hmm round 1k you assemble
maybe dunno hows that sound
| auszookers.com https://auszookers.com/forum/ |
|
| [WA] 1.6 engine/box/webber https://auszookers.com/forum/viewtopic.php?f=7&t=19031 |
Page 1 of 1 |
| Author: | MrRocky [ Fri Feb 11, 2011 9:33 am ] |
| Post subject: | [WA] 1.6 engine/box/webber |
bit premature but in the next few weeks i will be removing my 1.6 engine and placing a 1.3 8v head with higher compression on with 1.3 manifold and new webber with sierra carby hat adapter as well, the g/box has no adapter plate and has had the bellhousing drilled and tapped to suit. There is also a heavy duty clutch with about 6 months use on it. engine blows no smoke, g/box shifts ok but can be a bit stiff sometimes, webber is mounted backwards so it doesnt stall up hills. so if you are after a combo like this ready to drop in and dont mind waiting a few weeks then send us an offer and we can work out a price, it may also be possibe to test drive both the bottom end and top end with the carb setup before they go together, just be realistic with the price bearing in mind the g/box/clutch/webber/craby adapter costs as well as me slapping on a new head gasket, may do it cheaper if you want to put it together yourself. cheers mick |
|
| Author: | Ben_Sierra [ Fri Feb 11, 2011 9:34 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
Any ideas on what sorta price you want Mick? |
|
| Author: | MrRocky [ Fri Feb 11, 2011 9:51 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
hmm round 1k you assemble maybe dunno hows that sound
|
|
| Author: | 96coily [ Fri Feb 11, 2011 10:04 pm ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
Sounds good |
|
| Author: | alien [ Sat Feb 12, 2011 3:00 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
do it kevin! |
|
| Author: | 96coily [ Sat Feb 12, 2011 6:50 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
I think I might ! |
|
| Author: | shandy92 [ Sat Feb 12, 2011 10:04 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
got a mate at work looking for a 1.6, will let him know and get back to you. |
|
| Author: | MrRocky [ Sat Feb 12, 2011 10:18 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
first in best dressed |
|
| Author: | 96coily [ Sun Feb 13, 2011 5:00 am ] |
| Post subject: | Re: [WA] 1.6 engine/box/webber |
Sounds good, I'm back in perth in 10 days I'll come and see ya unless Mitch back doors me |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|