What did you open this thread for jack ass?
| auszookers.com https://auszookers.com/forum/ |
|
| sold! https://auszookers.com/forum/viewtopic.php?f=7&t=31840 |
Page 1 of 1 |
| Author: | shakes [ Sun Apr 15, 2012 2:30 pm ] |
| Post subject: | sold! |
What did you open this thread for jack ass?
|
|
| Author: | foolsp33d [ Sun Apr 15, 2012 2:32 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
I so should of never got rid of this xfer  certainly kicking myself!!!
|
|
| Author: | Wazz [ Sun Apr 15, 2012 3:18 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Dont have a zook for sale aswell shakes? 
|
|
| Author: | shakes [ Sun Apr 15, 2012 3:37 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Wazz wrote: Dont have a zook for sale aswell shakes? maybe I do...  foolsp33d wrote: I so should of never got rid of this xfer certainly kicking myself!!!It's for sale you know 
|
|
| Author: | foolsp33d [ Sun Apr 15, 2012 3:42 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
yeh I realise that!!fer alot more than what I got rid of it for to! LOL |
|
| Author: | stockman [ Sun Apr 15, 2012 4:22 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
foolsp33d wrote: yeh I realise that!!fer alot more than what I got rid of it for to! LOL hah. Who makes the 6.1's? |
|
| Author: | sideways [ Sun Apr 15, 2012 4:59 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
stockman wrote: foolsp33d wrote: yeh I realise that!!fer alot more than what I got rid of it for to! LOL hah. Who makes the 6.1's? X2. And what's their high range ratio? |
|
| Author: | foolsp33d [ Sun Apr 15, 2012 5:22 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
from what I can recall... They were the rockhopper SIII...but I MAY be WRONG!!!! from http://www.roadlessgear.com/page/RGL/PROD/D/RG110 "The Series III gears have 6.129:1 gears installed and will provide you with a whopping 170% reduction in gearing in low range (21% in high range)." I never installed the case in a vehicle. Was part of a bulk purchase many years ago. cant be certain if they ARE truly those. |
|
| Author: | SierraDan [ Sun Apr 15, 2012 5:29 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Sound like 6.4s |
|
| Author: | just_cruizin [ Sun Apr 15, 2012 6:39 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Thought S3's were 5.1 which is great for 31 |
|
| Author: | shakes [ Sun Apr 15, 2012 6:51 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
foolsp33d wrote: from what I can recall... They were the rockhopper SIII...but I MAY be WRONG!!!! from http://www.roadlessgear.com/page/RGL/PROD/D/RG110 "The Series III gears have 6.129:1 gears installed and will provide you with a whopping 170% reduction in gearing in low range (21% in high range)." I never installed the case in a vehicle. Was part of a bulk purchase many years ago. cant be certain if they ARE truly those. winner 
|
|
| Author: | salih [ Sun Apr 15, 2012 9:22 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
im first in line i think just need to talk(beg) to the boss at home and il let ya know asap shakes |
|
| Author: | dank [ Sun Apr 15, 2012 11:42 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Do it salih. You won't look back! Gears are the best money spent on a Sierra. These are even better, buy it and bolt them in, can't get any easier. |
|
| Author: | shakes [ Mon Apr 16, 2012 6:59 am ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
salih wrote: im first in line i think just need to talk(beg) to the boss at home and il let ya know asap shakes First in line is first with cash in my hand I can give you a hand to fit if you need. |
|
| Author: | sogone [ Mon Apr 16, 2012 8:06 am ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Can we confirm that these are 5.1's? Check the number of spins of the output in low range? |
|
| Author: | Fatzook [ Mon Apr 16, 2012 9:13 am ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
just_cruizin wrote: Thought S3's were 5.1 which is great for 31 Nope. S1's were 4:1 ( or thereabouts) S2's were never a real product. But later on the Calmini 5.14:1's were given this name as they fit inbetween RH S1's and RH S3's. S3's were 6.1:1. I have owned these personally. Good gears. S4's were the replacement for the S3's. They came in a 6.4:1 ratio. I believe the S3's were the first gear to come with a lifetime warranty back in the day. |
