auszookers.com
https://auszookers.com/forum/

Parting out Suzuki Vitara SWB 1996 1.6EFI
https://auszookers.com/forum/viewtopic.php?f=7&t=20949
Page 1 of 1

Author:  hegs218 [ Tue Apr 12, 2011 9:45 pm ]
Post subject:  Parting out Suzuki Vitara SWB 1996 1.6EFI

Hey guys had a hit in the front of the Vit
All parts are available except those damaged which are
(Front bar, Right Fender, bonnet and a couple of steering rods which are bent.

Engine : Running in car with 105,000 kms on it no knocks runs smooth in VGC ( selling with or without loom)

Transfer Case/Gearbox : Also in good condition may need to replace the gearbox mount. Selects 4wd Easy no crunches ect.

Softtop: Pritty much a year old with no rips or tears

Susp : I have all the stock suspension parts for the car aswell as a 3.5 inch suspension lift with OME front struts Commo Rear shocks and custom 3.5 inch springs for the front and rear

Exhaust: I have the stock exhaust aswell as a racing exhaust manifold.

Steering box: Will make sure all is working 2night as there was some damage to the rods will post back tonight on condition of ps box.

Also have Front and rear diffs Available. Front is the shitty alloy housing tho.

Have a set of MT 215/85 x5 .. 4 with decent tread on them and one spare in perfect nick will post pics 2night also

If you need anything else possibly from the car just pm me i can have a look to see if its there and we can discuss and price ect from there.

Im also willing to ego most parts interstate at the buyers expense.

Ill have some pics up 2night when i get home.

Located near the Tullarmarine Airport in Melbourne [ VIC ]

Feel free to pm with any questions...

Also willing to let the whole lot go for $3500

so yeah let me know either way :)



just come extra info about the lift few people interested

hey mate,
Ill start with the front end.
Its consists of OME Front struts from lowrange offroad ( never been fitted )
These are pritty much the best struts you can buy for front end of vitara's. Plently of travel and allow for big flex.

Diff drop bracket for the front diff to allow for more articulation and to protect your cv's from those nasty angles.

Front 3.5 inch Lifted springs ( with no front bar will be 3.5 inch with a front bar will drop to around 3 inch. Springs were the best ive used in the front of a vit very good ride for the lift.

Also have spring spacers both 35mm and 15mm for front and back so you can even out any possible extra lift from not having a bar ect.

The rear shocks are commo bought new from supercheap with custom 3.5 inch springs also there is a heim joint space for the tailshaft at the end to allow for more flex and articluation

Im looking for $900 for the whole kit which is pritty good considering you cant get the front struts in Australia for under $450 Springs custom made are at least $500 the diff drop bracket and heim joint spacer are worth $200 each the coil spacers and rear shocks cost around $150 aswell

Ill try and get you a couple of pics of the same lift ( this ones never been in a car brand new ) in my car...

Author:  samb0rg [ Wed Apr 13, 2011 1:48 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

I'm interested in the soft top hardware. Specifically the window brackets that bolt from the door pillar down, along the body, to each rear corner of the car.

Price?

Author:  xedent [ Wed Apr 13, 2011 2:07 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Interested in ps box, let me know

Author:  Nagz [ Wed Apr 13, 2011 4:32 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

how much do you want for the engine and loom?

Author:  GRANDBAZOOKA [ Wed Apr 13, 2011 5:58 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

How much are you after for the manual locking hubs if still available?

Author:  atari4x4 [ Thu Apr 14, 2011 6:05 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

pics?

Author:  FHA57 [ Thu Apr 14, 2011 10:53 pm ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

how much would u want for the speedo so i can get the vss off it and would u post it to mooloolaba 4557 for me?

Author:  hegs218 [ Thu Apr 14, 2011 11:56 pm ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

hey guys sorry ive been a bit slack 2night ill have pics up 2morow.
Also will have postage and prices for everyone that has pm'ed
Will also update the add.
Cheers

Author:  Microwire [ Fri Apr 15, 2011 3:10 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

PM Sent - Soft Top

Author:  Polar_Bear [ Fri Apr 15, 2011 5:20 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Man or auto?

