| auszookers.com https://auszookers.com/forum/ |
|
| [WA] 2 x 4.1 ratio diff centers with lockrites https://auszookers.com/forum/viewtopic.php?f=7&t=19944 |
Page 1 of 1 |
| Author: | MrRocky [ Sat Mar 12, 2011 10:15 am ] |
| Post subject: | [WA] 2 x 4.1 ratio diff centers with lockrites |
going for a 3.7 ratio change and only need a rear spool so my w/t 4.1 diff centers are for sale both with richmond lockrites installed by suzistore, the flanges are maruti flanges so they will need to be re-drilled or changed over for normal w/t flange pattern. they are still in the car so i will need a couple of days notice to pull em out $380 ea firm sorry no swaps/separations/sob stories mick 0437 154 527 |
|
| Author: | bakerboy [ Thu Apr 28, 2011 2:20 pm ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
Still got them? |
|
| Author: | monley [ Sun May 01, 2011 10:55 am ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
Will these fit a jimny? |
|
| Author: | smiffkid [ Sun May 01, 2011 11:59 am ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
rear will |
|
| Author: | bakerboy [ Sun May 01, 2011 12:43 pm ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
Ones no good for ya hahaha don't get them monkey, I want them hahaha |
|
| Author: | monley [ Sun May 01, 2011 12:45 pm ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
Can you have different diff ratios or not will it just fuck up when you go into 4h? |
|
| Author: | smiffkid [ Sun May 01, 2011 12:48 pm ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
will just drive weird for a little while, then the car will feel tight, then u where hear a loud bang noise, there can be 2 results, car stops moving, or keeps driving but with a loud grinding noise, usually indercating something has broken |
|
| Author: | monley [ Sun May 01, 2011 12:49 pm ] |
| Post subject: | Re: [WA] 2 x 4.1 ratio diff centers with lockrites |
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|