auszookers.com
https://auszookers.com/forum/

QLD G13B GTi motor
https://auszookers.com/forum/viewtopic.php?f=7&t=29540		 Page 1 of 1
Author:  Junior_91 [ Fri Jan 13, 2012 11:10 pm ]
Post subject:  QLD G13B GTi motor
Have a G13B GTi motor for sale in Ipswich.


Full motor no loom or ecu. Will post pics later.


$700 Ono
Author:  Rusho [ Sat Jan 14, 2012 12:15 am ]
Post subject:  Re: QLD G13B GTi motor
Will cuzztec be able make a custom loom/ecu and dizzy adaptor??? Or is he called jimtec these days?
Author:  toiletduck [ Sat Jan 14, 2012 4:00 am ]
Post subject:  Re: QLD G13B GTi motor
Rusho wrote:
Will cuzztec be able make a custom loom/ecu and dizzy adaptor??? Or is he called jimtec these days?


:rofl:
Author:  boof35 [ Sun Jan 15, 2012 4:29 am ]
Post subject:  Re: QLD G13B GTi motor
is it as stuffed as the last eng you sold
Author:  bek [ Sun Jan 15, 2012 4:54 am ]
Post subject:  Re: QLD G13B GTi motor
if you're not interested in the engine and have nothing positive to say then SHUT THE FUCK UP AND DON'T POST you stupid cock smoker.
Author:  steak_knife [ Sun Jan 15, 2012 4:55 am ]
Post subject:  Re: QLD G13B GTi motor
:P You tell em Bek!!!! :lol:

Oppppps, am I in trouble now?? 8O
Author:  Rusho [ Sun Jan 15, 2012 4:57 am ]
Post subject:  Re: QLD G13B GTi motor
bek wrote:
if you're not interested in the engine and have nothing positive to say then SHUT THE FUCK UP AND DON'T POST you stupid cock smoker.


But I was asking a serious question :roll:
Author:  Ben_Sierra [ Sun Jan 15, 2012 5:12 am ]
Post subject:  Re: QLD G13B GTi motor
bek wrote:
if you're not interested in the engine and have nothing positive to say then SHUT THE FUCK UP AND DON'T POST you stupid cock smoker.


Um, only fair and reasonable questions posted as far as I can see, although perhaps boof35 should add some context to his post...

If there is anything that shouldn't be here, I'll remove it, otherwise, calm the fuck down...
Author:  Junior_91 [ Sun Jan 15, 2012 5:31 am ]
Post subject:  Re: QLD G13B GTi motor
boof35 wrote:
is it as stuffed as the last eng you sold


What are you on about?
Author:  mrgtt34 [ Sun Jan 15, 2012 7:06 am ]
Post subject:  Re: QLD G13B GTi motor
I know what he is on about , the good running 1.3 that was missing a piston skirt! no one wants to get ripped off mate be careful what you sell !!!!
Author:  Junior_91 [ Sun Jan 15, 2012 7:16 am ]
Post subject:  Re: QLD G13B GTi motor
Well thats news to me bud, was fine when it was in my car.


And instead of shooting your mouth off he could have asked me via pm if i knew anything...
Author:  nicko [ Sun Jan 15, 2012 7:21 am ]
Post subject:  Re: QLD G13B GTi motor
I agree with jnr, should have grew a set and mentioned it prior, instead of dragging your shit off your shoulder in here, it's my motor not his, he is doing me a favour
Author:  mrgtt34 [ Sun Jan 15, 2012 7:25 am ]
Post subject:  Re: QLD G13B GTi motor
all good mate we built it. no worth fighting over $150. you said you drove it and it was fine . just be careful mate the next guy mite be so frendly.
Author:  Junior_91 [ Sun Jan 15, 2012 7:28 am ]
Post subject:  Re: QLD G13B GTi motor
Well if it was broke i would have happily given the money back. As i said it was driving fine when i pulled it.
Author:  boof35 [ Sun Jan 15, 2012 7:35 am ]
Post subject:  Re: QLD G13B GTi motor
pm sent
Author:  Junior_91 [ Sun Jan 15, 2012 7:36 am ]
Post subject:  Re: QLD G13B GTi motor
boof35 wrote:
pm sent


All good :helloo:
Author:  royce [ Sun Jan 15, 2012 7:55 am ]
Post subject:  Re: QLD G13B GTi motor
you know all you redneck tough guys that buy some cheap piece of shit and have a tanty when its shit and think the world owes you a favour are being laughed at by everyone else dont you?
Author:  remydog05 [ Sun Jan 15, 2012 8:42 am ]
Post subject:  Re: QLD G13B GTi motor
$150 for an engine that runs and you sooking??? :roll:
suck it up princes!
Author:  jonno_racing [ Sun Jan 15, 2012 9:17 am ]
Post subject:  Re: QLD G13B GTi motor
Rusho wrote:
Will cuzztec be able make a custom loom/ecu and dizzy adaptor??? Or is he called jimtec these days?


depends on what mk..

loom can be done easy :)
Author:  Junior_91 [ Sun Jan 15, 2012 9:23 am ]
Post subject:  Re: QLD G13B GTi motor
I'll post a photo tomorrow.
Author:  Junior_91 [ Mon Jan 23, 2012 7:49 am ]
Post subject:  Re: QLD G13B GTi motor
$600 come and get it
Author:  89_ZOOKie [ Thu Jan 26, 2012 4:11 am ]
Post subject:  Re: QLD G13B GTi motor
hey mate how many kms on it and is it still for sale?
Author:  Junior_91 [ Thu Jan 26, 2012 5:39 am ]
Post subject:  Re: QLD G13B GTi motor
Unsure of kms and yes it is for sale.
Author:  89_ZOOKie [ Thu Jan 26, 2012 10:21 am ]
Post subject:  Re: QLD G13B GTi motor
pm sent
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/