auszookers.com
https://auszookers.com/forum/

FS: 89 tin top $2000 engineered.
https://auszookers.com/forum/viewtopic.php?f=7&t=10120		 Page 1 of 2
Author:  31zook [ Sat Feb 27, 2010 8:29 pm ]
Post subject:  FS: 89 tin top $2000 engineered.
hey guy's im selling my 89 swb WT. sam is fully engineered for 31x10.5s, 50mm spring, 50mm Body lift. It has a welded front center, but ill supply a open one also if you want. Has bar work all the way round, all have been tested and proven tough. Has some of character dint's. The motor in this truck is good, needs a carby rebuild, but am trying to get that done before i sell it, so the longer you wait the more likely it will get done....

RTC, Rancho shocks, (the rear need replacing), and 6inch longer brake lines.

has run 33's in the past with no worries....
Image
last dint's
Image


Ill happily let it go for $2500. Needs a Tcase rebuild as i threw a spare in it and is pretty bad condition. The rear center needs to be reset properly by a shop to stop the whine, and the carby works but revs at 2K... i just want it gone, but if i get enough intrest ill wreck it out for parts
Author:  89_tintop [ Sat Feb 27, 2010 9:34 pm ]
Post subject:  Re: FS: 31zooks swb
so your saying good buy to zook land hey???
Author:  31zook [ Sun Feb 28, 2010 1:30 am ]
Post subject:  Re: FS: 31zooks swb
no, i have a project truck still... I just want a DD that i can put in drive and cruise...
Author:  lump_a_charcoal [ Sun Feb 28, 2010 1:51 am ]
Post subject:  Re: FS: 31zooks swb
I think I can see the Virgin Mary in your tyre tread in the first pic...
Author:  31zook [ Sun Feb 28, 2010 1:33 pm ]
Post subject:  Re: FS: 31zooks swb
haha hmm maybe, should i charge more for that?
Author:  31zook [ Mon Mar 22, 2010 6:08 pm ]
Post subject:  Re: FS: 31zooks swb
bump, my lwb will go for rego tomorrow :D
Author:  31zook [ Sun Jun 13, 2010 10:17 pm ]
Post subject:  Re: FS: 31zooks swb
bump price drop.
Author:  liv24b [ Mon Jun 14, 2010 12:35 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
how much?
Author:  31zook [ Mon Jun 14, 2010 3:36 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
$2500
Author:  Ratty562 [ Mon Jun 14, 2010 8:08 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
hi
how much rego has it got

thanks
Author:  eldo [ Mon Jun 14, 2010 9:15 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
josh i cant believe this has not sold.... what are you noobs doing, BUY IT FFS
Author:  steak_knife [ Mon Jun 14, 2010 9:16 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
eldo wrote:
josh i cant believe this has not sold.... what are you noobs doing, BUY IT FFS


X2!!!!!! 8O 8O :? :? :?
Author:  31zook [ Mon Jun 14, 2010 6:49 pm ]
Post subject:  Re: FS: 31zooks swb... price drop.
till the end of september.
Author:  31zook [ Wed Aug 04, 2010 5:33 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
how about i sell it for 2K rego is 04-09-2010. will pass rego easy, just want it gone, open to offers...
Author:  weaves [ Thu Aug 05, 2010 9:52 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
if you part this out, i call dibs of the front clip!
Author:  sleeperzook [ Thu Aug 05, 2010 11:13 am ]
Post subject:  Re: FS: 31zooks swb... price drop.
weaves wrote:
if you part this out, i call dibs of the front clip!


Keen for the 50mm springs if they're in decent condition!!
Author:  31zook [ Mon Aug 09, 2010 6:09 am ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
fair enough weaves, ill part out if this last bump don't get me a buyer...
Author:  nato78 [ Mon Aug 09, 2010 6:38 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
i'll take the front bar and sliders, and rear bar if its same tube as rest
Author:  lump_a_charcoal [ Mon Aug 09, 2010 9:18 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
So is the tub rust free in the front section?

Would it suit a ute chop?
Author:  31zook [ Tue Aug 10, 2010 10:28 am ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
yep linc, it would, it has rear quarter damage, and a damaged sill, but if you are going to chop it up then i couple of ding's won't matter in the long run.

also it's rust free.
Author:  steak_knife [ Tue Aug 10, 2010 12:23 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
31zook wrote:
yep linc, it would, it has rear quarter damage, and a damaged sill, but if you are going to chop it up then i couple of ding's won't matter in the long run.

also it's rust free.


But if you want some rust, I have some you can have!! :P :roll:
Author:  BlueSuzy [ Tue Aug 10, 2010 3:10 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
I have some rust closer Linc!
Author:  31zook [ Tue Aug 10, 2010 6:53 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
:lol:
Author:  Scrawny [ Tue Aug 10, 2010 11:50 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
Please please don't chop it up!! Not enough decent tintops left now :cry:
Author:  lump_a_charcoal [ Wed Aug 11, 2010 2:21 am ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
it isn't decent... Did you see the pics?
Author:  Jccck [ Wed Aug 11, 2010 4:43 am ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
I might just buy this, whole.. I will let you know tonight, ok
Author:  31zook [ Thu Aug 12, 2010 7:00 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
you didn't buy it jccck.....
Author:  steak_knife [ Thu Aug 12, 2010 8:38 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
31zook wrote:
you didn't buy it jccck.....


:P I nearly did 12 month's ago.. :P
Author:  vacant [ Thu Aug 12, 2010 8:44 pm ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
I'd be keen for a bl if you do part it. Possibly some bar work too
Author:  Chopz [ Fri Aug 13, 2010 7:42 am ]
Post subject:  Re: FS: 89 tin top $2000 engineered.
so you parting it out yet???

I'll take the dash cluster if ya are :D :D
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/