| auszookers.com https://auszookers.com/forum/ |
|
| Grand Vitara Front Diff Centre https://auszookers.com/forum/viewtopic.php?f=7&t=13347 |
Page 1 of 1 |
| Author: | buzbox [ Wed Jul 07, 2010 12:08 am ] |
| Post subject: | Grand Vitara Front Diff Centre |
Grand Vitara front Diff Centre and other bits and pieces incl ring and pinion. These are left over's from my GV Steel diff swap, The pinion that is in the alloy housing is a GV pinion. The diff dude started to put the GV gear back into the alloy housing when he wasn't suppose to, so it would need to be pressed out. It comes with a few other bits and pieces to make it all complete. $150 
|
|
| Author: | tanshi [ Wed Jul 07, 2010 12:33 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
any chance you can do a tooth count on the ring and pinion please? |
|
| Author: | buzbox [ Wed Jul 07, 2010 12:49 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Pinion = 10 Ring = 43 On the reciept from Suzifour wreckers it says 4.3 = 43x10 to suit '98 Grand Vitara There appears to be very little to no wear on it. Chances are it's never been engaged into 4wd. Here are some photo's before being removed from the steel housing. 
|
|
| Author: | BlueSuzy [ Wed Jul 07, 2010 1:26 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Whats with the hose? |
|
| Author: | want33s [ Wed Jul 07, 2010 1:39 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
BlueSuzy wrote: Whats with the hose?
Vacuum actuator cause GV's don't have locking hubs. |
|
| Author: | BlueSuzy [ Wed Jul 07, 2010 3:14 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
ooohh ok |
|
| Author: | DarkHorse [ Wed Jul 07, 2010 2:28 pm ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Slightly tangiential, but where did you get the diff swap done? Somewhere down in the 'gong? I'm starting to think about where to get mine done... |
|
| Author: | buzbox [ Thu Jul 08, 2010 8:05 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Joe at Wollongong diesil & 4WD di mine, but any gearbox or diff specialist can do it. |
|
| Author: | steak_knife [ Thu Jul 08, 2010 9:50 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
want33s wrote: BlueSuzy wrote: Whats with the hose? Vacuum actuator cause GV's don't have locking hubs. Nope, cv;'s constantly spin & it lock's in the diff center, that's why we put man hub's on, to stop the bugger's spinning.. 
|
|
| Author: | buzbox [ Fri Jul 09, 2010 12:17 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
I also have a spare pair of those, I've put them up for sale too. |
|
| Author: | buzbox [ Wed Sep 08, 2010 7:53 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Up you go.. |
|
| Author: | royce [ Wed Sep 08, 2010 10:08 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
where is Bugsta and the other dude looking for a 4.3 ratio |
|
| Author: | buzbox [ Wed Sep 08, 2010 10:18 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Dunno where Bugsta is but the other dude has sent me a PM 
$OLD Payment pending |
|
| Author: | CairnsZook [ Wed Sep 08, 2010 10:29 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
The other dude is me
And I'm still looking for one more! |
|
| Author: | DSzuke [ Thu Sep 09, 2010 7:04 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
CairnsZook wrote: The other dude is me
And I'm still looking for one more! are you after a 4.3 R&P? I think I have one. (I did the swap but can't remember what I did with it) |
|
| Author: | CairnsZook [ Thu Sep 09, 2010 7:57 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Thats cool, I've already got one lined up. Bugsta might want it though. |
|
| Author: | DSzuke [ Thu Sep 09, 2010 9:13 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
I'm pretty sure I have the whole centre including r&p sitting in the garage somewhere if someone needs one. Can't see myself using it. |
|
| Author: | DarkHorse [ Thu Sep 09, 2010 9:24 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it. |
|
| Author: | TZAR [ Thu Sep 09, 2010 9:47 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
DarkHorse wrote: As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it.
Shep was after one I think |
|
| Author: | Bugsta [ Fri Sep 10, 2010 11:10 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Here I am
Just seen the link Royce posted. Obviously the housing being GV, it won't suit, but I take it the ring and pinion gears are interchangable with Jimny? |
|
| Author: | Bugsta [ Fri Sep 10, 2010 11:11 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
DarkHorse wrote: As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it.
What's the ratio? |
|
| Author: | DarkHorse [ Fri Sep 10, 2010 12:52 pm ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Whatever stock is for 01 GV V6 manual - 4.3? |
|
| Author: | buzbox [ Fri Sep 10, 2010 8:23 pm ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
It would be the same as this one advertised. |
|
| Author: | Bugsta [ Sat Sep 11, 2010 6:41 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
buzbox wrote: It would be the same as this one advertised.
Sorry missed it till now. Just got confirmation that the rear diffn compnents from a GV or ANY Vitara will not fit a jimny, and hence, not a Sierra. What a shame, thought I had a solution. |
|
| Author: | steak_knife [ Sat Sep 11, 2010 6:42 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Bugsta wrote: buzbox wrote: It would be the same as this one advertised. Sorry missed it till now. Just got confirmation that the rear diffn compnents from a GV or ANY Vitara will not fit a jimny, and hence, not a Sierra. What a shame, thought I had a solution. No shit?? That's probly why EVERY ONE has told you FRONT vit diff.. |
|
| Author: | royce [ Sat Sep 11, 2010 6:43 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
what are you on about? we are talking about GV FRONT here |
|
| Author: | Bugsta [ Sat Sep 11, 2010 7:05 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
ok cool. Is Dark Horse's a front or rear? |
|
| Author: | buzbox [ Sat Sep 11, 2010 7:43 am ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Maybe send him a PM to hear it from the dark horses mouth. 
I'm sure he's doing the same as what I've done. Steel diff swap, GV Diff leftover's, the same as what I've pictured above. |
|
| Author: | DarkHorse [ Sat Sep 11, 2010 12:48 pm ] |
| Post subject: | Re: Grand Vitara Front Diff Centre |
Yup - front diff housing swap - alloy to steel. GV internals and splinters of 1.6 alloy housing will be left over! PM replied Bugsta. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|