|
| Author: | sogone [ Mon Apr 16, 2012 9:25 am ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
6.1s are fine also. |
|
| Author: | shakes [ Mon Apr 16, 2012 1:23 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
sogone wrote: Can we confirm that these are 5.1's? Check the number of spins of the output in low range? 6 and bit turns in low. And just over 1.5 turns in high... good enough or should I bust the case open and count teeth? Currently Sold pending payment |
|
| Author: | sogone [ Mon Apr 16, 2012 1:32 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Cool story shakes. I have some magic beans. I'll sell you these for x amount. There is an easy test that I could perform to actually make sure these beans are magic. But you should just take my word for it, an if you did ask me to perform said test then i would make a smart ass comment back and make it sound like an incredibly difficult task. Good luck with ya sale |
|
| Author: | Built4thrashing [ Mon Apr 16, 2012 3:26 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
shakes wrote: sogone wrote: Can we confirm that these are 5.1's? Check the number of spins of the output in low range? 6 and bit turns in low. And just over 1.5 turns in high... good enough or should I bust the case open and count teeth? Currently Sold pending payment that doesnt add up right. Im sure they are 6.1 gears as these are the ones i had in my sierra. |
|
| Author: | salih [ Mon Apr 16, 2012 4:54 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
ok well im piking them up tonight soooo are they bloody 6.1s or not... |
|
| Author: | stockman [ Mon Apr 16, 2012 5:24 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Count them and see. Put the case into low range, turn the input flange on revolution and count the revolutions of the output flanges. Don't worry about the .1, just make sure it turns 6 times. Then you know it's either 6.1's, 6.4's or 6.5's. |
|
| Author: | salih [ Mon Apr 16, 2012 5:32 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
ahh ok well shakes sayed he did it and it dos exactly that so shouled be all good... 33s here i come 
|
|
| Author: | Built4thrashing [ Mon Apr 16, 2012 5:43 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
salih wrote: ahh ok well shakes sayed he did it and it dos exactly that so shouled be all good... 33s here i come Just spoke to shakes and they are deffinately 6.1 S3 gears. These used to be in my old sierra and were perfect for 31-33 tyres. I had them in a SWB WT. Carby 1.3 on 3.9 diffs and twin lockers. The thing was a machine on the silverstones shakes is also selling. Ahh the memories. |
|
| Author: | salih [ Mon Apr 16, 2012 6:01 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
great. you recon if i go 33s need diff gears aswell or transfer will do ?? also im going a 1.6 carby in it so shouled help |
|
| Author: | suzukikid [ Mon Apr 16, 2012 6:29 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
Are these the ones I sold you jase? Haha |
|
| Author: | Built4thrashing [ Mon Apr 16, 2012 6:58 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
suzukikid wrote: Are these the ones I sold you jase? Haha Nup. they were 5.14 calmini gears. These were in a SPOA wreck i bought. |
|
| Author: | shakes [ Mon Apr 16, 2012 7:28 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
sogone wrote: Good luck with ya sale thanks who else want's to add their 2c? nearly a 2 page thread arguing something that was never needed to be argued and listed in the title? Anyone would think this thread is based in perth
|
|
| Author: | joel [ Mon Apr 16, 2012 7:37 pm ] |
| Post subject: | Re: sierra transfer with 6.1s, strengthened arms and lift (m |
sogone wrote: Cool story shakes. I have some magic beans. I'll sell you these for x amount. There is an easy test that I could perform to actually make sure these beans are magic. But you should just take my word for it, an if you did ask me to perform said test then i would make a smart ass comment back and make it sound like an incredibly difficult task. Good luck with ya sale  
|
|
| Author: | salih [ Tue Apr 17, 2012 12:07 am ] |
| Post subject: | Re: sold! |
thanks mate. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|