| auszookers.com https://auszookers.com/forum/ |
|
| diy bodylift https://auszookers.com/forum/viewtopic.php?f=7&t=14737 |
Page 1 of 1 |
| Author: | Hawky4X4 [ Wed Sep 01, 2010 10:57 am ] |
| Post subject: | diy bodylift |
Has anyone done there own bodylift because ive just put in a 1.6 injected and ive got the body off (hoping to drop the body on over the motor  ) but i was thinking of lifting the body a bit just to have a bit more clearance. Ive been looking at kits you can buy but they seem exspensive for wat you get and wat they do. 
Only wanting to lift 1" so if anyone knows about this it would be great 
|
|
| Author: | shep [ Wed Sep 01, 2010 11:33 am ] |
| Post subject: | Re: diy bodylift |
just buy a 50mm jobbie off just cruising and you will be laughing. 
|
|
| Author: | DarkHorse [ Wed Sep 01, 2010 1:15 pm ] |
| Post subject: | Re: diy bodylift |
Wot ee sed. |
|
| Author: | hooki [ Wed Sep 01, 2010 2:56 pm ] |
| Post subject: | Re: diy bodylift |
yeah the just cruising kit is good value for money mate. I think you need a minimum of 1inch body lift to clear the 1.6 efi. |
|
| Author: | steak_knife [ Thu Sep 02, 2010 6:16 am ] |
| Post subject: | Re: diy bodylift |
hooki wrote: yeah the just cruising kit is good value for money mate. I think you need a minimum of 1inch body lift to clear the 1.6 efi.
I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift.. |
|
| Author: | ZookiMonsta [ Thu Sep 02, 2010 6:54 am ] |
| Post subject: | Re: diy bodylift |
steak_knife wrote: I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift..
What about a carby job? |
|
| Author: | Joe [ Thu Sep 02, 2010 7:04 am ] |
| Post subject: | Re: diy bodylift |
ZookiMonsta wrote: steak_knife wrote: I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift.. What about a carby job? Yep my black sierra had a 8valve 1600 without a bodylift
|
|
| Author: | ZookiMonsta [ Thu Sep 02, 2010 7:16 am ] |
| Post subject: | Re: diy bodylift |
Joe wrote: ZookiMonsta wrote: steak_knife wrote: I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift.. What about a carby job? Yep my black sierra had a 8valve 1600 without a bodyliftHow tight of a fit is it? 
|
|
| Author: | Hawky4X4 [ Thu Sep 02, 2010 8:31 am ] |
| Post subject: | Re: diy bodylift |
oh crap just realised i wrote this up in the wrong section haha  .
yer sweet ill have a look at that just cruisin kit cheers, the bodys not on yet so i dont know how close it'll be but it'll have 2 stay injected. cheers fellas |
|
| Author: | Bruce [ Thu Sep 02, 2010 8:37 am ] |
| Post subject: | Re: diy bodylift |
Hawky4X4 wrote: oh crap just realised i wrote this up in the wrong section haha
.yer sweet ill have a look at that just cruisin kit cheers, the bodys not on yet so i dont know how close it'll be but it'll have 2 stay injected. cheers fellas Jc's Kits are the go mate. really well made and he has sold lots all without a worry that I know of.
|
|
| Author: | JrZook [ Thu Sep 02, 2010 9:13 am ] |
| Post subject: | Re: diy bodylift |
steak_knife wrote: hooki wrote: yeah the just cruising kit is good value for money mate. I think you need a minimum of 1inch body lift to clear the 1.6 efi. I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift..
|
|
| Author: | ZookiMonsta [ Thu Sep 02, 2010 9:29 am ] |
| Post subject: | Re: diy bodylift |
JrZook wrote: steak_knife wrote: hooki wrote: yeah the just cruising kit is good value for money mate. I think you need a minimum of 1inch body lift to clear the 1.6 efi. I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift.. I know it fits, but what kinda clearance is there? |
|
| Author: | bigrig91 [ Thu Sep 02, 2010 10:05 am ] |
| Post subject: | Re: diy bodylift |
coilys have heaps of room for an 8 valve 1.6 without body lift mate... |
|
| Author: | Fatzook [ Thu Sep 02, 2010 10:33 am ] |
| Post subject: | Re: diy bodylift |
JrZook wrote: steak_knife wrote: hooki wrote: yeah the just cruising kit is good value for money mate. I think you need a minimum of 1inch body lift to clear the 1.6 efi. I've seen many a 16v 1.6 vit eng in sierra's WITHOUT body lift.. X2
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|