| auszookers.com https://auszookers.com/forum/ |
|
| Vitara Bunning's Flares - FREE https://auszookers.com/forum/viewtopic.php?f=7&t=13297 |
Page 1 of 1 |
| Author: | redzook91 [ Mon Jul 05, 2010 6:24 am ] |
| Post subject: | Vitara Bunning's Flares - FREE |
Just made up some lawn edging flares for my vit and there was enough left over to do another set, and I was bored. Measurements are approx. 110mm for the fronts and 121mm for the rears (based on LWB wheel arches, don't know if SWB's are different). 
PM me for Pick-up address cause I'm not posting, don't be lazy 
Cheers |
|
| Author: | Bucket [ Mon Jul 05, 2010 7:15 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
Just curious, how wide are they and what did it cost you per meter? I need some flares badly but all the proper ones are fucking expensive! |
|
| Author: | redzook91 [ Mon Jul 05, 2010 7:28 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
They're 75mm wide so I reckon they'd be wide enough to fit your monsters under them. You can also get them as 100mm wide if not... The 75mm was about $2.50 a metre and the 100mm was $3.20 from memory, and they come in 10 metre rolls which is enough for 2 sets, apparently .
I would have loved some proper flares but for 25 bucks I'm more than happy settling for these. |
|
| Author: | Bucket [ Mon Jul 05, 2010 7:59 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
Oh shit, I guess i'll make a special trip later this week then. Too bad the closest bunnings is about an 1.5hrs away. 100mm would probably be better for me anyway. Cheers for the info 
|
|
| Author: | redzook91 [ Mon Jul 05, 2010 8:04 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
You might want to call ahead and make sure they have them, 1.5 hours to find out they're out of stock would be a right kick in the teeth.. It's just called 'Lawn Edge', ALM Industries product, 100mm x 10m is the one you'd be after. |
|
| Author: | Bucket [ Mon Jul 05, 2010 8:21 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
Oh yeah, of course I would. Looks to hold it's shape a fair bit more then I thought. |
|
| Author: | buzbox [ Mon Jul 05, 2010 8:52 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
Bucket wrote: all the proper ones are fucking expensive!
Mate, $80 from clark rubber isn't all that expensive. they have 2 sizes to choose from, I got the smaller one which is just perfect. |
|
| Author: | redzook91 [ Mon Jul 05, 2010 8:53 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
They are pretty solid, really dense plastic stuff. I thought they'd be sort of floppy (lol) but they are quite stiff (giggity). |
|
| Author: | Bucket [ Mon Jul 05, 2010 9:03 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
buzbox wrote: Bucket wrote: all the proper ones are fucking expensive! Mate, $80 from clark rubber isn't all that expensive. they have 2 sizes to choose from, I got the smaller one which is just perfect. Maybe the Clark Rubber near you, but the closest one to me (1.5hrs away) want about $20/m, and from what I measured I want 6meters |
|
| Author: | colesy123 [ Mon Jul 05, 2010 9:19 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
Mate where abouts in brissy are you?? Im happy to come up and grab them from you time and a place??
|
|
| Author: | redzook91 [ Mon Jul 05, 2010 9:29 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
colesy123 wrote: Mate where abouts in brissy are you?? Im happy to come up and grab them from you
time and a place??Whenever you want mate, I'm free for the rest of the week. PM me your number and we'll go from there. |
|
| Author: | colesy123 [ Mon Jul 05, 2010 10:06 am ] |
| Post subject: | Re: Vitara Bunning's Flares - FREE |
mate just waiting on peeeeete to get back to me about the rollbar so im not making two trips - if someone else wants them and can pick them up right away then let them take them. if he gets back to me and we can sort out a time for this week ill give you a shout cheers colesy |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|