auszookers.com
https://auszookers.com/forum/

[NSW] Parting 95 hardtop sierra - Newcastle
https://auszookers.com/forum/viewtopic.php?f=7&t=14630		 Page 1 of 2
Author:  ck13488 [ Sat Aug 28, 2010 11:34 am ]
Post subject:  [NSW] Parting 95 hardtop sierra - Newcastle
got a 95 hartop sierra im parting out.

keeping the gearbox, head, diffs, transfer, WT flares

roof racks $30
1.3 alternator $25
dash (glove box hinge is broken) $25
cluster with harness (has a chip as shown) $20
stock steering wheel$5
rear door with tinted glass $75
tinted side glass $20 each
one half of rear seat + belt $20
sierra badges from front guards $20 pair
indicators $20 pair
fuel tank $50
body, no front clip or doors, with rear door $100
body, no rear door, no doors$50
brake booster etc$50
steering column plastic cover $10
engine fan $5
steering box $50
engine bay splash guard $10
coil $10

various 1.3 engine bits...tell me what you need :)



if somethings not shown ask me.
pickup from medowie or beresfield
willing to post smaller items.

ImageImage
ImageImageImageImage
ImageImageImageImage
Image
Author:  lump_a_charcoal [ Sat Aug 28, 2010 12:48 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Body?
Author:  ck13488 [ Sat Aug 28, 2010 12:51 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
ck13488 wrote:
bare body $100
Author:  Chopz [ Sat Aug 28, 2010 3:22 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
PM sent for dash cluster and badges
Author:  lump_a_charcoal [ Sat Aug 28, 2010 10:45 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
WHat sort of condition is the body in?
Author:  ck13488 [ Sat Aug 28, 2010 11:28 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Body is pretty straight, paint has scratches. Support that runs through middle of headlining is bent. Surface rust where plastic sills were. Can get pics of specific parts if you want
Author:  lump_a_charcoal [ Sat Aug 28, 2010 11:39 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Sounds too good to cut up.
Author:  31zook [ Sun Aug 29, 2010 1:09 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
you can cut mine up :D
Author:  ck13488 [ Sun Aug 29, 2010 1:20 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
lump_a_charcoal wrote:
Sounds too good to cut up.

What part do you want? I like using the 9 inch!!!
Author:  lump_a_charcoal [ Sun Aug 29, 2010 1:56 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
I want to end up with a ute cab, but I don't really have the skills to make a hardtop into a cab - the part about the back edge of the roof scares me, joining it into a rear wall would be beyond me I fear.


I'll just find a stockman cab or a SWB soft top I think.


On with the for sale thread.


[/hijack]
Author:  chadd1981 [ Tue Aug 31, 2010 10:20 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
would you sell the windscreen separately?? hwo much??
Author:  ck13488 [ Wed Sep 01, 2010 2:28 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
chadd1981 wrote:
would you sell the windscreen separately?? hwo much??
Windscreen has a small crack in it, I'll get a pic up for you
Author:  Tonka4 [ Wed Sep 01, 2010 5:30 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
PM sent :D
Author:  Jccck [ Wed Sep 01, 2010 5:56 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Half of this car is now on mine haha
Bonnet, Doors, WiperMotor.. Now Front Guards :D

Also curious, what is an "Engine Bay Splash Guard?"
Author:  ck13488 [ Wed Sep 01, 2010 8:02 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Jccck wrote:
Half of this car is now on mine haha
Bonnet, Doors, WiperMotor.. Now Front Guards :D

Also curious, what is an "Engine Bay Splash Guard?"

I'll show you when you get the guards
Author:  lump_a_charcoal [ Wed Sep 01, 2010 8:14 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
It's the inner guard, no?
Author:  ck13488 [ Wed Sep 01, 2010 12:10 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
lump_a_charcoal wrote:
It's the inner guard, no?

no its a piece of moulded plastic that sits under the radiator and attatches to either side of the engine bay and the chassis crossmember
Author:  Jccck [ Thu Sep 02, 2010 1:49 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
ck13488 wrote:
lump_a_charcoal wrote:
It's the inner guard, no?

no its a piece of moulded plastic that sits under the radiator and attatches to either side of the engine bay and the chassis crossmember


Sounds funky, i'll see it this arvo i guess
Author:  lump_a_charcoal [ Thu Sep 02, 2010 1:54 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
ck13488 wrote:
lump_a_charcoal wrote:
It's the inner guard, no?

no its a piece of moulded plastic that sits under the radiator and attatches to either side of the engine bay and the chassis crossmember


Oh that thing...
Author:  steak_knife [ Thu Sep 02, 2010 6:18 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
lump_a_charcoal wrote:
ck13488 wrote:
lump_a_charcoal wrote:
It's the inner guard, no?

no its a piece of moulded plastic that sits under the radiator and attatches to either side of the engine bay and the chassis crossmember


Oh that thing...


:P Hold's the brake line up to!! :P
Author:  ck13488 [ Fri Sep 10, 2010 12:34 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
need this shit gone!
Author:  shakes [ Fri Sep 10, 2010 5:16 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
if your willing to send the roof racks to 3070 (vic) then I'll take em
Author:  lump_a_charcoal [ Fri Sep 10, 2010 10:51 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
How much for indicator stalk, with postage to 2749?
Author:  ck13488 [ Mon Sep 27, 2010 6:56 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
been flat out with uni but on holidays now so got time to get back to everyone, sort out postage etc.

make me an offer!
Author:  Coastline [ Tue Sep 28, 2010 4:04 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Could you please send me your phone number as I am interested in the cab, back door and rear bar. Is it a coil or leaf spring cab? and is there any rust in the cab or door.
Cheers
Author:  Jccck [ Tue Sep 28, 2010 6:05 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
ck13488 wrote:
been flat out with uni but on holidays now so got time to get back to everyone, sort out postage etc.

make me an offer!


Have you sorted out if i can get the rear flares yet? I'm cool to come around and help you cut them off if you wish
Author:  shakes [ Tue Sep 28, 2010 9:24 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
shakes wrote:
if your willing to send the roof racks to 3070 (vic) then I'll take em


???
Author:  Jccck [ Tue Sep 28, 2010 1:57 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
Coastline wrote:
Could you please send me your phone number as I am interested in the cab, back door and rear bar. Is it a coil or leaf spring cab? and is there any rust in the cab or door.
Cheers


95, it's leaf
Author:  pezz [ Tue Sep 28, 2010 9:28 pm ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
when would suit to pick up the body?
Author:  ck13488 [ Sun Oct 10, 2010 3:06 am ]
Post subject:  Re: [NSW] Parting 95 hardtop sierra - Newcastle
pezz wrote:
when would suit to pick up the body?

still want the body?
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/