hutch wrote:
Might wanna pump up that front tyre
Bead's leaking I'd recon..
| auszookers.com https://auszookers.com/forum/ |
|
| 8 point sierra cage sold / tube bar sold https://auszookers.com/forum/viewtopic.php?f=7&t=13510 |
Page 1 of 1 |
| Author: | steve [ Tue Jul 13, 2010 6:26 am ] |
| Post subject: | 8 point sierra cage sold / tube bar sold |
8 point cage to suit a Sierra, comes with all plates and bolts. could use some new paint. Sold SOLD Tubebar to suit Sierra, mounts to inside of chassis rails so fits WT or NT. with some free spotlights. SOLD pick up only at Clontarf/Redcliffe Qld. I don't mind if you just want to come have a look and don't buy. |
|
| Author: | colesy123 [ Tue Jul 13, 2010 7:08 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
Hey Steve - PM sent |
|
| Author: | steve [ Tue Jul 13, 2010 7:24 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
replied. another side pic of the cage. has the dash bar. |
|
| Author: | hutch [ Tue Jul 13, 2010 7:38 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
Might wanna pump up that front tyre |
|
| Author: | steak_knife [ Tue Jul 13, 2010 7:45 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
hutch wrote: Might wanna pump up that front tyre
Bead's leaking I'd recon..
|
|
| Author: | MR1JZ [ Tue Jul 13, 2010 11:43 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
why does all the good stuff come up when im broke 
that cage is delicious |
|
| Author: | steak_knife [ Tue Jul 13, 2010 12:36 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
MR1JZ wrote: why does all the good stuff come up when im broke
that cage is delicious & VERY well made 
|
|
| Author: | steve [ Tue Jul 13, 2010 7:31 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
someone asked if the bar will take a winch. It may not have enough space for a winch and you would also need to reinforce the mounts as it was not designed for a winch. and, it's still available. |
|
| Author: | unique_seek [ Wed Jul 14, 2010 7:09 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
what size is the pipe on the cage and bar? |
|
| Author: | Fatzook [ Wed Jul 14, 2010 8:03 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
unique_seek wrote: what size is the pipe on the cage and bar?
cage is 32NB, with some supports/ gussets being 20nb? |
|
| Author: | brodie03 [ Wed Jul 14, 2010 9:27 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
PM Sent |
|
| Author: | steve [ Wed Jul 14, 2010 9:37 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
PMs replied to. Bar is still here. |
|
| Author: | royce [ Wed Jul 14, 2010 10:31 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
Fatzook wrote: unique_seek wrote: what size is the pipe on the cage and bar? cage is 32NB, with some supports/ gussets being 20nb? Doubt its made of pipe, Craig doesnt own pipe dies I dont think |
|
| Author: | Fatzook [ Wed Jul 14, 2010 10:38 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
royce wrote: Fatzook wrote: unique_seek wrote: what size is the pipe on the cage and bar? cage is 32NB, with some supports/ gussets being 20nb? Doubt its made of pipe, Craig doesnt own pipe dies I dont think 1 3/4 CDS? |
|
| Author: | royce [ Wed Jul 14, 2010 11:03 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
might be and whatever teh next size up is and the good shit to be used in cams events, hence the price |
|
| Author: | JenJen [ Wed Jul 14, 2010 12:25 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
hey mate r your front flares for sale |
|
| Author: | steve [ Wed Jul 14, 2010 7:32 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
yeah all flares are for sale. They're on another for sale thread. They are welded on to the panels, so you can either cut them off, shouldn't be too hard, or just stick the panels on. $20 per front panel. Flares have a few dents. $40 for the red tub with flares on it. |
|
| Author: | mrw82 [ Thu Jul 15, 2010 12:01 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
PM sent |
|
| Author: | steve [ Thu Jul 15, 2010 7:19 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
tube bar is sold cage is still here |
|
| Author: | sierra_666 [ Thu Jul 22, 2010 3:14 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
so guessing the cage would pass an engineers cert? have you had harness's attached to it? would cage be suitable for harness anchor point? |
|
| Author: | steve [ Thu Jul 22, 2010 7:15 pm ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
i guess it would, never had the car registered so i didn't worry about it. yeah, had harness attached to the harness bar you could weld an anchor point on or create a anchor point somehwere else, like on the floor, rear seat belt point etc. |
|
| Author: | Scrawny [ Fri Jul 23, 2010 10:58 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
Could we make the cage fit my Charade? |
|
| Author: | steve [ Fri Jul 23, 2010 11:00 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
yes,.... i think we might have to cut the roof off to get it in. |
|
| Author: | Scrawny [ Fri Jul 23, 2010 11:02 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
steve wrote: yes,.... i think we might have to cut the roof off to get it in.
I've seen your fabbing skills, we should be ok 
|
|
| Author: | steve [ Fri Jul 23, 2010 11:07 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
yer, i'm pretty confident about cutting the roof off, not sure how well it will go back on, but we'll see. ok, i have the cage and the car here, do you want me to try fit it tomorrow? you don't need to be here. PS. it might stick out the top a little bit
|
|
| Author: | Scrawny [ Fri Jul 23, 2010 11:13 am ] |
| Post subject: | Re: 8 point sierra cage / tube bar |
Maybe just leave the roof off? Might make a cool convertible? Maybe I should come get it before you get any ideas 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|