lauby wrote:
i have a 1990 1l maruti. current engine status ' KNOCK KNOCK KNOCK ', any one know if the engine advertised above will bolt in ?
make a reasonable offer and organise own freight and we will see if we can do business
| auszookers.com https://auszookers.com/forum/ |
|
| F10A engine and parts https://auszookers.com/forum/viewtopic.php?f=7&t=16632 |
Page 1 of 1 |
| Author: | dellcharity [ Wed Nov 10, 2010 4:21 am ] |
| Post subject: | F10A engine and parts |
i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry engine $500 5 speed $300 new clutch to suit $100 still in box with bearings carb $150 new alternator $70 package deal $800 + freight have pics can email steve 0459340771 |
|
| Author: | Highway-Star [ Wed Nov 10, 2010 6:18 am ] |
| Post subject: | Re: F10A engine and parts |
dellcharity wrote: i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry
engine $500 5 speed $300 new clutch to suit $100 still in box with bearings carb $150 new alternator $70 package deal $800 + freight have pics can email steve 0459340771 So the gearbox came from a super carry too? If so, I might be interested, though not for $300. |
|
| Author: | lauby [ Wed Nov 10, 2010 8:06 am ] |
| Post subject: | Re: F10A engine and parts |
i have a 1990 1l maruti. current engine status ' KNOCK KNOCK KNOCK ', any one know if the engine advertised above will bolt in ? |
|
| Author: | mrw82 [ Wed Nov 10, 2010 8:10 am ] |
| Post subject: | Re: F10A engine and parts |
the motor will but the intake manifold is different so you would have to use your original. same with engine mount brackets. not sure about the gearbox being any good for sierra though, (in an LJ it would be ok) |
|
| Author: | 303zuke [ Wed Nov 10, 2010 11:56 am ] |
| Post subject: | Re: F10A engine and parts |
mrw82 wrote: not sure about the gearbox being any good for sierra though, (in an LJ it would be ok)
No the Super Carry box won't work in an LJ80 because the bellhousing bolt pattern is rotated to lay the block at an angle. BUT, the rear case and selector shafts can be used with a Maruti/late 1.0 box to make a 5 speed that uses the LJ gear lever. |
|
| Author: | dellcharity [ Thu Nov 11, 2010 11:02 pm ] |
| Post subject: | Re: F10A engine and parts |
lauby wrote: i have a 1990 1l maruti. current engine status ' KNOCK KNOCK KNOCK ', any one know if the engine advertised above will bolt in ?
make a reasonable offer and organise own freight and we will see if we can do business
|
|
| Author: | 5ierra [ Thu Nov 11, 2010 11:05 pm ] |
| Post subject: | Re: F10A engine and parts |
dellcharity wrote: Highway-Star wrote: dellcharity wrote: i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry engine $500 5 speed $300 new clutch to suit $100 still in box with bearings carb $150 new alternator $70 package deal $800 + freight have pics can email steve 0459340771 So the gearbox came from a super carry too? If so, I might be interested, though not for $300. make a reasonable offer and organise own freight and we will see if we can do business Fixed, makes more sense as lauby was asking if it will bolt in, not making offer, where as highway was. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|