1. What I'm selling1988 Suzuki Sierra
Mechanically in great shape however its far from roadworthy. Needs time spent on it.
It has a 1.6L EFI G16A engine and a 1L surge tank under the hood. I've replaced the shocks and it has 2" suspension and 2" body lift fitted to it
The engine and the front bucket seats are blue plated in QLD. It has some surface rust in a few spots over the body, but all serious rust has already been cut out and repaired.
Since I've had the car I have done a fair bit of work to the beast, but I've since bought a house and have other things to spend my time on, so this is going to remain an unfinished project.
What I've done: Cut out rusted area below the windscreen and welded in new steel.
Replaced Shock absorbers
Replaced leaking radiator with brand new honda civic radiator (with electric fan and shroud)
Installed rock slider to one side of the car (other side needs minor modifications as some lines interfere with the bolt on location)
Stripped the inner floor of the car to bare metal, welded up all the excess screw holes from 25 years of things being installed
Painted the inner floor of the car with Rustbullet
Covered the entire inner floor of the car with Dynamat Xtreme
Replaced MDF door liners with Aluminium checkerplate
Replaced warped dash with custom made aluminium dash
Removed faulty handbrake cable (still needs to be re-installed)
Installed ECU inside the cabin, just under the dash.
Installed Amplifier for radio.
What still needs to be done for roadworthy: (disclaimer: this may not be a complete list):Fit flares to wheel arches (i have 4 x jeep flares included)
Fit gauges to dash (I was going to get tablets and use a OBD2 link (not included))
Install Seats (front bucket seats included, rear bench seat needs modifications but is also included)
Repair handbrake (cable removed)
Reinstall windscreen wipers and steering wheel
What is included with the car:2 sets of 4 wheels, (31" muddies and standard all terrains)
2 Front bucket seats - have been fitted before
1 rear double bench seat - needs modification before fitting
Raptor ute-liner paint (i was going to paint the car floor with this)
A whole pile of parts that I pulled out of the car
Other Details2. Location - Victoria, Carrum Downs.
3. Pick up only. Will need towing as it is NOT ROADWORTHY
4. Price - $3500 ONO.
5. If you can PM me, that would be great. I'll then PM you back with my mobile number and email. I can also give you my address if you want to come and have a look.
6. Photos Available here:
Click for lots more photos: https://goo.gl/photos/WMoT5LDVJPJy7qpZ9A few sample photos:
