well i spoke with him, he said it owes him about $1500, all bearings, gear box and axle are all good. Bottom he'll take atm is $1000 otherwise he's better off getting a new cab for it.
Would be good to put a moke body on
| auszookers.com https://auszookers.com/forum/ |
|
| Coily parts BRISBANE UPDATED https://auszookers.com/forum/viewtopic.php?f=7&t=28432 |
Page 1 of 3 |
| Author: | Fmoss3 [ Thu Dec 08, 2011 2:18 am ] |
| Post subject: | Coily parts BRISBANE UPDATED |
Hey guys, selling this on behalf of a friend NOW PARTING Pricing is as follows Front diff complete, has new calipers, pads, hub seals, tie rod ends etc $200 Rear diff complete $200 Front Radius arms, straight $100 Rear Radius arms, straight $100 Gearbox SOLD PENDING PAYMENT Transfer $100 Near perfect head $100 alternator $40 fuel pump $40 Parts that are sold chassis carb wheels/tyres steering box fuel tank Will have some of my own left over stuff soon with pics including tow bar brand new water pump unused half bar with side steps and protector rails, designed to mount to standard steel bar Name a price on any other parts you see that you are interest in. Prices are currently fix but as time goes will be more towards ONO Currently located at Pinkenba, can deliver to local area. Mobile 0417071082, ask for Garry Or send me a PM |
|
| Author: | Fmoss3 [ Thu Dec 08, 2011 2:20 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
more pics |
|
| Author: | Fatzook [ Thu Dec 08, 2011 3:18 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
Hey mate. What will he take for the fuel tank? To be honest he will be flat out getting $800 for that roller. The diffs are worth next to nothing and hard to sell, the arms will sell if they are straight, the engine would fetch $200-300 inc head etc, gearbox $150-250 depending on condition, the chassis is worthless, so is the transfercase and suspension. Was this rolled? or did he buy it for the tub? |
|
| Author: | Fmoss3 [ Thu Dec 08, 2011 3:37 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
Hey mate I believe that the cab had been taken off it for a cut job at some point. Dont believe he'd be selling the tank separately but if anything changes, you'll be first on the list. He is looking at getting one of JML's sierra bar's or an ARB one so a good bar could be considered in the price |
|
| Author: | jonno_racing [ Thu Dec 08, 2011 4:09 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
the rear diff will sell, as they bend and have week axels... but id say more around the $800. |
|
| Author: | Fmoss3 [ Thu Dec 08, 2011 6:58 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
well i spoke with him, he said it owes him about $1500, all bearings, gear box and axle are all good. Bottom he'll take atm is $1000 otherwise he's better off getting a new cab for it. Would be good to put a moke body on
|
|
| Author: | Fmoss3 [ Sun Dec 11, 2011 1:48 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane |
bump, everyone says $800 so that sounds good |
|
| Author: | SSSIERA [ Sun Dec 11, 2011 2:06 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
other half of a coily is on gumtree for 1000 bucks in perth! no engine or gearbox |
|
| Author: | juzzys [ Sun Dec 11, 2011 2:07 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
anyone know of a coily cab for sale?? |
|
| Author: | jimbo_jones [ Sun Dec 11, 2011 3:31 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
juzzys wrote: anyone know of a coily cab for sale??
um did you read the post above yours??? ^^^^^ 
|
|
| Author: | charlie [ Sun Dec 11, 2011 4:06 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
Whats the motor like if ok condition how much for the motor. |
|
| Author: | Fmoss3 [ Mon Dec 12, 2011 1:36 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
Bump charlie wrote: Whats the motor like if ok condition how much for the motor.
As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc edit - sorry haven't got a price yet as wasn't previously parting, i'll find out and put it up asap also i believe it has a webber on it and with the exception to bearings/rings and piston heads, is complete e.g. fuel pump, alternator... |
|
| Author: | mr.green [ Mon Dec 12, 2011 7:51 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
Fmoss3 wrote: As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc
 sorry dude but that is funny 
|
|
| Author: | Fmoss3 [ Mon Dec 12, 2011 12:52 pm ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
mr.green wrote: Fmoss3 wrote: As the ad says, motor is in good condition but has a score in the bore. currently has no piston heads or bearings/rings etc sorry dude but that is funny well basically what i mean is that its complete and was running well. head, cam, dizzy, alternator, starter etc are all good. the mark in the bore may not be that bad, im not a professional engine builder but i'd suggest the block is munted. judging by the design im guessing you cant bore it our or sleave it, more likely its easier to get another block but yeah. can be bought as a whole or might be separated |
|
| Author: | Fmoss3 [ Wed Dec 14, 2011 12:04 am ] |
| Post subject: | Re: Coily parts BRISBANE Most prices up |
bump |
|
| Author: | juzzys [ Thu Dec 15, 2011 7:10 am ] |
| Post subject: | Re: Suzuki Sierra Coily Sprung Rolling Chassis Brisbane $800 |
jimbo_jones wrote: juzzys wrote: anyone know of a coily cab for sale?? um did you read the post above yours??? ^^^^^ if you read the time we posted at around the same time.. 
|
|
| Author: | Fmoss3 [ Sun Dec 18, 2011 7:43 pm ] |
| Post subject: | Re: Coily parts BRISBANE Most prices up |
bump |
|
| Author: | Fmoss3 [ Mon Dec 19, 2011 3:08 am ] |
| Post subject: | Re: Coily parts BRISBANE Most prices up |
UPDATED |
|
| Author: | Fmoss3 [ Wed Dec 21, 2011 1:16 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
UPDATED AGAIN |
|
| Author: | tanshi [ Wed Dec 21, 2011 2:44 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
give ya $50 for the front diff |
|
| Author: | Fmoss3 [ Wed Dec 21, 2011 2:57 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
tanshi wrote: give ya $50 for the front diff
umm, no |
|
| Author: | tanshi [ Wed Dec 21, 2011 3:35 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
when you still have it in 6 months let me know |
|
| Author: | Fmoss3 [ Wed Dec 21, 2011 3:59 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
is that like offering something_else 2 grand for his LJ81 ute? everyone is entitled to their opinions and make stupid low ball offers. Fatzook said the chassis was worthless, yet it was the first thing to sell. Thats not a go a Fatzook, its just that in his opinon and to him the chassis was useless but thankfully we live in a world where everyone isn't the same, have the same needs or share the same opinons. If the entire front diff assembly is still for sale in 6 months, you can have it for $300 
|
|
| Author: | tanshi [ Wed Dec 21, 2011 4:24 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
parts are worth what people will pay. a good pair of WT sierra diffs are worth, $400. and are in alot more demand than coily diffs, a good pair of LJ diffs are worth $200 a pair and are alot more demanded than coily diffs, how the hell are coily diffs in any ones opinion worth $600 a pair?? |
|
| Author: | Rusho [ Wed Dec 21, 2011 4:26 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
tanshi wrote: parts are worth what people will pay.
a good pair of WT sierra diffs are worth, $400. and are in alot more demand than coily diffs, a good pair of LJ diffs are worth $200 a pair and are alot more demanded than coily diffs, how the hell are coily diffs in any ones opinion worth $600 a pair?? Depends how bad you need one They are a weak unit and break mounts etc all day long.
|
|
| Author: | tanshi [ Wed Dec 21, 2011 4:28 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
All the more reason not to buy another one *shrugs* |
|
| Author: | Rusho [ Wed Dec 21, 2011 5:00 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
tanshi wrote: All the more reason not to buy another one *shrugs*
What options would you suggest for coily owners then Add an equally weak jimny diff. Or fabricate a leafy diff (not an easy job!!)
|
|
| Author: | Fmoss3 [ Wed Dec 21, 2011 5:10 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
speaking of which, i just sold a front and a rear jimny diff centre which had surface rust on them for $100 the pair to a Gearbox place i send a lot of work to. he reckons cleaned up he will sell them for in excess of $500 for both. you can argue that they are worth nothing all you like but i think i'd take his opinion. gave me cash on the spot and was happy as a pig in shit. and you want to offer $50 for a full front diff with new hub seals, rotors etc? |
|
| Author: | tanshi [ Wed Dec 21, 2011 5:17 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
From a company you expect to have to pay rediculous amounts, cos the come with some sort of warranty. second had off the net with unknown condition is a long way from paying what a gearbox shop charges. |
|
| Author: | Fmoss3 [ Wed Dec 21, 2011 5:20 am ] |
| Post subject: | Re: Coily parts BRISBANE UPDATED |
thats right, and he took $50 cash for a jimny front diff with surface rust on the gears. im offering a complete front diff in good working condition with everything on it. edit - good working calipers and near new rotors would nearly be worth $50 |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|