auszookers.com • View topic - G16B for sale. (Blown head gasket)

Board index » Shift It And Find It » Getting rid of stuff

G16B for sale. (Blown head gasket)

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

fluffoffal

Joined: Thu Apr 14, 2011 10:16 am
Posts: 90
Location: Sunshine Coast

Posted: Mon Oct 10, 2011 5:16 am

Hey.
Selling a g16B motor out of a 92 LWB Vitara manual.
Blew the head gasket at 260,000km's. The motor still ran and drove no worries, just had to remove plugs to discharge coolant from cylinder when starting.
The block is fine and has no cracks or damage.
Previous owner of the car had the head rebuilt a year before I got it, but investigations have uncovered that inferior gasket kit was used and it doesn't even appear that the head bolts were replaced with new ones. What a waste of money that was.
Motor is complete but does not come with accessories, alternator, starter motor etc.
Also got some brand new coil spacers for sale. 2x30mm and 2x50mm.
$75.00 for the spacers and $250ono for the motor.
Anyone keen, pm me or call me on 0413327085.
I'm on the Sunshine Coast.

You do not have the required permissions to view the files attached to this post.

Last edited by fluffoffal on Mon Oct 10, 2011 10:08 am, edited 1 time in total.

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Mon Oct 10, 2011 7:22 am

Give ya 200 if your keen to freight.

fluffoffal

Joined: Thu Apr 14, 2011 10:16 am
Posts: 90
Location: Sunshine Coast

Posted: Mon Oct 10, 2011 9:45 am

I think frieght to Darwin would be pretty expensive man.

2stroker

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Posted: Mon Oct 10, 2011 10:36 pm

Does it have ecu and loom with it

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Tue Oct 11, 2011 2:12 am

Yeah probably about $150. I know this. I buy big stuff all the time. If your happy to freight ill buy it.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Oct 11, 2011 2:37 am

sogone wrote:

Give ya 200 if your keen to freight.

So you offer him LESS than his already low price, then ask him to freight it? :roll:

Packing a motor for freight (safely) is a PITA.

_________________
2013 GV
1998 SV420 ute

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Tue Oct 11, 2011 3:41 am

Fatzook wrote:

sogone wrote:

Give ya 200 if your keen to freight.

So you offer him LESS than his already low price, then ask him to freight it? :roll:

Packing a motor for freight (safely) is a PITA.

He did say Ono. And there's no point talking compensation for his time if his not willing to freight. At least I'm interested in buying it, not filling his thread with opinions.

fluffoffal

Joined: Thu Apr 14, 2011 10:16 am
Posts: 90
Location: Sunshine Coast

Posted: Tue Oct 11, 2011 6:10 am

sogone wrote:

Yeah probably about $150. I know this. I buy big stuff all the time. If your happy to freight ill buy it.

I've got some local interest so I'll see how that goes. If it falls through, I'll let you know.

fluffoffal

Joined: Thu Apr 14, 2011 10:16 am
Posts: 90
Location: Sunshine Coast

Posted: Tue Oct 11, 2011 6:12 am

No loom. I literally did a straight swap with an import motor, plugged it all in, set the TPS and drove to work the next day.

Page 1 of 1

[ 9 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum