auszookers.com • View topic - SJ/LJ front diff and suspension bits (Some freebies)

Board index » Shift It And Find It » Getting rid of stuff

SJ/LJ front diff and suspension bits (Some freebies)

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Sun May 08, 2011 7:24 am

LJ

I have a good LJ50 front housing, with a pair of good shafts and stock CV's. Assorted swivel hubs and brake drums also.
$50ono the lot.
(anyone after extra spare LJ swivels or drums I probably have some).

Assorted standard LJ50/80 front springs and U-bolts. Let me know what you want, if I have it spare, its free.
______________________________________________________

Sierra

SJ70 Widetrack Sierra front housing. The car this came off was jumped...... so the housing is slightly bent. Anyone willing to take it and straighten it can have it for free.

SJ70 Widetrack front longside shaft. CV is dead, but the shaft could happily receive a donor CV from a NT axle or a new CV.
Free.

I may have some other widetrack front end bits laying around. Ask and I will let you know.

_______________________________________________________

All items pickup only from near Ipswich QLD, unless you can make it worth my while to send it to you :wink:

_________________
Clearance Hole Technology

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Sun May 08, 2011 9:22 am

Highway-Star wrote:

I will grab that WT shaft please.

You don't have any rear driveshafts do you? :oops:

_________________
SJ50.4.LYF

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Sun May 08, 2011 9:33 am

Damo wrote:

I will grab that WT shaft please.

You don't have any rear driveshafts do you? :oops:

All yours. Let me know when you want to grab it.

:lol:

I think I do.... but from memory its the original one from my Sierra which has allot of play in the spline. I'll check tomorrow arvo and let you know.

_________________
Clearance Hole Technology

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Sun May 08, 2011 9:40 am

Highway-Star wrote:

I think I do.... but from memory its the original one from my Sierra which has allot of play in the spline. I'll check tomorrow arvo and let you know.

Mine has "a bit" of play in one of the u-joints :lol:

_________________
SJ50.4.LYF

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Sun May 08, 2011 9:50 am

Damo wrote:

Highway-Star wrote:

I think I do.... but from memory its the original one from my Sierra which has allot of play in the spline. I'll check tomorrow arvo and let you know.

Mine has "a bit" of play in one of the u-joints :lol:

That picture may have to make an appearance sooner or later! :lol:

_________________
Clearance Hole Technology

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Mon May 16, 2011 8:44 am

Bump...

_________________
Clearance Hole Technology

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Mon May 16, 2011 10:34 pm

I need a pair of lg50 front drums and a front and rear transfer case to diff drive shafts - front knuckle bits would be good to.

Cheers - Tony

_________________
Old farts sometimes know some stuff you don't.

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Tue May 17, 2011 4:25 am

tonyevans wrote:

I need a pair of lg50 front drums and a front and rear transfer case to diff drive shafts - front knuckle bits would be good to.

Cheers - Tony

Can't be sure about all the tailshafts, but should have most of those things.
I'll send you a PM.

_________________
Clearance Hole Technology

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Tue May 17, 2011 4:38 am

i may have tail shafts aaron, mine are all non standard so i dont really need them

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Tue May 17, 2011 4:45 am

tanshi wrote:

i may have tail shafts aaron, mine are all non standard so i dont really need them

OK cool.
I know I'll have a jackshaft and front shaft. I highly doubt a rear one though (and no offence but no ones getting my 1 spare stockman rear!

)

_________________
Clearance Hole Technology

Teracis

Joined: Sat Dec 11, 2010 10:03 pm
Posts: 2261
Location: Gold Coast
Vehicle: Daisy

Posted: Tue May 17, 2011 9:52 am

I was just about to ask if you have a front driveshaft for a WT sj70, I have issues with mine!

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Tue May 17, 2011 9:57 am

Teracis wrote:

I was just about to ask if you have a front driveshaft for a WT sj70, I have issues with mine!

I have a busted one

Sorry, but that's all I have in the way of Sierra tailshafts.

_________________
Clearance Hole Technology

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Tue May 17, 2011 9:59 am

i have a sierra one if John ever gives it back to me!!!

Last edited by tanshi on Tue May 17, 2011 10:00 am, edited 1 time in total.

Teracis

Joined: Sat Dec 11, 2010 10:03 pm
Posts: 2261
Location: Gold Coast
Vehicle: Daisy

Posted: Tue May 17, 2011 9:59 am

All good, thanks anyways

Page 1 of 1

[ 14 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum