| auszookers.com https://auszookers.com/forum/ |
|
| Very tough WT diffs https://auszookers.com/forum/viewtopic.php?f=7&t=26047 |
Page 1 of 1 |
| Author: | PJ.zook [ Thu Sep 22, 2011 9:07 am ] |
| Post subject: | Very tough WT diffs |
Im still parting out zook, time for the diffs to go. FRONT DIFF: -ARB air locker -CrMo shafts -CrMo CV's -Vitara vented rotors and calipers -Fully rebuilt not long ago REAR DIFF: -Lockright locker -Calmini HD axles -Disc brakes -Fully rebuilt not long ago Will throw in four rear lifted Ironman springs for your RUF conversion. After $3000 |
|
| Author: | denty802 [ Thu Sep 22, 2011 9:39 am ] |
| Post subject: | Re: Very tough WT diffs |
this would be sweet |
|
| Author: | Built4thrashing [ Fri Sep 23, 2011 1:54 am ] |
| Post subject: | Re: Very tough WT diffs |
denty802 wrote: this would be sweet
then buy them. Pj you forgot to mention the airlocker has almost no use. Did you end up connecting the compressor and using it at all? |
|
| Author: | sogone [ Fri Sep 23, 2011 4:55 am ] |
| Post subject: | Re: Very tough WT diffs |
Hmmmmmmmmm. Interesting. |
|
| Author: | PJ.zook [ Fri Sep 23, 2011 6:37 am ] |
| Post subject: | Re: Very tough WT diffs |
Yeh nah never used the locker, I had diffs back together literally 15min before I left for Robe, never had a chance to run airlines, switches, then got back, zook sat there for a while and I bought a Pathfinder. |
|
| Author: | Daves4wd [ Fri Sep 23, 2011 8:26 am ] |
| Post subject: | Re: Very tough WT diffs |
Wish I had the cash buy that in a heart beat |
|
| Author: | PJ.zook [ Mon Sep 26, 2011 7:17 am ] |
| Post subject: | Re: Very tough WT diffs |
BUMP |
|
| Author: | sogone [ Mon Sep 26, 2011 11:21 am ] |
| Post subject: | Re: Very tough WT diffs |
Spoke with the minister. Baw Bow. Apprently $3500 so far on my zook this month is too much. |
|
| Author: | PJ.zook [ Tue Oct 04, 2011 5:40 am ] |
| Post subject: | Re: Very tough WT diffs |
sogone wrote: Spoke with the minister. Baw Bow. Apprently $3500 so far on my zook this month is too much.
Yeh its all good (you need to squirrel away cash like me other mates hehe) |
|
| Author: | denty802 [ Tue Oct 04, 2011 5:52 am ] |
| Post subject: | Re: Very tough WT diffs |
not seperating them yet? also im assuming if you did seperate them they are stock gearing still? |
|
| Author: | PJ.zook [ Tue Oct 04, 2011 6:04 am ] |
| Post subject: | Re: Very tough WT diffs |
I can separate if you like, they are stock gearing as I ran Series3 rockhoppers in the transfer. |
|
| Author: | sogone [ Tue Oct 04, 2011 10:32 am ] |
| Post subject: | Re: Very tough WT diffs |
How much for rear pj? |
|
| Author: | denty802 [ Thu Oct 06, 2011 11:52 pm ] |
| Post subject: | Re: Very tough WT diffs |
cool, what would you be chasing for the front? |
|
| Author: | PJ.zook [ Wed Oct 19, 2011 7:39 am ] |
| Post subject: | Re: Very tough WT diffs |
sogone wrote: How much for rear pj? For the rear $600 would do (custom disc brake setup, Calmini HD axle shafts, Lockright lockers with couplers, everything rebuilt) denty802 wrote: cool,
what would you be chasing for the front? For the front $1500 would do (CrMo shafts and CV's, ARB locker, vented rotors and LWB Vitara calipers, everything rebuilt) |
|
| Author: | denty802 [ Wed Oct 19, 2011 8:04 am ] |
| Post subject: | Re: Very tough WT diffs |
hmm im keen but hopefully they are still available in a few weeks when i've got a few more dollars, |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|