[chris_mac]

due to my commitments i need to get rid of few things. i've got few bits and pieces from my sierra, they all end up in the bin unless someone wants it and will come and PICK IT UP. i'm not posting anything.

if someone decide to give me a beer i won't refuse , but everything is for FREE. all of it will end up in a wheely bin if no one will claim it.


rear bumper without plastic parts on both sides + all brackets for it
remains/part of front alloy bullbar,
plastic sill covers
plastic bits which go next to the doors on a pillar - GONE
rubber cover for gear or t-case stick (not genuine suzuki)
tie hook (bolts on chassis at the back)
2 car kenwood speakers - GONE
bits of air intake, aluminium pipe and rubber bends (those before air box)
spare wheel carrier which bolts on tailgate
a plastic shelf - bolts on passenger side below dashboard - GONE
vitara 1.6 carby crank single pulley
rug joint
4 tjm xgs shocks - all have dents in casing but pistons are straight and shocks work ok







I FORGOT TO MENTION that i have a sierra uni air filter + K&N oil in spray can, i used for a while, reoiled once and don't wand it any more. i can't be bother with cleaning filter and reoiling it.

[lump_a_charcoal]

Hey Shep, look - a rag joint!

[BlueSuzy]

lump_a_charcoal wrote:

Hey Shep, look - a rug joint!

[Vash]

I know its free and i shouldnt be complaining but would those shocks be suitable for my wobbling suzi?:)

[weaves]

They certainly wouldn't hurt it Vash, especially if yours are shagged.

really its only your time you would be wasting if it hasn't fixed it.

If i was closer i would swing past and grab them thats for sure.

[Vash]

cheers mate

chrismac where in sydney are you? might grab the front shocks since mine are stuffed.

[ZookFan]

Shame your not in brissy! , I would be there in a flash!

[chris_mac]

Vash wrote:

cheers mate

chrismac where in sydney are you? might grab the front shocks since mine are stuffed.

i'm in Haberfield

pm sent

[crewsy]

Could you please post the nicer plastic A pillar piece in an envelope to me and I can pay for the postage costs?

[chris_mac]

crewsy wrote:

Could you please post the nicer plastic A pillar piece in an envelope to me and I can pay for the postage costs?

well mate, how about it:
send me a letter with a proper envelope inside it with enough stamps and your address on it. than i don't have to worry about going to post office and stand in the queue, will just put it into the mailbox on my way to work

[crewsy]

chris_mac wrote:

crewsy wrote:

Could you please post the nicer plastic A pillar piece in an envelope to me and I can pay for the postage costs?

well mate, how about it:
send me a letter with a proper envelope inside it with enough stamps and your address on it. than i don't have to worry about going to post office and stand in the queue, will just put it into the mailbox on my way to work

Oh good idea haha, didn't think of that. I'll send you a PM now, thanks!

[DomGat]

Spare wheel carrier not still available by any chance?