It is currently Sat Jul 18, 2026 12:08 am
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 22 posts ] 
Author Message

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Sun Sep 18, 2011 3:46 am 
Reply with quote Top  
just a few parts to sell,

1ltr motor out of an 87 sierra has had full valve regrind and pressure check aswell as rings and bearings, only done about 1000k's since then. aswell as timing belt etc etc. still has engine mounts and carby water pump, starter motor and 4 speed gearbox fitted. owes me a bit but make a reasonable offer and ill get back to you..

i also have a 1ltr transfer case the early one without the 4x4 light. not sure on its internal condition.

front and rear axles with diff centre still in them, the drum brake front end.

i have a full exhaust for a 1ltr with extractors.

front tintop windsreen, rear side windows and rear door with window, i think its an 82 model not sure but.

hopefully i can get rid of some of this stuff, cheeerrrssss. :helloo:

_________________
when boredom sets in ....

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Post Posted: Sun Sep 18, 2011 4:02 am 
Reply with quote Top  
Where?

_________________
Old farts sometimes know some stuff you don't.

 Profile WWW  

Offline

Joined: Sun Jul 11, 2010 12:03 am
Posts: 574
Location: Burwood, Victoria
Vehicle: yellow 83 sierra

Post Posted: Sun Sep 18, 2011 4:27 am 
Reply with quote Top  
interested in the exhaust system and transfer case how much where abouts are you?

 Profile  

Offline
User avatar

Joined: Mon May 30, 2011 7:43 am
Posts: 241
Location: narromine

Post Posted: Sun Sep 18, 2011 6:00 am 
Reply with quote Top  
pm sent

 Profile  

Offline
User avatar

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Post Posted: Sun Sep 18, 2011 6:17 am 
Reply with quote Top  
Yeah everyone apparently this stuff is free but it is at Alice Springs.






If you don't want us to make stuff up then give us some information.

 Profile  

Offline
User avatar

Joined: Mon May 30, 2011 7:43 am
Posts: 241
Location: narromine

Post Posted: Sun Sep 18, 2011 8:47 am 
Reply with quote Top  
2stroker wrote:
Yeah everyone apparently this stuff is free but it is at Alice Springs.






If you don't want us to make stuff up then give us some information.

gee I only wanted a diff but if hes in alice springs id have to buy the motor and swap it over just to get home 8O :lol:

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Post Posted: Mon Sep 19, 2011 9:25 am 
Reply with quote Top  
2stroker wrote:
Yeah everyone apparently this stuff is free but it is at Alice Springs.


On the North side of town, or the South side? I don't want to travel too far.

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Mon Sep 19, 2011 9:42 am 
Reply with quote Top  
haha. sorry fella's, im new to this shit and i rushed it abit. umm im on the northside at burpengary. ill do up some rough prices in a minute but yeah just hit me with an offer if use are interested. cheers

_________________
when boredom sets in ....

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Mon Sep 19, 2011 9:54 am 
Reply with quote Top  
1ltr motor out of an 87 sierra has had full valve regrind and pressure check aswell as rings and bearings, only done about 1000k's since then. aswell as timing belt etc etc. still has engine mounts and carby water pump, starter motor and 4 speed gearbox fitted. owes me a bit but make a reasonable offer and ill get back to you.. in a perfect world i'd like$400- $500 but im open to offers.

i also have a 1ltr transfer case the early one without the 4x4 light. not sure on its internal condition. $20 or if u buy something else i might give it to ya.

front and rear axles with diff centre still in them, the drum brake front end.
$50 ea

i have a full exhaust for a 1ltr with extractors.
$50

front tintop windsreen, rear side windows and rear door with window, i think its an 82 model not sure but.
$20ea

also i have a towbar and stuff $20 or something im happy with.

a few other parts to if ur chasing something i havent listed just ask me. its also fitted with retractable belts and i think corolla seats.

_________________
when boredom sets in ....

 Profile  

Offline
User avatar

Joined: Wed Mar 18, 2009 10:30 pm
Posts: 54
Location: Devonport, TAS

Post Posted: Mon Sep 19, 2011 9:02 pm 
Reply with quote Top  
are you willing to post the rear side windows at my expense?

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Mon Sep 19, 2011 9:08 pm 
Reply with quote Top  
clem430 wrote:
are you willing to post the rear side windows at my expense?


how would i go about posting them mate?? :blink:

_________________
when boredom sets in ....

 Profile  

Offline
User avatar

Joined: Wed Mar 18, 2009 10:30 pm
Posts: 54
Location: Devonport, TAS

Post Posted: Mon Sep 19, 2011 9:31 pm 
Reply with quote Top  
juzzys wrote:
clem430 wrote:
are you willing to post the rear side windows at my expense?


how would i go about posting them mate?? :blink:


yeah good point, didn't really think about it haha but in small pieces would be the go and then I could glue them all back together?

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Mon Sep 19, 2011 9:51 pm 
Reply with quote Top  
haha. good idea!! il get the sledge hammer out now.

_________________
when boredom sets in ....

 Profile  

Offline
az supporter
az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Post Posted: Mon Sep 19, 2011 11:37 pm 
Reply with quote Top  
i have a mate that will be interested in front and rear diffs and towbar.

Do you have a contact number he can call you on.

 Profile  

Offline

Joined: Sun Jul 11, 2010 12:03 am
Posts: 574
Location: Burwood, Victoria
Vehicle: yellow 83 sierra

Post Posted: Tue Sep 20, 2011 1:29 am 
Reply with quote Top  
PM sent

 Profile  

Offline

Joined: Mon Nov 01, 2010 9:47 am
Posts: 286
Location: South East Brisbane
Vehicle: 02 GV SQ625 + 84 Sierra SJ410

Post Posted: Tue Sep 20, 2011 1:48 am 
Reply with quote Top  
please check your pm

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Tue Sep 20, 2011 8:54 pm 
Reply with quote Top  
im hoping to have sold the axles and towbar but all the rest still stands,

_________________
when boredom sets in ....

 Profile  

Offline

Joined: Sun Jul 11, 2010 12:03 am
Posts: 574
Location: Burwood, Victoria
Vehicle: yellow 83 sierra

Post Posted: Tue Sep 20, 2011 11:20 pm 
Reply with quote Top  
i would buy the exhaust and transfer case if you can send them

 Profile  

Offline
User avatar

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 152
Location: tasmania

Post Posted: Tue Sep 20, 2011 11:54 pm 
Reply with quote Top  
id take the engine if you can do $400 posted to tas 7470?

 Profile  

Offline
az supporter
az supporter

Joined: Thu Aug 18, 2011 12:09 am
Posts: 142
Location: burp's on the north side
Vehicle: 88 1ltr zook

Post Posted: Wed Sep 21, 2011 2:25 am 
Reply with quote Top  
fatz wrote:
id take the engine if you can do $400 posted to tas 7470?


ive never posted something of this size, id imagine it would cost a bit??

_________________
when boredom sets in ....

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Post Posted: Wed Sep 21, 2011 3:52 am 
Reply with quote Top  
juzzys wrote:
fatz wrote:
id take the engine if you can do $400 posted to tas 7470?


ive never posted something of this size, id imagine it would cost a bit??


You can not post anything over 20 Kg's mate :wink:

_________________
Old farts sometimes know some stuff you don't.

 Profile WWW  

Offline
az supporter
az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Post Posted: Wed Sep 21, 2011 4:53 am 
Reply with quote Top  
http://www.e-go.com.au/home.do;jsession ... 88ED627B7F

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 64 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours