As above comes with 2 rolls of wire .6 and .9 used and gauges and leads
works fine welds 10 mm bar no problem.
Have original book and spare wire rollers.
$400
Brisbane south side
Pm or 0404 457 708
reason for selling..
need cash and space.
| auszookers.com https://auszookers.com/forum/ |
|
| Mag Mate 180 Mig welder https://auszookers.com/forum/viewtopic.php?f=7&t=15039 |
Page 1 of 1 |
| Author: | squirezook [ Sun Sep 12, 2010 12:50 am ] |
| Post subject: | Mag Mate 180 Mig welder |
As above comes with 2 rolls of wire .6 and .9 used and gauges and leads works fine welds 10 mm bar no problem. Have original book and spare wire rollers. $400 Brisbane south side Pm or 0404 457 708 reason for selling.. need cash and space.
|
|
| Author: | steak_knife [ Sun Sep 12, 2010 1:02 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
I'm on the way!!!!! 
|
|
| Author: | PJ.zook [ Sun Sep 12, 2010 1:05 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
If only it were in melb |
|
| Author: | steak_knife [ Sun Sep 12, 2010 1:07 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
PJ.zook wrote: If only it were in melb
to late!!!
|
|
| Author: | lump_a_charcoal [ Sun Sep 12, 2010 1:18 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
Shit man, cheap! |
|
| Author: | BlueSuzy [ Sun Sep 12, 2010 3:23 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
Damn! Gotta be fast! |
|
| Author: | steak_knife [ Sun Sep 12, 2010 3:26 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
lump_a_charcoal wrote: Shit man, cheap! BlueSuzy wrote: Damn! Gotta be fast!
I'm starting to get a complex!! 
|
|
| Author: | shep [ Sun Sep 12, 2010 3:26 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
good score 
|
|
| Author: | steak_knife [ Sun Sep 12, 2010 3:29 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
shep wrote: good score
 Just have to get Botbot & helmet now..
|
|
| Author: | squirezook [ Sun Sep 12, 2010 3:51 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
Well that went quick. Thanks Steve and thanks for taking the 1.6 off me hands
Can't believe the ute is still there 
|
|
| Author: | lump_a_charcoal [ Sun Sep 12, 2010 4:03 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
If the ute was $400 I would grab it that quick too. |
|
| Author: | steak_knife [ Sun Sep 12, 2010 6:57 am ] |
| Post subject: | Re: Mag Mate 180 Mig welder |
squirezook wrote: Well that went quick.
Thanks Steve and thanks for taking the 1.6 off me hands Can't believe the ute is still there My pleasure mate!!
had to make more room in the shed tho.. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|