Just wack it back up on ebay. There are than many balenos without motors sitting around, that moving parts will take forever. Put it up cheap and make it someone elses problem
| auszookers.com https://auszookers.com/forum/ |
|
| wrecking baleno https://auszookers.com/forum/viewtopic.php?f=7&t=19365 |
Page 1 of 1 |
| Author: | russty_2008 [ Tue Feb 22, 2011 5:16 am ] |
| Post subject: | wrecking baleno |
hey wrecking a baleno everything apart from the engine loom and computer if u need something shoot me a pm http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT all the panels are straight but the clear is coming off power windows work power mirrors work its got lowered suspension 15" mags tyres about 60 percent an will have the stock 1.3 engine for sale soon not the best condition but still runs fine |
|
| Author: | Fatzook [ Tue Feb 22, 2011 5:26 am ] |
| Post subject: | Re: wrecking baleno |
Just wack it back up on ebay. There are than many balenos without motors sitting around, that moving parts will take forever. Put it up cheap and make it someone elses problem
|
|
| Author: | russty_2008 [ Tue Feb 22, 2011 5:32 am ] |
| Post subject: | Re: wrecking baleno |
Fatzook wrote: Just wack it back up on ebay. There are than many balenos without motors sitting around, that moving parts will take forever. Put it up cheap and make it someone elses problem
ok cheers mate |
|
| Author: | 94BAZOOKA [ Tue Feb 22, 2011 5:49 am ] |
| Post subject: | Re: wrecking baleno |
Pm sent |
|
| Author: | xedent [ Tue Feb 22, 2011 5:50 am ] |
| Post subject: | Re: wrecking baleno |
i hope that it is not a dizzy g16b that you got cause you will need to pull the grinder out if it is.... |
|
| Author: | Fatzook [ Tue Feb 22, 2011 6:14 am ] |
| Post subject: | Re: wrecking baleno |
xedent wrote: i hope that it is not a dizzy g16b that you got cause you will need to pull the grinder out if it is....
And remove the heater core 
|
|
| Author: | russty_2008 [ Tue Feb 22, 2011 7:07 am ] |
| Post subject: | Re: wrecking baleno |
ha ha yes it is the dizzy one but my zook isnt registed so dont really care does anyone know roughly how far past the fire wall the dizzy will sit with a ben t adaptor |
|
| Author: | Fatzook [ Tue Feb 22, 2011 7:11 am ] |
| Post subject: | Re: wrecking baleno |
russty_2008 wrote: ha ha yes it is the dizzy one but my zook isnt registed so dont really care does anyone know roughly how far past the fire wall the dizzy will sit with a ben t adaptor
100-150 mm at a guess. Even then, you will need to remove the motor to get the dizzy cap off 
|
|
| Author: | xedent [ Tue Feb 22, 2011 7:13 am ] |
| Post subject: | Re: wrecking baleno |
well using a thermosat house from a swift i have about 10mm of room, and the dizzy model goes a lot farther then that. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|