| auszookers.com https://auszookers.com/forum/ |
|
| Sierra ARB bar & stuff. https://auszookers.com/forum/viewtopic.php?f=7&t=15242 |
Page 1 of 3 |
| Author: | steak_knife [ Sun Sep 19, 2010 8:53 pm ] |
| Post subject: | Sierra ARB bar & stuff. |
Hi!! Some stuff I no longer need/want. 1. Arb front bar, non winch, bolt's to n/t & w/t, need's a paint. Has had a new bit welded in after someone cut the old bit out. $300ono Sold 2. front w/t diff housing with n/t perch's, has cv's but nothing else, knuckle's have some pitting but would paint up. you will need to use your swivel hub's, brake's & diff center. $75ono Sold 3. 5K toyota carby, no idea of condition as it's been under my bench for long time.. $30. 4. 1.3 complete eng, has early sign's of leaking head, ream main's leaking, was removed running perfect yesterday.$75ono No exhaust manifold.. 5. Sierra fuel tank, has small dent in it's bum, came out of a Lwb but the same as swb. $20. 6. Vit P/s, need's new h/pressure hose & pump mount./ $150 ono Sold 7. I also have 3 box's of assorted sierra bit's, ranging from cooling fan's to tail light assembles, tell me what you want & I'll see if I have it.. 8. Ing switch with full comp spec starter button, a must for all want to be comp spec racer's.... see pic.. 9. New in box Ci clutch kit & spigot, RR $198... Gone.. I'll update as the day goes on, all larger bit's are local pick up only, will post smaller an buyer's expense.. Bit's are on the Southside Brizzy!! |
|
| Author: | steak_knife [ Sun Sep 19, 2010 9:19 pm ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Some more pic's, cause we all like pic's.. |
|
| Author: | ozsteve [ Sun Sep 19, 2010 11:44 pm ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
interested in motor where r u located |
|
| Author: | steak_knife [ Mon Sep 20, 2010 12:50 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
ozsteve wrote: interested in motor where r u located
Southside Brizzy.. I have one other interested in the eng, I DO NOT hold part's, first in get it.. |
|
| Author: | lauby [ Mon Sep 20, 2010 3:00 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
have you got free wheeling hub assembly for a 89 WT, and or a wheel spindle for same ? |
|
| Author: | hutch [ Mon Sep 20, 2010 3:13 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
I been I seen and I walked away, with something in my hand... Thanks steak_knife, look forward to having a wheel with ya at Ripley sometime. |
|
| Author: | want33s [ Mon Sep 20, 2010 3:20 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Don't forget I want any rear side gears you may have. |
|
| Author: | steak_knife [ Mon Sep 20, 2010 3:57 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
lauby wrote: have you got free wheeling hub assembly for a 89 WT, and or a wheel spindle for same ?
Nope, the one's i have are spare part's & spare's.. |
|
| Author: | steak_knife [ Mon Sep 20, 2010 3:57 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
want33s wrote: Don't forget I want any rear side gears you may have.
Would I forget about you?? |
|
| Author: | dyllan1 [ Mon Sep 20, 2010 6:57 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
hey do you have any rubber bungs for the floors iam missing a couple |
|
| Author: | Scrawny [ Mon Sep 20, 2010 7:18 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Got any flux capacitors? I'm after a couple |
|
| Author: | hutch [ Mon Sep 20, 2010 7:30 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
ScrawnC wrote: Got any flux capacitors? I'm after a couple
hey McFly!
|
|
| Author: | eldo [ Mon Sep 20, 2010 7:40 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Is that you royce ? |
|
| Author: | Blueberry [ Mon Sep 20, 2010 7:56 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
hhmmmm, that arb bar IS very tempting. |
|
| Author: | ZookiMonsta [ Mon Sep 20, 2010 9:16 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Interested in stuff, so I sent you a PM Steakman |
|
| Author: | steak_knife [ Mon Sep 20, 2010 10:30 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
dyllan1 wrote: hey do you have any rubber bungs for the floors iam missing a couple
No stock of them, thay seem to fall out all the time.. |
|
| Author: | steak_knife [ Mon Sep 20, 2010 10:30 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Blueberry wrote: hhmmmm, that arb bar IS very tempting.
Then you could take another pic in my driveway for your avatar.. |
|
| Author: | mrw82 [ Mon Sep 20, 2010 10:40 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
any chance of a clearer pic of the fix up on the arb bar. very interested mate. |
|
| Author: | steak_knife [ Mon Sep 20, 2010 10:44 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
mrw82 wrote: any chance of a clearer pic of the fix up on the arb bar. very interested mate.
I'll get one in the morn, bin in that shed all day.. |
|
| Author: | Verm1n [ Mon Sep 20, 2010 10:44 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
pm sent.. also how many flux capacitors do you have?? Interested |
|
| Author: | steak_knife [ Mon Sep 20, 2010 11:09 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Verm1n wrote: pm sent.. also how many flux capacitors do you have?? Interested
|
|
| Author: | stockman [ Mon Sep 20, 2010 11:28 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Will you post the bar? |
|
| Author: | steak_knife [ Mon Sep 20, 2010 11:29 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
stockman wrote: Will you post the bar?
|
|
| Author: | Fatzook [ Mon Sep 20, 2010 11:31 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
steak_knife wrote: stockman wrote: Will you post the bar? ![]() Why not? |
|
| Author: | stockman [ Mon Sep 20, 2010 11:33 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
Wrap it in cardboard and write my address on it. I will organise the rest. |
|
| Author: | steak_knife [ Tue Sep 21, 2010 7:41 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
stockman wrote: Wrap it in cardboard and write my address on it. I will organise the rest.
|
|
| Author: | ZookiMonsta [ Tue Sep 21, 2010 7:50 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
steak_knife wrote: stockman wrote: Wrap it in cardboard and write my address on it. I will organise the rest. Just show this page to Brenden... He'll know what to do. Then again. |
|
| Author: | mrw82 [ Tue Sep 21, 2010 8:55 am ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
pics yet? |
|
| Author: | steak_knife [ Tue Sep 21, 2010 1:12 pm ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
mrw82 wrote: pics yet?
No, forgot, had to much to do on sully, she's almost done so I'll drag it out & get some.. |
|
| Author: | the-ninja-kid [ Tue Sep 21, 2010 11:44 pm ] |
| Post subject: | Re: Sierra ARB bar & stuff. |
got any body lift bolts? (the ones ones that are threaded on the inside?) |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|