer/collar. $20

LJ81 chassis with a rust hole in the capping along the bottom on the drivers side (i think), transfer cross-member has been butchered out, and maybe gearbox (cant remember). FREE
Chassis is located at Redbank Plains.


pick up from Woodend, Ipswich (except chassis). can post, at your cost.
can get pics if you want.
if i forgot to mention something, just ask and i'll endeavor to answer it.

will consider certain beverages as currency

Cheers

[Highway-Star]

LittleJeep wrote:

LJ81 chassis with a rust hole in the capping along the bottom on the drivers side (i think)

And the important part is, this piece of chassis bracing is the exact same sectional size as Sierra rail (though not full height of course).... so you can kill a Sierra to save an LJ81

[sideways]

Highway-Star wrote:

LittleJeep wrote:

LJ81 chassis with a rust hole in the capping along the bottom on the drivers side (i think)

And the important part is, this piece of chassis bracing is the exact same sectional size as Sierra rail (though not full height of course).... so you can kill a Sierra to save an LJ81

The problem is just about every LJ81 out there requires a Sierra to be killed.

Stupid bodged chassis.

[LittleJeep]

BUMP!