auszookers.com
https://auszookers.com/forum/

Suzuki sierra ute project for sale
https://auszookers.com/forum/viewtopic.php?f=7&t=26016		 Page 1 of 1
Author:  charlie_brown [ Wed Sep 21, 2011 10:25 am ]
Post subject:  Suzuki sierra ute project for sale
as above. LWB ute for sale. I was going to to chop the blue SWB tub into an extra cab, but no time and nowhere to do the work.

1987 LWB ute
1.3 manual
wide track diffs
2" lifted springs
rear ARB locker
rear disc brake conversion
steel tray (including drop sides)
bullbar with spotties
sidesteps/brushbars (need some restoration)
Momo steering wheel
235x75x15R tyres on good offset rims (2 tyres near new)

Comes with spares:
Subaru brake master cylinder
aftermarket sports seats (from Swift) mounted to adapter rails
extended front shock hoops (supplied loose - not welded to chassis)
inboard rear shock mounts (supplied loose - not welded to chassis)
longer shocks
standard springs
extra front bar with indicators
SWB tub that I was going to chop and put onto the ute chassis (that's why the doors and front clip are blue) - includes dashboard
2" body lift kit
pair of doors with minor rust (was going to make into half doors)
factory Suzuki 2 piece hardtop with most accessories (missing one gas strut)
aluminium drop sides from hilux (not in photos)
spare front brake calipers
few other bits and pieces that I can't think of

The bad:
the cab has rust in the floor and some in the sills (body straight and glass is good)
last time I drove it one of the rear brakes was dragging
not started for a little while so may not be running cleanly but was running well last time I drove it around the backyard
clutch throwout bearing needs attention
some minor oil leaks
only one standard ute seat (which was chewed by the dog)

Not registered and no RWC.

If there is no interest I will consider splitting the ute up, but I'd much prefer selling as a complete package. The lucky buyer can then split if they wish.

Price: $2600 for the lot
Location: Toowong 4066

Contact Charlie on email (cabrown70@hotmail.com) or on 0401 026 089.

I'm in the process of moving so I won't have a lot of time during the week, but can make time on the weekend/s.

Please note that the pink bike in the pictures is not included! If there are photos of tools etc these are not included either
Author:  monley [ Wed Sep 21, 2011 12:42 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
Shit!!! Why can't you be in W.A. :(

If you part out i would be keen on the the rear locker ( RD88 i assume?).
Author:  Tripa [ Wed Sep 21, 2011 9:07 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
Pm me if u want to move on the momo wheel... I'm sure u could sell it without loosing overall price on the car ;)
Author:  suzi-fan-22 [ Wed Sep 21, 2011 11:43 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
charlie_brown wrote:
extended front shock hoops (supplied loose - not welded to chassis)
inboard rear shock mounts (supplied loose - not welded to chassis)


hey mate what shocks are these intended to run?
Author:  seen [ Thu Sep 22, 2011 4:19 am ]
Post subject:  Re: Suzuki sierra ute project for sale
Hav u got any pics of how bad the rust is
Author:  charlie_brown [ Fri Sep 23, 2011 8:45 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.
Author:  607CHA [ Sat Sep 24, 2011 12:05 am ]
Post subject:  Re: Suzuki sierra ute project for sale
I'll take the locker and bits if end up parting out
Author:  607CHA [ Sat Sep 24, 2011 12:06 am ]
Post subject:  Re: Suzuki sierra ute project for sale
Would the cab fit on a swb soft chassis
Author:  suzi-fan-22 [ Sun Sep 25, 2011 12:28 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
charlie_brown wrote:
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.


i meant how much longer?
Author:  suzi-fan-22 [ Sun Sep 25, 2011 12:28 pm ]
Post subject:  Re: Suzuki sierra ute project for sale
charlie_brown wrote:
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.


i meant how much longer?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/