Author:  christover1 [ Fri Apr 15, 2011 8:51 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

I'd be interested in the front diff drop brackets,
if they don't sell with the rest of the lift kit.

christover

Author:  Chapster [ Fri Apr 15, 2011 10:22 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Hey dude how much for the fuel tank?

Author:  samb0rg [ Sat Apr 16, 2011 6:26 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Still waiting on a reply to PM's :)

Author:  FHA57 [ Sun Apr 17, 2011 3:27 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

yeah same

Author:  swifty_ano [ Sun Apr 17, 2011 7:36 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Starter motor?

Postage to 4510 Qld?

Author:  Chapster [ Mon Apr 18, 2011 5:51 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

No luck here :( I hope he repiles to all

Author:  zammit [ Mon Apr 18, 2011 8:04 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

pm sent

Author:  atari4x4 [ Mon Apr 18, 2011 8:12 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

hegs218 wrote:
Hey guys had a hit in the front of the Vit
All parts are available except those damaged which are
(Front bar, Right Fender, bonnet and a couple of steering rods which are bent.

Engine : Running in car with 105,000 kms on it no knocks runs smooth in VGC ( selling with or without loom)

Transfer Case/Gearbox : Also in good condition may need to replace the gearbox mount. Selects 4wd Easy no crunches ect.

Softtop: Pritty much a year old with no rips or tears

Susp : I have all the stock suspension parts for the car aswell as a 3.5 inch suspension lift with OME front struts Commo Rear shocks and custom 3.5 inch springs for the front and rear

Exhaust: I have the stock exhaust aswell as a racing exhaust manifold.

Steering box: Will make sure all is working 2night as there was some damage to the rods will post back tonight on condition of ps box.

Also have Front and rear diffs Available. Front is the shitty alloy housing tho.

Have a set of MT 215/85 x5 .. 4 with decent tread on them and one spare in perfect nick will post pics 2night also

If you need anything else possibly from the car just pm me i can have a look to see if its there and we can discuss and price ect from there.

Im also willing to ego most parts interstate at the buyers expense.

Ill have some pics up 2night when i get home.

Located near the Tullarmarine Airport in Melbourne [ VIC ]

Feel free to pm with any questions...

Also willing to let the whole lot go for $3500

so yeah let me know either way :)



just come extra info about the lift few people interested

hey mate,
Ill start with the front end.
Its consists of OME Front struts from lowrange offroad ( never been fitted )
These are pritty much the best struts you can buy for front end of vitara's. Plently of travel and allow for big flex.

Diff drop bracket for the front diff to allow for more articulation and to protect your cv's from those nasty angles.

Front 3.5 inch Lifted springs ( with no front bar will be 3.5 inch with a front bar will drop to around 3 inch. Springs were the best ive used in the front of a vit very good ride for the lift.

Also have spring spacers both 35mm and 15mm for front and back so you can even out any possible extra lift from not having a bar ect.

The rear shocks are commo bought new from supercheap with custom 3.5 inch springs also there is a heim joint space for the tailshaft at the end to allow for more flex and articluation

Im looking for $900 for the whole kit which is pritty good considering you cant get the front struts in Australia for under $450 Springs custom made are at least $500 the diff drop bracket and heim joint spacer are worth $200 each the coil spacers and rear shocks cost around $150 aswell

Ill try and get you a couple of pics of the same lift ( this ones never been in a car brand new ) in my car...


Can I have pics of the tailshaft heim joint spacer that increases articulation & I'm pretty sure you can buy the struts from ARB for $200 each

Author:  vl2dy4 [ Mon Apr 18, 2011 3:47 pm ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

Mate i'm chasing a vitara engine fan and viscous coupling do you have one for sale?

Author:  SSSIERA [ Wed Apr 20, 2011 7:59 am ]
Post subject:  Re: Parting out Suzuki Vitara SWB 1996 1.6EFI

how much u want for the fuel tank posted to 6054

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/