auszookers.com
https://auszookers.com/forum/

33" extremes, 15x8 -28 rims.
https://auszookers.com/forum/viewtopic.php?f=7&t=22492		 Page 1 of 2
Author:  boostedbrick [ Fri Jun 03, 2011 7:08 am ]
Post subject:  33" extremes, 15x8 -28 rims.
Rims and tyres left. Need them gone.


4x Silverstone extremes. On 15x8 -28 rims(5 rims). Approx 70 - 80% tread, One tyre has been in a fight with a guard and the outside lugs have been damaged. See picture. $800
I am willing to seperate tyres and rims for the right price. But either way $800 is a good figure for them together.



Pretty much everything else that was for sale has gone now...

Build thread
http://www.auszookers.com/index.php?nam ... &start=210

Image
Image
Image
Image
Image

SOLD
6.5s, brand new fitted to case. All new bearings. Hasent even had oil in it yet. $800.

Roctoy ring, new. $50

Front diff set up. Spartan locker, chromos, near new wheeling bearings, swivel hubs rebuilt under 1500ks ago. disc to disc, with hubs. No calipers. $550

Front calipers. Work well. $50

Rear diff set up. Drum to Drum. New wheel bearings, new carrier bearings, shoes around 2500kays old. Bad pinion seal, ill give you a new one with it. $250

Mu canvas bikini top. $80
Mu canvas rear wind deflector. clear window. $60
Mu canvas tonneau cover $80

Exo cage, rear bar, sliders. Rear bar to suit 2inch body lift. Sliders will require mounts made. Has taillights and two reverse spottys. Comes with LR flares to suit cage, with upto a 2inch virtual lift. $900

Alloy 4 point pretty bar.(its alloy and not heavy, so im not sure how strong it is, but looks nice). $50
Author:  steak_knife [ Fri Jun 03, 2011 7:13 am ]
Post subject:  Re: Lot of sierra bits
8O :cry:
Author:  jonno_racing [ Fri Jun 03, 2011 7:14 am ]
Post subject:  Re: Lot of sierra bits
hey mate pretty keen on your exo would u sell without rear bar? if so what price?
Author:  steak_knife [ Fri Jun 03, 2011 7:15 am ]
Post subject:  Re: Lot of sierra bits
jonno_racing wrote:
hey mate pretty keen on your exo would u sell without rear bar? if so what price?


:crazy: rear bar's part of it.....
Author:  boostedbrick [ Fri Jun 03, 2011 7:15 am ]
Post subject:  Re: Lot of sierra bits
steak_knife wrote:
8O :cry:


Been realistic about my finances here. Sure as f#$k don't want to.
Author:  =wardy= [ Fri Jun 03, 2011 7:18 am ]
Post subject:  Re: Lot of sierra bits
pm sent
Author:  jonno_racing [ Fri Jun 03, 2011 7:21 am ]
Post subject:  Re: Lot of sierra bits
steak_knife wrote:
jonno_racing wrote:
hey mate pretty keen on your exo would u sell without rear bar? if so what price?


:crazy: rear bar's part of it.....


i am 100% sure i can put some mounts on2 my rear bar and its a good looking bar, should sell well!

pm sent.
Author:  steak_knife [ Fri Jun 03, 2011 7:24 am ]
Post subject:  Re: Lot of sierra bits
boostedbrick wrote:
steak_knife wrote:
8O :cry:


Been realistic about my finances here. Sure as f#$k don't want to.



Sell your body instead!!!! :lol:
Author:  SierraDan [ Fri Jun 03, 2011 7:26 am ]
Post subject:  Re: Lot of sierra bits
whattttttt......................... 8O
Author:  Ridge [ Fri Jun 03, 2011 7:27 am ]
Post subject:  Re: Lot of sierra bits
its a shame you have to part this out, i told a friend about this and he should be keen on a few things.
Author:  Highway-Star [ Fri Jun 03, 2011 7:28 am ]
Post subject:  Re: Lot of sierra bits
8O 8O 8O :cry:



I'll take the roctoy ring mate. Sending you a PM.
Author:  Junior_91 [ Fri Jun 03, 2011 8:15 am ]
Post subject:  Re: Lot of sierra bits
Flairs for sale mate?
Author:  boostedbrick [ Fri Jun 03, 2011 8:21 am ]
Post subject:  Re: Lot of sierra bits
Flares are going with the exo sorry.
Author:  remydog05 [ Fri Jun 03, 2011 9:06 am ]
Post subject:  Re: Lot of sierra bits
Bugger mate

Hope you have another one asap.

