| auszookers.com https://auszookers.com/forum/ |
|
| lwb suzuki sierra 1.6 sprung over nt project or parts... https://auszookers.com/forum/viewtopic.php?f=7&t=18191 |
Page 1 of 1 |
| Author: | nick_bj40 [ Wed Jan 12, 2011 8:26 am ] |
| Post subject: | lwb suzuki sierra 1.6 sprung over nt project or parts... |
as staited i have a lwb with 1.6 5 speed sprung over nt diffs it has coily dash (very bling) coily doors and trims with small rust spots (very easy fixed) IT HAS RUST in usual places in back around gaurds, back floor, behind front seats i have begun repairing these spots as i am a boiler maker i cut out back inner gaurds and made tubs and got as far as tacking them in and got snowed under with other things and now have lost interest and need the room for my shorty. the body is in peices but i have all panels and vinal roof it also has side rails and bull bar with winch BUT these are welded to chassis which means they would need to be removed for rego rear tail gate hinges are welded to body also.. no seats no steering wheel no carby (i have a spare 1.3 carb if you want to chuck it on..) im chasing around $1000 but tell me what you think WHEN you look at it i also have a spare 1.6 g16b carb motor (alloy block) with 3 speed auto to go with it and wt rear diff, and some other panels not sure what i have there now that is all i can think of any questions plz inbox me or give me a buzz on 0425 113 536 |
|
| Author: | SuzzyBoy [ Thu Jan 13, 2011 8:41 am ] |
| Post subject: | Re: lwb suzuki sierra 1.6 sprung over nt project or parts... |
got any pictures mate? |
|
| Author: | barney7779 [ Fri Jan 14, 2011 9:43 pm ] |
| Post subject: | Re: lwb suzuki sierra 1.6 sprung over nt project or parts... |
Interested in selling the spare 1.6 and auto If so what sort of coin ya after Cheers Barney |
|
| Author: | nick_bj40 [ Fri Jan 14, 2011 11:24 pm ] |
| Post subject: | Re: lwb suzuki sierra 1.6 sprung over nt project or parts... |
sorry guys sold.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|