auszookers.com :: View topic

Mr Rocky I have 2 big chests full of LJ50 stuff I have been saving for years, I think will get a bit of interest, some of it is new stuff. I know there is a brand new distributor in there and a crank with new bearings it was done years ago and is still wraped in brown grease paper from the engine shop.

I will keep you posted once I start going through it.

I know there is a ... crank with new bearings it was done years ago and is still wraped in brown grease paper from the engine shop.

I will keep you posted once I start going through it.

photos of the softop mate.. quite keen
Brad

have you , or some other reader , got a lj80 rear tub ( as in rear gaurds, and floor ) .....i'm looking at extending the lj80 gaurds, as i want to fit coils ,and rear steer....my spare body's are still drivable.....i just need a rear cut

Hi 2Stroker - I need an LJ50 Bonnet and Grill if you have please PM me.

tonyevans wrote:

Hi 2Stroker - I need an LJ50 Bonnet and Grill if you have please PM me.

Sorry Tony not selling any panels at the moment

Author:	2stroker [ Mon Dec 26, 2011 8:56 am ]
Post subject:	LJ stuff
LJ80 fuel tank - $25 LJ80 gearbox - $25 LJ80 soft top canopy, pretty good, needs a minor repair, clears are good and canvas is nice and soft - $100. More LJ stuff will be posted once I clean the LJ corner of the shed Ok some more bits to add: LJ heater box (Stockman) - $25 LJ or 1litre extractors - $50 1 x LJ front drum brake good spline - $10 LJ 80 Transfer case - $100

Author:	MrRocky [ Mon Dec 26, 2011 9:25 am ]
Post subject:	Re: LJ stuff
Ooooo more lj stuff plz

Author:	2stroker [ Mon Dec 26, 2011 10:30 am ]
Post subject:	Re: LJ stuff
Mr Rocky I have 2 big chests full of LJ50 stuff I have been saving for years, I think will get a bit of interest, some of it is new stuff. I know there is a brand new distributor in there and a crank with new bearings it was done years ago and is still wraped in brown grease paper from the engine shop. I will keep you posted once I start going through it.

Author:	Verm1n [ Mon Dec 26, 2011 11:19 am ]
Post subject:	Re: LJ stuff
photos of the softop mate.. quite keen Brad

Author:	MrRocky [ Mon Dec 26, 2011 11:28 am ]
Post subject:	Re: LJ stuff
2stroker wrote: Mr Rocky I have 2 big chests full of LJ50 stuff I have been saving for years, I think will get a bit of interest, some of it is new stuff. I know there is a brand new distributor in there and a crank with new bearings it was done years ago and is still wraped in brown grease paper from the engine shop. I will keep you posted once I start going through it.

auszookers.com https://auszookers.com/forum/

LJ stuff https://auszookers.com/forum/viewtopic.php?f=7&t=28979	Page 1 of 1

Author:	303zuke [ Mon Dec 26, 2011 11:45 am ]
Post subject:	Re: LJ stuff
2stroker wrote: I know there is a ... crank with new bearings it was done years ago and is still wraped in brown grease paper from the engine shop. I will keep you posted once I start going through it. I will be the first to put my hand up. Price?

Author:	2stroker [ Tue Dec 27, 2011 1:34 am ]
Post subject:	Re: LJ stuff
Verm1n wrote: photos of the softop mate.. quite keen Brad PM sent to you Brad

Author:	tonyevans [ Tue Dec 27, 2011 9:12 pm ]
Post subject:	Re: LJ stuff
Hi 2Stroker - I need an LJ50 Bonnet and Grill if you have please PM me.

Author:	2stroker [ Tue Dec 27, 2011 9:38 pm ]
Post subject:	Re: LJ stuff
hillbilly wrote: have you , or some other reader , got a lj80 rear tub ( as in rear gaurds, and floor ) .....i'm looking at extending the lj80 gaurds, as i want to fit coils ,and rear steer....my spare body's are still drivable.....i just need a rear cut Why dont you just widen the rear flares...

Author:	2stroker [ Tue Dec 27, 2011 9:40 pm ]
Post subject:	Re: LJ stuff
tonyevans wrote: Hi 2Stroker - I need an LJ50 Bonnet and Grill if you have please PM me. Sorry Tony not selling any panels at the moment

Author:	tonyevans [ Tue Dec 27, 2011 10:15 pm ]
Post subject:	Re: LJ stuff
2stroker wrote: tonyevans wrote: Hi 2Stroker - I need an LJ50 Bonnet and Grill if you have please PM me. Sorry Tony not selling any panels at the moment You really should you know - They tack up more room in the shed than small parts

Author:	2stroker [ Wed Dec 28, 2011 8:47 am ]
Post subject:	Re: LJ stuff
Ok some more bits to add: LJ heater box (Stockman) - $25 LJ or 1litre extractors - $50 1 x LJ front drum brake good spline - $10 LJ 80 Transfer case - $100

Author:	Rhino [ Wed Dec 28, 2011 9:24 am ]
Post subject:	Re: LJ stuff
what condition is the tank in mate?

Author:	2stroker [ Wed Dec 28, 2011 9:35 am ]
Post subject:	Re: LJ stuff
Mate it has had a bump or two but is still good, not badly bent up or anything.

Author:	ke70legend [ Thu Feb 09, 2012 3:00 am ]
Post subject:	Re: LJ stuff
hey dude im wanting a hole lj50 wagon any condition my email is chrispiebrighton@hotmail.com i will look at anything!! i want to start a new project

Author:	Mac [ Thu Feb 09, 2012 4:31 pm ]
Post subject:	Re: LJ stuff
Hi 2stroker Would like to get my hands on the heater box if the core is in good condition. Could you send a picture so I can confirm its the right one? Cheers Muir

Author:	Ben_Sierra [ Thu Feb 09, 2012 5:08 pm ]
Post subject:	Re: LJ stuff
Do you have an LJ50 wiper motor?

Author:	2stroker [ Thu Feb 09, 2012 5:11 pm ]
Post subject:	Re: LJ stuff
Hello everyone, this is an old post from last year and has been re dug up, sorry but most of this stuff is long gone.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/