auszookers.com
https://auszookers.com/forum/

FS: WT rear lockright
https://auszookers.com/forum/viewtopic.php?f=7&t=18734		 Page 1 of 1
Author:  tanshi [ Tue Feb 01, 2011 3:56 am ]
Post subject:  FS: WT rear lockright
WT rear lockright in 3.7 centre good condition.

located Ipswich/Brisbane area.

$250
PM or txt 0400 136 455
Author:  tanshi [ Wed Feb 02, 2011 10:30 pm ]
Post subject:  Re: FS: WT rear lockright
bump
Author:  Fatzook [ Wed Feb 02, 2011 10:53 pm ]
Post subject:  Re: FS: WT rear lockright
So let me get this straight. You will pay me $300 to take your lockright?

Sorry mate but no deal. You'll need to offer me more than that :roll: :helloo:
Author:  tanshi [ Wed Feb 02, 2011 10:54 pm ]
Post subject:  Re: FS: WT rear lockright
RUDE! :)
Author:  ZookFisher [ Thu Feb 03, 2011 2:59 am ]
Post subject:  Re: FS: WT rear lockright
how old is it and why are you selling?
Author:  tanshi [ Thu Feb 03, 2011 3:02 am ]
Post subject:  Re: FS: WT rear lockright
PMed you

we upgraded to airlockers

its about 2 years old, only used in a weekend only car so hasnt done much milage
Author:  Built4thrashing [ Thu Feb 03, 2011 5:37 am ]
Post subject:  Re: FS: WT rear lockright
at the current exchange rate you can get them landed for $250 (non coupler versions). or $320 with the couplers
Author:  ajsr [ Thu Feb 03, 2011 5:57 am ]
Post subject:  Re: FS: WT rear lockright
this is in a center , already installed
Author:  mr_ron [ Thu Feb 03, 2011 9:29 am ]
Post subject:  Re: FS: WT rear lockright
I Will Buy this Asap!.. sent you through a text and tried to call but no answer..

Ron 0488122544
Author:  steak_knife [ Thu Feb 03, 2011 9:32 am ]
Post subject:  Re: FS: WT rear lockright
mr_ron wrote:
I Will Buy this Asap!.. sent you through a text and tried to call but no answer..

Ron 0488122544


Best to swap the hemisphere to one of your diff's so you keep the 3.9's.
Author:  mr_ron [ Thu Feb 03, 2011 10:38 am ]
Post subject:  Re: FS: WT rear lockright
Why's that? And by hemisphere do you mean the diff housing?
Author:  Blueberry [ Thu Feb 03, 2011 10:44 am ]
Post subject:  Re: FS: WT rear lockright
I would say crownwheel and pinion, they are what gives you your diff ratio (3.9).

so you would use your crownwheel and pinion with this centre in whatever carier i assume.
Author:  mr_ron [ Thu Feb 03, 2011 11:49 am ]
Post subject:  Re: FS: WT rear lockright
Forgive the ignorance but why can't I use the wt diff ratio?
Author:  Fatzook [ Thu Feb 03, 2011 12:29 pm ]
Post subject:  Re: FS: WT rear lockright
mr_ron wrote:
Forgive the ignorance but why can't I use the wt diff ratio?


Because you have NT diffs. If you used this ratio, you would have to swap your front diff to match it.
Author:  mr_ron [ Thu Feb 03, 2011 9:12 pm ]
Post subject:  Re: FS: WT rear lockright
Ohh ok. Would it be easier to remove the center and put it in my diff? Or is changing the pinion gear and such doable myself?
Author:  birko [ Fri Feb 04, 2011 7:19 am ]
Post subject:  Re: FS: WT rear lockright
Pm'ed you a couple of days ago tanshi
Author:  Fatzook [ Fri Feb 04, 2011 8:59 am ]
Post subject:  Re: FS: WT rear lockright
mr_ron wrote:
? Or is changing the pinion gear and such doable myself?


Requires specific tools to get it right. So if you have to ask, then the answer is no :lol:
Author:  tanshi [ Fri Feb 04, 2011 8:47 pm ]
Post subject:  Re: FS: WT rear lockright
i have a guy comming out this weekend, if it doesnt sell i will look into shipping costs for you guys
Author:  mr_ron [ Sat Feb 05, 2011 5:32 am ]
Post subject:  Re: FS: WT rear lockright
Haha.. yeh good point Pete.. Will pull my diff off the spare Sierra i have and get it installed in that so i can still use the car till its done..

Last question 8) lol... what price should i be expecting.. just ballpark, having never had one tranfered over im unsure as to what its worth and dont want to be taken for a ride...

Thanks muchly fellas.. Ron
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/