auszookers.com
https://auszookers.com/forum/

16x7 sierra/vitara rims
https://auszookers.com/forum/viewtopic.php?f=7&t=17446		 Page 1 of 1
Author:  Built4thrashing [ Sat Dec 11, 2010 10:09 pm ]
Post subject:  16x7 sierra/vitara rims
Got some 16x7 black steel rims to suit a sierra or a Vitara. offset is wrong to fit 5dr GV

They are basically new and still in the boxes. tyres have been fitted and the wheel weights have left minor marks .

$400.

pick up from Dandenong north.

interstate buyers to arrange own courier


Image

B4T
Author:  Fatzook [ Sat Dec 11, 2010 11:03 pm ]
Post subject:  Re: 16x7 sierra/vitara rims
what IS the offset?

I assume they hit the calipers? If this is the case they won't fit the SV series either. :cry:
Author:  Built4thrashing [ Sun Dec 12, 2010 1:21 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Offset is -11.

not sure on that as i dont have a SV vit to check.


B4T
Author:  Mugwui [ Sun Dec 12, 2010 1:26 am ]
Post subject:  Re: 16x7 sierra/vitara rims
GV is +5, but it's not just the offset you have to worry about, it's the profile of the centre as well.
Author:  Built4thrashing [ Sun Dec 12, 2010 1:32 am ]
Post subject:  Re: 16x7 sierra/vitara rims
the profile of the rim stud face is ok its just the curve of the rim that touches the caliper. it misses out on fitting by 10mm. With a 0 or +5 offset it would fit no probs. Other option is to get some wheel spacers but i dont want to do that.


B4T
Author:  Mugwui [ Sun Dec 12, 2010 1:43 am ]
Post subject:  Re: 16x7 sierra/vitara rims
I did the same thing, bought F100 wheels to find out I needed wheel spacers.
I tried to have wheels made, but no one was interested in making them.
Author:  Fatzook [ Sun Dec 12, 2010 1:49 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Mugwui wrote:
I did the same thing, bought F100 wheels to find out I needed wheel spacers.
I tried to have wheels made, but no one was interested in making them.


Go to 17's.
Author:  Mugwui [ Sun Dec 12, 2010 1:55 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Tried that too, they still touch the callapar.
Author:  Mugwui [ Sun Dec 12, 2010 1:57 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Hey Fatzook, just off topic, do you make cromeally Axels?
Broke mine today.
Author:  Built4thrashing [ Sun Dec 12, 2010 1:59 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Mugwui wrote:
Hey Fatzook, just off topic, do you make cromeally Axels?
Broke mine today.


you broke the GV axles?????? Can i ask what you were doing to do that?



B4T
Author:  Mugwui [ Sun Dec 12, 2010 2:05 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Broke both the cv's too, just climbing a very simple hill that I've been up several times before.
Author:  Fatzook [ Sun Dec 12, 2010 2:53 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Mugwui wrote:
Tried that too, they still touch the callapar.

Really? was it because the wheel centre was too ' flat'? ( if you get what I mean :? )
Author:  Fatzook [ Sun Dec 12, 2010 2:55 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Mugwui wrote:
Hey Fatzook, just off topic, do you make cromeally Axels?
Broke mine today.


Negative ghost rider.

That requires some expensive and specialized equipment that I do not have. :cry:

PM joeblow. He has the gear and smarts to make them though. :wink:
Author:  Mugwui [ Sun Dec 12, 2010 4:15 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Fatzook wrote:
Mugwui wrote:
Tried that too, they still touch the callapar.

Really? was it because the wheel centre was too ' flat'? ( if you get what I mean :? )


Yes, correct!
Author:  Fatzook [ Sun Dec 12, 2010 4:23 am ]
Post subject:  Re: 16x7 sierra/vitara rims
Mugwui wrote:
Fatzook wrote:
Mugwui wrote:
Tried that too, they still touch the callapar.

Really? was it because the wheel centre was too ' flat'? ( if you get what I mean :? )


Yes, correct!


Right :?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/