Cheers
Author:  remydog05 [ Fri Jun 03, 2011 9:10 am ]
Post subject:  Re: Lot of sierra bits
Id prob be keen on your ARB bar if no one wants it in Bris, let me know if your getting keen to see it go.
Author:  boostedbrick [ Fri Jun 03, 2011 9:33 am ]
Post subject:  Re: Lot of sierra bits
No problem dude, i may end up keeping it. Ill see what else sells first.
Author:  turbo_deo [ Fri Jun 03, 2011 9:59 am ]
Post subject:  Re: Lot of sierra bits
Pm sent
Author:  boostedbrick [ Fri Jun 03, 2011 10:09 am ]
Post subject:  Re: Lot of sierra bits
Got a few people keen on the canvas bits, JRed has first dibs, if that falls through ill let you know.
Author:  oozuk [ Fri Jun 03, 2011 10:09 am ]
Post subject:  Re: Lot of sierra bits
Got any better pics of your seats, couldn't find bugger all in your build thread.
Author:  boostedbrick [ Fri Jun 03, 2011 10:21 am ]
Post subject:  Re: Lot of sierra bits
Ill get some now.
Author:  boostedbrick [ Fri Jun 03, 2011 10:25 am ]
Post subject:  Re: Lot of sierra bits
Passenger side bolster has a tiny hole. otherwise is fine. Could do with a vacuum.

Image
Image
Author:  jonno_racing [ Fri Jun 03, 2011 10:30 am ]
Post subject:  Re: Lot of sierra bits
same as mine. dam they are cumfy!
Author:  Teracis [ Fri Jun 03, 2011 11:30 am ]
Post subject:  Re: Lot of sierra bits
Hey man, shame to see you have to part it out.

If you still are though, what condition are the front and rear drive shafts in and how much are you chasing for them?

EDIT: And the windscreen "horns" for resting it on when it's folded down, for some reason mine has none :(
Author:  boostedbrick [ Fri Jun 03, 2011 11:03 pm ]
Post subject:  Re: Lot of sierra bits
Teracis wrote:
Hey man, shame to see you have to part it out.

If you still are though, what condition are the front and rear drive shafts in and how much are you chasing for them?

EDIT: And the windscreen "horns" for resting it on when it's folded down, for some reason mine has none :(


Pm sent mate... exo is available again.
Author:  Junior_91 [ Sat Jun 04, 2011 7:41 am ]
Post subject:  Re: Lot of sierra bits
How mush for hte spotties if your selling them.
Author:  boostedbrick [ Sat Jun 04, 2011 7:49 am ]
Post subject:  Re: Lot of sierra bits
Keeping them for the next rig mate.
Author:  Mattmorgo [ Sun Jun 05, 2011 6:57 am ]
Post subject:  Re: Lot of sierra bits
What are you doing with engine and driveline?
Author:  remydog05 [ Sun Jun 05, 2011 6:58 am ]
Post subject:  Re: Lot of sierra bits
:helloo:
The very first line!
"Parting my sierra out, about all im keeping is the engine[i][b]. "
Author:  boostedbrick [ Sun Jun 05, 2011 7:03 am ]
Post subject:  Re: EXO cage, 33" extremes and bits left
^^ Pretty much.. engine, box, lume. Nothing else left of the drivetrain.
Author:  Mattmorgo [ Sun Jun 05, 2011 7:14 am ]
Post subject:  Re: Lot of sierra bits
remydog05 wrote:
:helloo:
The very first line!
"Parting my sierra out, about all im keeping is the engine[i][b]. "


:oops: :crazy: I read through that description twice and couldnt find it.


Pm sent boostedbrick
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/