| auszookers.com https://auszookers.com/forum/ |
|
| FS (Brisbane) - Sierra bits UPDATED! https://auszookers.com/forum/viewtopic.php?f=7&t=30939 |
Page 1 of 1 |
| Author: | skeletonbobo [ Mon Mar 05, 2012 12:50 pm ] |
| Post subject: | FS (Brisbane) - Sierra bits UPDATED! |
THIS IS 100% UP TO DATE Make an offer, all parts must go! - 1 open front WT diffs - $150 each ONO - 1 open rear WT diff - $150 ONO - 6 point roll cage (8 point if you count tyre carrier points) can't go in with back seats but I can take out the tyre carrier bit if you want to run with seats) - 2 pairs of home made drop shackles (will lift car 2-3" and flex a heap downwards, great to throw on for a play day) - A set of 4 black sunnies 16*7" - A set of 4 1.5" Wheel spacers - 1 Starter motor Contact me preferably by text to 04 2424 4525 for speedy response, I can freight items also. |
|
| Author: | Junior_91 [ Mon Mar 05, 2012 2:00 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
I'll take the rear diff! |
|
| Author: | SM TOWN [ Mon Mar 05, 2012 2:53 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
do you have a standard bumper or standard vinal floor mats? |
|
| Author: | matfan [ Mon Mar 05, 2012 3:37 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Got doors in decent nick? |
|
| Author: | Maxi [ Mon Mar 05, 2012 3:40 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
PM'd Thanks |
|
| Author: | 055ETH [ Tue Mar 06, 2012 6:13 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
where in bris are you located? |
|
| Author: | skeletonbobo [ Wed Mar 07, 2012 11:57 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Only have passenger door. Caboolture north Bris No bumper sorry, no vinyl mats. |
|
| Author: | dono1 [ Wed Mar 07, 2012 12:52 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Can you post ip pics of the drop shackles? |
|
| Author: | skeletonbobo [ Tue Mar 13, 2012 9:36 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Update! I still have: 6 Point roll cage 1 * Rear open diff 2 * Front open diffs 2 * Pairs of drop shackles 1 * 35" shitty tyre on zook rim for spare 1 * 1.3L Gearbox 1 * Jack shaft? I think thats what it's called 1 * Starter motor for 1.3L 1 * Recently overhauled carb (cost me $350) 1 * Air box and pipes for 1.3L Make an offer!  Text 04 2424 4525 for quick response! |
|
| Author: | skeletonbobo [ Tue Mar 13, 2012 9:38 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Can freight anywhere for cheap too as I can use my works couriers! |
|
| Author: | zook83 [ Tue Mar 13, 2012 7:25 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
ill take the front diff i u can freight it to morayfield 
|
|
| Author: | skeletonbobo [ Wed Mar 14, 2012 10:06 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
zook83 - do you kiss your mother with that face?  Only 1 front diff left Sorry about the pictures, was the best I could do in the five minutes I was home yesterday afternoon, it's in two parts the front section bolts to the rear section and bolts to the floor, the tyre carrier bit bolts to the rear seat belt bolt holes and cant be used with a rear seat in unless you cut it off which would be a five minute job. I still have: 6 Point roll cage Set of 4 1.5" Wheelspacers for Sierra stud pattern Set of 4 16"*7" black sunnies barely used. 1 * Rear open diff 1 * Front open diff 2 * Pairs of drop shackles 1 * 35" shitty tyre on zook rim for spare 1 * 1.3L Gearbox 1 * Jack shaft? I think thats what it's called 1 * Starter motor for 1.3L 1 * Recently overhauled carb (cost me $350) 1 * Air box and pipes for 1.3L Make an offer! Text 04 2424 4525 for quick response!   
|
|
| Author: | Bennyzarb [ Wed Mar 14, 2012 4:35 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Hay mate I'm interested in your drop shackles can you upload a pic plz |
|
| Author: | kris_phillips528 [ Fri Mar 16, 2012 3:28 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Will the cage fit under a soft top? |
|
| Author: | zook83 [ Sat Mar 17, 2012 7:35 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
yeh mate no problems |
|
| Author: | zzyxxx [ Mon Mar 19, 2012 9:43 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Hey bud would you be keen on selling the carb +freight to Perth |
|
| Author: | skeletonbobo [ Mon Mar 19, 2012 4:47 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Carb - $150 + freight Still have roll cage which will fit a soft top Still have 1 front diff centre 1 * 1.3L gearbox 1 * 1.3L starter motor |
|
| Author: | Rusho [ Mon Mar 19, 2012 5:03 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits |
Who rebuilt the carb?? |
|
| Author: | skeletonbobo [ Wed Mar 21, 2012 10:49 am ] |
| Post subject: | FS (Brisbane)- Sierra bits UPDATEDPics of cage and drop shac |
Update - Carby gone I still have: 2 pairs of home made drop shackles 4 * Black sunnies 16x7 F100 offset 1 * 1.3L starter motor 6 point internal roll cage 1 * 1.3L Gearbox 1 set of four 1.5" wheel spacers to suit sierra text 04 2424 4525   
|
|
| Author: | Toyzuka [ Wed Mar 21, 2012 8:47 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
How much for the wheel spacers, freight to Vic ? |
|
| Author: | skeletonbobo [ Fri Mar 23, 2012 9:05 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
Paid $220 originally I'd do $180 inc freight. Text me on 04 2424 4525 if your interested. |
|
| Author: | matfan [ Fri Mar 23, 2012 11:33 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
If Toyzuka doesn't end up with those wheel spacers my brother might be interested. Have you got pics? Let me know |
|
| Author: | skeletonbobo [ Fri Mar 23, 2012 6:39 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
I don't on me no, they are just spacers, perfect condition etc look like any other, they are silver. First come first served, I've had wayyyyyy too many people stuff me around to bother holding things for people anymore. Text 04 2424 4525 if your interested. |
|
| Author: | skelaaleks [ Sun Mar 25, 2012 9:26 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
Are they diff housing or centers? |
|
| Author: | skeletonbobo [ Mon Mar 26, 2012 8:49 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
Centres |
|
| Author: | skeletonbobo [ Tue Mar 27, 2012 1:32 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits - pics of cage & drop shackl |
Gearbox sold. Still have (all to suit sierra) Cage Home made drop shackles Starter motor A set of 4 1.5" wheel spacers Drive shaft that goes from Gbox to Tcase Set of 4 black sunnies 16x7" Make an offer. 04 2424 4525 |
|
| Author: | skeletonbobo [ Wed Mar 28, 2012 4:24 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits UPDATED! |
bump! top, original post has been updated!
|
|
| Author: | Bugsta [ Mon Apr 16, 2012 8:40 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits UPDATED! |
What offset are these rims? |
|
| Author: | matt146x [ Tue Apr 24, 2012 7:42 am ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits UPDATED! |
will that cage fit into a hard top at all? |
|
| Author: | Tassierra [ Wed Apr 25, 2012 3:10 pm ] |
| Post subject: | Re: FS (Brisbane) - Sierra bits UPDATED! |
how much for the starter motor + freight to tasmania ? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|