| auszookers.com https://auszookers.com/forum/ |
|
| [QLD] 2.5L V6 GV motor https://auszookers.com/forum/viewtopic.php?f=7&t=32070 |
Page 1 of 1 |
| Author: | Oldzook [ Tue Apr 24, 2012 11:57 am ] |
| Post subject: | [QLD] 2.5L V6 GV motor |
I have a 98 model v6 2.5L with 295K on the clock. Would benifit from a freshen up due to high kms. Didn't blow smoke or use oil, quite timing chains etc. The motor is a complete long motor, minus sensors. (so manifolds, injectors, sump ) Located at Greenbank, Southwest Brisbane. $200.00 For that price its pickup only.  Contact Charlie on 0438 304 115. |
|
| Author: | thesupervisor [ Mon May 07, 2012 10:28 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
how much posted to perth wa |
|
| Author: | swifty_ano [ Tue May 08, 2012 5:29 am ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
Far out that's cheap. People pay Much more then that for a g16b |
|
| Author: | DarkHorse [ Tue May 08, 2012 1:58 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
Wow that's tempting. If the car and I were in Brisbane I'd snap it straight up. Research time... |
|
| Author: | Fatzook [ Tue May 08, 2012 4:36 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
thesupervisor wrote: how much posted to perth wa Oldzook wrote: $200.00 For that price its pickup only. How much would you pay for someones time to make a skid, mount the motor, wrap it, load it, and take to depot? |
|
| Author: | twitchy [ Tue May 08, 2012 4:45 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
whats happening with the rest or did you just put a fresh donk in???????????? If I wasn't about to move I'd take that bastard too...... build a special one when I had time. |
|
| Author: | thesupervisor [ Tue May 08, 2012 6:09 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
id go $400 all up delivered to perth? |
|
| Author: | Oldzook [ Tue May 08, 2012 7:28 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
sorry pick up only the only parts i have left are window motors ,door handles & switches & tyres doors dash seats & other parts all went to tip i sold gv body & other parts for scrap weighed 1040 kg & got $143.00 |
|
| Author: | Fatzook [ Tue May 08, 2012 10:45 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
thesupervisor wrote: id go $400 all up delivered to perth? Shipping alone will be $250. So you offered him $50 less for his efforts 
|
|
| Author: | DarkHorse [ Tue May 08, 2012 11:59 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
PM Pete? |
|
| Author: | Fatzook [ Wed May 09, 2012 12:16 am ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
DarkHorse wrote: PM Pete? Yep. |
|
| Author: | thesupervisor [ Wed May 09, 2012 5:20 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
even at $500 i dont think he wants to ship it |
|
| Author: | Fatzook [ Wed May 09, 2012 6:52 pm ] |
| Post subject: | Re: [QLD] 2.5L V6 GV motor |
thesupervisor wrote: even at $500 i dont think he wants to ship it The dump is closer than the freight depot 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|