auszookers.com
https://auszookers.com/forum/

cleaning out the shed updated 30/9
https://auszookers.com/forum/viewtopic.php?f=7&t=14201
Page 1 of 2

Author:  finlay113 [ Mon Aug 09, 2010 8:32 am ]
Post subject:  cleaning out the shed updated 30/9

Time to have a bit of a clean up

vitara 1.6 clutch cable. good condition. just a tear in the rubber on the bottom. $ 15
Drover Headlights n frames X4 $10 each
Vitara steering column with barrel and key $20
Sierra petrol tank $40
Custom rear bar and tow bar suit 2 inch body lift with LED tail lights $100
Vitar dash loom and switches $10
sierra steering box x2 $65 each
WT rear centre. perfect condition $250
NT front centre $100
rear seat out of WT $80
1.3 airbox $20
2 1/2 inch stainless snorkel. made for 1.6 conversion $200
1 ltr transfer case. no switch. $80
1 ltr front tail shaft $40
1.3 spindles and hubs $50 for a pair.


Got more stuff lying around. let me know what you need. have a few sierras here im wrecking. if you need anythin let me know. Stuff located in ballarat Vic, will post smaller items

Author:  finlay113 [ Mon Aug 09, 2010 8:33 am ]
Post subject:  Re: Stuff lying around

Snake racing stuff and custom bar is to suit sierra

Author:  ajsr [ Mon Aug 09, 2010 8:35 am ]
Post subject:  Re: Stuff lying around

ill take the starter if its good
cheers andrew

Author:  finlay113 [ Mon Aug 09, 2010 8:37 am ]
Post subject:  Re: Stuff lying around

No worries. Starter was fine

Author:  rpmwrx [ Mon Aug 09, 2010 8:37 am ]
Post subject:  Re: Stuff lying around

i may be interested in the rear bar...

would you be able to post some pics?

thanks...

Ross

Author:  finlay113 [ Mon Aug 09, 2010 8:39 am ]
Post subject:  Re: Stuff lying around

Yeah I'll put a pic up shortly

Author:  finlay113 [ Mon Aug 09, 2010 9:31 am ]
Post subject:  Re: Stuff lying around

some pics
roll bar to suit high top $180 SOLD
wheel bearing kit. pretty sure it suits NT $40
vitara dash $40

Author:  819FKA [ Mon Aug 09, 2010 10:20 am ]
Post subject:  Re: Stuff lying around for sale

pics of high steer arm???

Author:  neofitou [ Mon Aug 09, 2010 10:21 am ]
Post subject:  Re: Stuff lying around for sale

Got any wide track diffs (end to end) in those sierras you are wrecking?

Author:  bogfrog [ Mon Aug 09, 2010 10:22 am ]
Post subject:  Re: Stuff lying around for sale

Snake racing tail shaft spacer $30

WT or NT spacing? thickness?

Author:  finlay113 [ Mon Aug 09, 2010 10:25 am ]
Post subject:  Re: Stuff lying around for sale

819FKA wrote:
pics of high steer arm???

the snake racing high steer is a whole new casting. knuckle and steering arm. dont habve pics. have a look on the snake racign website. or i can take some tomorrow.

the tail shaft spacer is approx 10-11mm. out of a narrow track. but its got 2 sets of wholes. the other wholes are bigger so ill check if it mates up to a WT shaft for you. ill measure prop tomorrow.

and both the sierras are NT sorry

Author:  bogfrog [ Mon Aug 09, 2010 10:27 am ]
Post subject:  Re: Stuff lying around for sale

Cool 8) i'll take the spacer then cheers, PM comin' your way! :wink:

Author:  finlay113 [ Mon Aug 09, 2010 10:31 am ]
Post subject:  Re: Stuff lying around for sale

no worries

Author:  finlay113 [ Tue Aug 10, 2010 1:36 am ]
Post subject:  Re: Stuff lying around for sale

bump. need room in the shed

Author:  birko [ Tue Aug 10, 2010 9:50 am ]
Post subject:  Re: Stuff lying around for sale

Wt dash cluster?

Author:  finlay113 [ Tue Aug 10, 2010 9:58 am ]
Post subject:  Re: Stuff lying around for sale

Both vehicles areNT

Author:  finlay113 [ Wed Aug 11, 2010 2:36 am ]
Post subject:  Re: Stuff lying around for sale

snakre racing high steer kit is same as this $950 from snake racing

Author:  finlay113 [ Sat Aug 14, 2010 11:37 am ]
Post subject:  Re: Stuff lying around for sale

Bump

Author:  pinz6x6 [ Sat Aug 14, 2010 11:54 am ]
Post subject:  Re: Stuff lying around for sale

Have you got a pair of doors and windscreen surround?

Author:  finlay113 [ Sat Aug 14, 2010 12:28 pm ]
Post subject:  Re: Stuff lying around for sale

I have a cOuple of doors. Not real good though. No window surround

Author:  finlay113 [ Tue Aug 17, 2010 4:27 am ]
Post subject:  Re: Stuff lying around for sale *MORE BITS UDATED*

price updates. still got lots of spares to get rid off. let me know what you need

Author:  imatt [ Wed Aug 18, 2010 10:59 am ]
Post subject:  Re: Stuff lying around for sale *MORE BITS UDATED*

Do you have an ignition barrel and key for sierra/drover? Also do you have a timing belt cover for 1.3l in good cond?
Cheers Matt

Author:  finlay113 [ Wed Aug 18, 2010 1:05 pm ]
Post subject:  Re: Stuff lying around for sale *MORE BITS UDATED*

no barrel n keys. im pretty sure i have a timing cover. ill check tomorrow

Author:  finlay113 [ Thu Sep 23, 2010 5:19 am ]
Post subject:  Re: cleaning out the shed updated 23/9

bump

Author:  finlay113 [ Thu Sep 30, 2010 8:16 am ]
Post subject:  Re: cleaning out the shed updated 30/9

bummp

Author:  maloo11 [ Thu Sep 30, 2010 9:09 am ]
Post subject:  Re: cleaning out the shed updated 30/9

Steering boxes in good order?

Author:  finlay113 [ Thu Sep 30, 2010 9:17 am ]
Post subject:  Re: cleaning out the shed updated 30/9

Yeah mate

Author:  redrocketsj50 [ Thu Sep 30, 2010 12:49 pm ]
Post subject:  Re: cleaning out the shed updated 30/9

how much posted for the snorkle to 3850 sale ,victoria :)

Author:  Proxy [ Fri Oct 15, 2010 8:04 pm ]
Post subject:  Re: cleaning out the shed updated 30/9

my steering's no good when the wheel is in the middle, would a steering box cure this as the steering is fine otherwise,

if so would you post to WA 6104?

cheers

Author:  Built4thrashing [ Fri Oct 15, 2010 8:44 pm ]
Post subject:  Re: cleaning out the shed updated 30/9

Proxy wrote:
my steering's no good when the wheel is in the middle, would a steering box cure this as the steering is fine otherwise,

if so would you post to WA 6104?

cheers



Have you tried to tighten the adjusting screw on top of the box? and whats your steering damper like?


B4T

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/