| auszookers.com https://auszookers.com/forum/ |
|
| QLD Sierra Bits Ute bits NEW BITS AND PICS https://auszookers.com/forum/viewtopic.php?f=7&t=22840 |
Page 1 of 2 |
| Author: | Verm1n [ Tue Jun 14, 2011 5:33 am ] |
| Post subject: | QLD Sierra Bits Ute bits NEW BITS AND PICS |
2 doors.. 1 door has a broken piece of glass another door will supplied for donor glass $150 Redbank plains can deliver locally MORE PARTS TO BE UPLOADED |
|
| Author: | Verm1n [ Tue Jun 14, 2011 5:47 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Sierra 1ltr Ute cab inc glass, seat belts steering wheel, the support bar and floor mats The cab itself has Hail damage in the roof and a dint on the side 3 skittle sized rust holes.. 2 on the back of the cab and 1 on the floor $350 will deliver locally |
|
| Author: | Verm1n [ Tue Jun 14, 2011 5:53 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
sierra front clip.. someone wanted, hasn't paid for it but sick of it sitting there WT flare brackets, modified to suit winch, hole cut for snorkel Headlights no inc want it gone $50 |
|
| Author: | Verm1n [ Tue Jun 14, 2011 6:01 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
2inch extended shackles $40 |
|
| Author: | Verm1n [ Tue Jun 14, 2011 6:40 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
front bar lights included $200 |
|
| Author: | Verm1n [ Tue Jun 14, 2011 6:50 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
front 1ltr Diff inc steering arms and calipers $50 |
|
| Author: | Verm1n [ Tue Jun 14, 2011 6:56 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
pair of side steps suit 2inch body lift $200 |
|
| Author: | sogone [ Tue Jun 14, 2011 7:25 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Wouldn't happen to have NT diffs front and rear left over would ya? |
|
| Author: | Verm1n [ Tue Jun 14, 2011 7:43 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
I have a pair of 1ltr NT 'front and rear' -have another 1ltr front on hold til the weekend -front clip is sold pending payment |
|
| Author: | sogone [ Tue Jun 14, 2011 8:24 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Would I have trouble putting these into a 1.3 NT? Just need it for rego? Has it got brakes mate? Centre's and the such? |
|
| Author: | Blueberry [ Wed Jun 15, 2011 12:54 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
strange question but how heavy is the ute cab? possible to lift with a few guys? cheers sam. |
|
| Author: | tanshi [ Wed Jun 15, 2011 12:59 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
you should be able to lift it with two and move it around with 2-3 |
|
| Author: | Verm1n [ Wed Jun 15, 2011 3:54 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
SOGONE they would prob fit but wouldn't reccomending wasting time.. by the time u got them then put the diffs in new oil blah blah.. I could almost bet there would be a pair of 1.3diffs come up BLUEBERRY 2 ppl can lift it.. mind u I manage to get it from where it mounts to where the tray sat by myself  baha..
TANSHI damn straight  2 lifted it from where the tray mounts down onto a few milkcrates
|
|
| Author: | hypactiv1 [ Wed Jun 15, 2011 4:15 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
keen on shakles send to perth?? |
|
| Author: | Verm1n [ Thu Jun 16, 2011 8:38 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
FRONT CLIP IS GONE |
|
| Author: | Verm1n [ Thu Jun 16, 2011 8:39 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
hypactiv1 wrote: keen on shakles send to perth??
would prefer pick up but will let u know this weekend |
|
| Author: | Verm1n [ Thu Jun 16, 2011 10:51 pm ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Cab and 2 front diffs on hold til sat.. |
|
| Author: | Verm1n [ Sun Jun 19, 2011 10:16 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
CAB IS SOLD AND GONE CHASSIS IS SOLD AND GONE SLIDDERS ARE GONE 1 FRONT DIFF IS GONE |
|
| Author: | Hotshot993 [ Mon Jun 20, 2011 5:23 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Damn only saw this. Wanted the front clip:( |
|
| Author: | ozsteve [ Mon Jun 20, 2011 9:17 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
love the checker plate door trims wish you where on sunny coast |
|
| Author: | Verm1n [ Mon Jun 20, 2011 8:43 pm ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
Hotshot993 wrote: Damn only saw this. Wanted the front clip:( went pretty quick actually ozsteve wrote: love the checker plate door trims wish you where on sunny coast
they look cool.. but they hurt when u knee hits them ;P |
|
| Author: | supa_slim [ Tue Jun 21, 2011 12:59 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
The doors for sale still |
|
| Author: | Verm1n [ Tue Jun 21, 2011 5:01 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
yea mate.. |
|
| Author: | supa_slim [ Tue Jun 21, 2011 9:33 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
very interested in them upload some more pics of them if u can cheers |
|
| Author: | Verm1n [ Wed Jun 22, 2011 1:43 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
more pics of the doors |
|
| Author: | Verm1n [ Wed Jun 22, 2011 1:44 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
pic of donor door for glass |
|
| Author: | Verm1n [ Wed Jun 22, 2011 1:49 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
FREE bonnet pretty crappy cut piece of brace out to suit 1.6efi hail damage and dint |
|
| Author: | Verm1n [ Wed Jun 22, 2011 2:00 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
rear 1ltr NT diff 'inc tailshaft' Springs and shackles not included $50 |
|
| Author: | Verm1n [ Wed Jun 22, 2011 2:02 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits |
set of stocko rims and tyres.. 5 rims and tyres $100 I also know the pic only shows 4 but I do have the 5th somewhere.. |
|
| Author: | Verm1n [ Wed Jun 22, 2011 2:07 am ] |
| Post subject: | Re: QLD Sierra Bits Ute bits NEW BITS AND PICS |
TAKE the front and rear 1ltr Diffs for $80 Bullbar NOW $150 just want the stuff gone so I can try and grow and mow my grass |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|