| auszookers.com https://auszookers.com/forum/ |
|
| FS PERTH: Brake master cyl to suit 1L with disk fronts https://auszookers.com/forum/viewtopic.php?f=7&t=26806 |
Page 1 of 1 |
| Author: | sstteevvee [ Sun Oct 16, 2011 6:12 am ] |
| Post subject: | FS PERTH: Brake master cyl to suit 1L with disk fronts |
Hi guys, I'm selling a near new master cyl to suit a 1L with disk fronts. The cylinder was bought from suzistore and turned out to be the wrong one as my zook has drums all round. It has been installed but has had very little use as it was causing the drums to "stick on" I've put a link to the suzistore website and put pics of actual cylinder up $120ono http://www.suzistore.com.au/shopexd.asp?id=866 
Mob is 0422 789 854 Thanks Steve |
|
| Author: | sstteevvee [ Wed Oct 26, 2011 1:51 am ] |
| Post subject: | Re: FS PERTH: Brake master cyl to suit 1L with disk fronts |
bump |
|
| Author: | 2stroker [ Wed Oct 26, 2011 6:22 am ] |
| Post subject: | Re: FS PERTH: Brake master cyl to suit 1L with disk fronts |
That doesn't sound right to me, it is the drum brake ones that have the fluid return dampener and when used on discs they cause them to hold. If you use a disc brake one on drums all it does is cause fluid to return to the master cylinder too quickly. |
|
| Author: | sstteevvee [ Wed Oct 26, 2011 11:34 am ] |
| Post subject: | Re: FS PERTH: Brake master cyl to suit 1L with disk fronts |
Yea, not too sure on the specifics 2stroker however i know that it doesnt work with drums all round. This is the thread where i figured that out http://www.auszookers.com/index.php?nam ... ake+issues Anyway i ended up sourcing a used master cyl and put a seal kit into it which got rid of some probs. I then had to replace the 2 rear wheel cylinders coz they were leaking. It was a mega pain in the ass but touch wood they're finally sorted |
|
| Author: | sstteevvee [ Tue Nov 08, 2011 10:46 am ] |
| Post subject: | Re: FS PERTH: Brake master cyl to suit 1L with disk fronts |
Bump |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|