| auszookers.com https://auszookers.com/forum/ |
|
| Lockright Lockers https://auszookers.com/forum/viewtopic.php?f=7&t=14490 |
Page 1 of 1 |
| Author: | PJ.zook [ Sat Aug 21, 2010 9:59 pm ] |
| Post subject: | Lockright Lockers |
Gday u lot. Just getting bothered to sell the two Lockrights I have sitting here. Bought them for a mate at same time I got lockers for me and Jas, other mate no longer wants em. They are brand new never been used genuine Lock Right Richmond lockers for 1.3 zooks. One set is the 1510 model which doesnt come with couplers and uses your sidegears. $300 Other set is the 1530 model which comes with couplers so you dont have to use your sidegears. $400 |
|
| Author: | pyrohamish [ Sun Aug 22, 2010 12:31 am ] |
| Post subject: | Re: Lockright Lockers |
Do they suit front and rear? |
|
| Author: | PJ.zook [ Sun Aug 22, 2010 12:36 am ] |
| Post subject: | Re: Lockright Lockers |
They are made to suit the 4 pin rear, but you can put them in the front. I used the 1530 in my two pin front, but you have to run aftermarket 26 spline axles. Or you can use the 1510 kit in two pin front with the sidegears and standard axles like mate has done. |
|
| Author: | Built4thrashing [ Sun Aug 22, 2010 9:38 am ] |
| Post subject: | Re: Lockright Lockers |
Ive got 1510's front and rear. work well. they just use you existing side gears and seem to be a little easier on the axles than the 1530 lockright. B4T |
|
| Author: | pyrohamish [ Sun Aug 22, 2010 10:30 am ] |
| Post subject: | Re: Lockright Lockers |
Good new then, thats the one i bought, locker in the front, weld the rear. |
|
| Author: | nishi1 [ Mon Aug 23, 2010 6:25 am ] |
| Post subject: | Re: Lockright Lockers |
do u guys know any one who nows how to weld the rear diff i have a spare one and want it done. |
|
| Author: | matty87 [ Mon Aug 23, 2010 7:05 am ] |
| Post subject: | Re: Lockright Lockers |
the lockrs still for sale? |
|
| Author: | PJ.zook [ Mon Aug 23, 2010 7:36 am ] |
| Post subject: | Re: Lockright Lockers |
matty87 wrote: the lockrs still for sale?
Only the 1530 (the one with couplers) with free postage in aus |
|
| Author: | PJ.zook [ Mon Aug 23, 2010 7:37 am ] |
| Post subject: | Re: Lockright Lockers |
nishi1 wrote: do u guys know any one who nows how to weld the rear diff i have a spare one and want it done.
Ask B4T, he may have a welded diff you could use instead of welding another one. |
|
| Author: | matty87 [ Mon Aug 23, 2010 7:55 am ] |
| Post subject: | Re: Lockright Lockers |
mate my pm dosent seam to be working any chance of sending me a pm with your contact details so i can email you etc im pretty keen |
|
| Author: | Built4thrashing [ Mon Aug 23, 2010 11:03 am ] |
| Post subject: | Re: Lockright Lockers |
My welded ctr is fucked. no use to anyone unless yo work at a scrap metal place. But i do know people that can weld them up for you. B4T |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|