Yep. Had a few offers. No cash in my hand though, so its still available
| auszookers.com https://auszookers.com/forum/ |
|
| [QLD] '97 X-90 G16B low kms https://auszookers.com/forum/viewtopic.php?f=7&t=19548 |
Page 1 of 1 |
| Author: | Fatzook [ Sun Feb 27, 2011 12:51 pm ] |
| Post subject: | [QLD] '97 X-90 G16B low kms |
Well since I am putting the J20a in my ute, the G16B is up for grabs. This will not be available for a couple of weeks, but wil be sold as a near complete engine conversion package. Parts that will be supplied are as follows.... X-90 G16B. Had 56000kms when removed from X-90. Has since done 15000 odd floorless kms in my ute. Starter motor (small body) Extractors (surface rust, but they are around 12 months old) Custom air intake pipe with Unifilter Wiring loom, already stripped and labeled. Just needs a quick tidy up. ECU Motor has flywheel, but will require a new clutch. Motor was serviced every 5 or 6000km whilst in my posession. Was drained of oil last week before I knew I was selling, but was due for a service anyway. Things you will need.... Engine mounts BenT kit or vitara 5sp Clutch maybe? ( if yours is boned) Viscous fan (if you shoose to use one) and thats it AFAIK. EFI fuel pump ( I have a NEW! bosch VL external pump that owes me $180. Sell $140) Item is located in Brisbane. I can ship at buyers expense. Asking $1500 obo. PM me for more info. Cheers Peter |
|
| Author: | HDOGG [ Mon Feb 28, 2011 7:19 pm ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
Hi. Do you still the engine ??? |
|
| Author: | Fatzook [ Mon Feb 28, 2011 10:55 pm ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
Yep. Had a few offers. No cash in my hand though, so its still available
|
|
| Author: | HDOGG [ Tue Mar 01, 2011 1:35 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
kool. would it be a straight forward swap into a 94 vitara that was a g16a ??? |
|
| Author: | Fatzook [ Tue Mar 01, 2011 4:26 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
HDOGG wrote: kool. would it be a straight forward swap into a 94 vitara that was a g16a ???
No. The loom has been modified to suit a sierra. |
|
| Author: | Fatzook [ Tue Mar 01, 2011 4:27 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
SOLD pending payment. |
|
| Author: | Crunched [ Tue Mar 01, 2011 4:33 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
Fark that was quick. I was hoping you still had the extractors and EFI pump.. |
|
| Author: | Fatzook [ Tue Mar 01, 2011 4:53 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
Sold with motor sorry. Why do you need one? There is a swimmer pump in that tank I sold you 
|
|
| Author: | Crunched [ Tue Mar 01, 2011 5:20 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
The pump was for something different - an RX7 (not mine, don't tar me with that brush). |
|
| Author: | Fatzook [ Tue Mar 01, 2011 5:25 am ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
Crunched wrote: (not mine, don't tar me with that brush).
I just put the brush down
|
|
| Author: | DarkHorse [ Tue Mar 01, 2011 1:00 pm ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
HDOGG wrote: kool. would it be a straight forward swap into a 94 vitara that was a g16a ???
I'll have one soon if Pete man's up and agrees to 'help' me put the SR20 in mine...
|
|
| Author: | Fatzook [ Tue Mar 01, 2011 2:15 pm ] |
| Post subject: | Re: [QLD] '97 X-90 G16B low kms |
DarkHorse wrote: HDOGG wrote: kool. would it be a straight forward swap into a 94 vitara that was a g16a ??? I'll have one soon if Pete man's up and agrees to 'help' me put the SR20 in mine... Yeah i'm not sure I'd get all the way through the 20kg bag of cement I'd need to achieve the correct level of 'hardenthefuckup' 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|