auszookers.com
https://auszookers.com/forum/

FS: Stuff...
https://auszookers.com/forum/viewtopic.php?f=7&t=30730		 Page 1 of 1
Author:  DarkHorse [ Sat Feb 25, 2012 6:18 pm ]
Post subject:  FS: Stuff...
A few bits and pieces I want to get out of the house:

GV Tough Dog shocks. Done about 25,000km in my car, unknown but not much before that. Adjustable gimmicky things, but do the job they have to. Suit around 40mm lift in GV, or twice that in a LWB Vit. See my build thread for some comparison photos. $50 the pair.
Image

Vit (G16B) Radiator from Want33s (ordered but not required.) Ally core with plastic tanks. Brand new, never fitted. $100.

Vit driver's side CV, used but in good condition. $50.

Vit windscreen washer bottle, no caps, pumps or pipes. $10.

Vit (J20) AC compressor. I've never had it fitted but it's in good nick and pulley spins nice and smoothly. $100

Weaco TropiCool 12V/240V cooler/warmer. Cooling works, but fan gets stuck sometimes, needs a nudge with a pin or blade through the grille and it spins fine again. Comes with 12V power cable only. $50.
Image
Author:  monley [ Sat Feb 25, 2012 8:32 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
Pin to eye measurement on the shocks please?
Author:  bazook [ Sat Feb 25, 2012 10:01 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
whats the spring like are they really stiff as ive had oda crap and they were to stiff
Author:  DarkHorse [ Sun Feb 26, 2012 11:02 am ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
Springs are <firm> in a stock car, quite nice with a bar and winch hanging off the front.

Monley I'll get measurements tonight when they're out, but here's an idea:
Image
Image
Author:  jesse_vit [ Sun Feb 26, 2012 7:58 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
will you post the front springs?
Author:  DarkHorse [ Sun Feb 26, 2012 8:30 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
Sure, will be pricey with the weight but cost's on you...

Monley:
389mm - 574mm
Image
Author:  monley [ Sun Feb 26, 2012 8:34 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
:( Compressed length is to long.
Author:  DarkHorse [ Sun Feb 26, 2012 8:37 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
Bigger bumpstops? ;)
Author:  monley [ Sun Feb 26, 2012 9:22 pm ]
Post subject:  Re: FS: Vit/GV bouncy bits (NSW)
DarkHorse wrote:
Bigger bumpstops? ;)



Na, the open length is also shorter than my current shocks. I just wanted adjustable wank factor :lol:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/