too easy mate.. Hows the old zook going.. still havent seen Grahams ute yet
will get round to it oneday though
| auszookers.com https://auszookers.com/forum/ |
|
| CARBY https://auszookers.com/forum/viewtopic.php?f=7&t=25860 |
Page 1 of 1 |
| Author: | buddah_04 [ Sat Sep 17, 2011 12:07 am ] |
| Post subject: | CARBY |
got a weber here, been sitting for a little while so may need a kit through it. have air cleaner, adaptor plate and bolts here for it. also have a T piece for the return line, so pretty much complete kit. chasing around NOW $200 ONO 0424071279 |
|
| Author: | 607CHA [ Sat Sep 17, 2011 2:55 am ] |
| Post subject: | Re: CARBY |
Will it work on a g16a |
|
| Author: | buddah_04 [ Sat Sep 17, 2011 3:12 am ] |
| Post subject: | Re: CARBY |
607CHA wrote: Will it work on a g16a
yeah mate, the adaptor plate and thats the same |
|
| Author: | 607CHA [ Sat Sep 17, 2011 3:24 am ] |
| Post subject: | Re: CARBY |
Did you have any problems with it on hills |
|
| Author: | buddah_04 [ Sat Sep 17, 2011 3:26 am ] |
| Post subject: | Re: CARBY |
607CHA wrote: Did you have any problems with it on hills
never really put it on hills big enough, but there is a different needle u can put in it instead of the brass one, plus if u put the fuel bowl to the fire wall, it will stall down hills not up |
|
| Author: | 2stroker [ Sat Sep 17, 2011 3:36 am ] |
| Post subject: | Re: CARBY |
Or if you set it up properly it wont stall at all....apparently |
|
| Author: | mrgtt34 [ Sat Sep 17, 2011 8:32 am ] |
| Post subject: | Re: CARBY |
or EFI all the way> at least the weber will idle |
|
| Author: | buddah_04 [ Sat Sep 17, 2011 8:39 am ] |
| Post subject: | Re: CARBY |
mrgtt34 wrote: or EFI all the way> at least the weber will idle
hahahaha, not all of us have twin cams in just yet |
|
| Author: | Verm1n [ Sat Sep 17, 2011 8:44 am ] |
| Post subject: | Re: CARBY |
got any pics mate.. wat sort of weber is it?? 32/36 34/34 |
|
| Author: | buddah_04 [ Sat Sep 17, 2011 8:46 am ] |
| Post subject: | Re: CARBY |
Verm1n wrote: got any pics mate.. wat sort of weber is it?? 32/36 34/34
brad its a 32/36, no pics of it though, its the italy built ont the cheap redline immatation |
|
| Author: | Verm1n [ Sat Sep 17, 2011 8:48 am ] |
| Post subject: | Re: CARBY |
too easy mate.. Hows the old zook going.. still havent seen Grahams ute yet will get round to it oneday though
|
|
| Author: | buddah_04 [ Sat Sep 17, 2011 8:53 am ] |
| Post subject: | Re: CARBY |
Verm1n wrote: too easy mate.. Hows the old zook going.. still havent seen Grahams ute yet
will get round to it oneday thoughhahaha, yeah, that things un stopable pretty much, went to ripley today and shit. should pop in tomorow mate. did u want that carby? |
|
| Author: | Farkkoss [ Sat Sep 17, 2011 9:49 am ] |
| Post subject: | Re: CARBY |
nah i have a webber and he's looking for a filter for mine |
|
| Author: | buddah_04 [ Mon Sep 19, 2011 11:27 am ] |
| Post subject: | Re: CARBY |
need this gone before i move to toowoomba |
|
| Author: | buddah_04 [ Mon Sep 26, 2011 8:23 am ] |
| Post subject: | Re: CARBY |
bump |
|
| Author: | bluzooker89 [ Tue Sep 27, 2011 6:21 am ] |
| Post subject: | Re: CARBY |
Will u post it to Perth 6054 |
|
| Author: | buddah_04 [ Tue Sep 27, 2011 6:26 am ] |
| Post subject: | Re: CARBY |
bluzooker89 wrote: Will u post it to Perth 6054
still goto get a quote for another bloke on here, cant really duck up to the post office where i am now |
|
| Author: | bluzooker89 [ Tue Sep 27, 2011 7:26 am ] |
| Post subject: | Re: CARBY |
Ok no worries mate |
|
| Author: | buddah_04 [ Wed Oct 19, 2011 6:15 am ] |
| Post subject: | Re: CARBY |
BUMP SHOULD BE GETTING PRICES IN ABOUT A WEEK OR SO FOR POSTAGE, BIT HARD ATM.. |
|
| Author: | stockman [ Wed Oct 19, 2011 7:12 am ] |
| Post subject: | Re: CARBY |
Use the Australian Post website. |
|
| Author: | SierraDan [ Wed Oct 19, 2011 7:15 am ] |
| Post subject: | Re: CARBY |
2stroker wrote: Or if you set it up properly it wont stall at all....apparently
My zook still runs at like 60-70degrees, idles a bit dodgy but still drives under throttle fine. |
|
| Author: | Rusho [ Wed Oct 19, 2011 8:07 am ] |
| Post subject: | Re: CARBY |
stockman wrote: Use the Australian Post website.
....or e-go couriers 
|
|
| Author: | stockman [ Wed Oct 19, 2011 8:12 am ] |
| Post subject: | Re: CARBY |
Rusho wrote: stockman wrote: Use the Australian Post website. ....or e-go couriers 
|
|
| Author: | buddah_04 [ Wed Oct 19, 2011 10:20 pm ] |
| Post subject: | Re: CARBY |
bluzooker89 wrote: Will u post it to Perth 6054
by the aus post website, it will be about $32-35 from here to perth |
|
| Author: | buddah_04 [ Tue Nov 29, 2011 3:59 am ] |
| Post subject: | Re: CARBY |
BUMP, $200 ONO |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|