auszookers.com :: View topic - Selling/swapping 1L transfer case (with switch)

generally 1 litre switch cases go for around $200 just fyi

IMHO thats alot to pay for a 1L case as well swapping a standard case. I paid $400 for a case with
reduction gears fitted aswell as swapping a standard case and reduction gears & fitting cost ALOT
more than a 1L case. Just my 2c mate.

tanshi wrote:

generally 1 litre switch cases go for around $200 just fyi

That's on a good day.....

You can fit reduction gears to your 1 litre switched case.

swap my 1.3l transfer for your 1l transfer, done

he wants a 1.3.. and i want a 1L.. straight swap.. easy as pie

You can fit reduction gears to your 1 litre switched case.

Hahaha. And bang Goes the dinamite.

mrw82 wrote:

You can fit reduction gears to your 1 litre switched case.

You can, but only 6.5s will provide the complete set of gears for the swap. If he wants 4.16, 4.9 or 5.14s, he will need ONE gear from a 1.3 transfer. May as well start with a 1.3 case.

303zuke wrote:

mrw82 wrote:

You can fit reduction gears to your 1 litre switched case.

You can, but only 6.5s will provide the complete set of gears for the swap. If he wants 4.16, 4.9 or 5.14s, he will need ONE gear from a 1.3 transfer. May as well start with a 1.3 case.

Another reason why i want the 1.3 case

I did the 4.9 into my tintop (and had to use one of the gears) and now i want to get some 5.14s for the ute

On the weekend i pulled out the 1L case out of the ute and swapped it out with my 4.9s from the tintop to see if it'll be good enough or if i should get the 5.14s

Anyway....long story short.....the bloke i brought the car off said it was a 1L case so i took his word for it but when i took them both out....they look bloody identical!!!! :-?

How do you tell the difference between a 1L case and a 1.3?

Author:	masterA [ Fri Apr 27, 2012 11:02 am ]
Post subject:	Selling/swapping 1L transfer case (with switch)
Not too sure if i should put this under Getting rid of stuff or I want it?! Anyway....after my last weekend outing and having a maiden run with the Stockman, the 1L transfer combined with 31s and an MK3 engine isn't really a fantastic combination (even with 4.1 diff the t/case reduction is not enough).....so i've decided to sell the 1L transfer case (with switch) and get myself some proper reduction gears. Im looking to sell the 1L t/case for around $280 but i will need your old (standard) t/case as i will be buying new reduction gears and will need a case to fit them Let me know if anyone is interested to do a deal so i can go shopping for some gears

Author:	ZookiMonsta [ Fri Apr 27, 2012 2:29 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
IMHO thats alot to pay for a 1L case as well swapping a standard case. I paid $400 for a case with reduction gears fitted aswell as swapping a standard case and reduction gears & fitting cost ALOT more than a 1L case. Just my 2c mate.

Author:	tanshi [ Fri Apr 27, 2012 2:31 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
generally 1 litre switch cases go for around $200 just fyi

Author:	mrw82 [ Fri Apr 27, 2012 2:49 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
tanshi wrote: generally 1 litre switch cases go for around $200 just fyi That's on a good day..... You can fit reduction gears to your 1 litre switched case.

Author:	ZookiMonsta [ Fri Apr 27, 2012 6:29 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
tanshi wrote: generally 1 litre switch cases go for around $200 just fyi Yes, but not ehen you've given the previous owner your old case aswell. A standard WT case is worth atleast $100, correct?

auszookers.com https://auszookers.com/forum/

Selling/swapping 1L transfer case (with switch) https://auszookers.com/forum/viewtopic.php?f=7&t=32141	Page 1 of 1

Author:	masterA [ Fri Apr 27, 2012 8:14 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
Thanks for the info and your opinions....taken aboard You need to keep in mind that most of you live over east and your parts are twice as cheap....just like your cars FYI....a couple of adds here in WA for stock t/cases....both are asking $400 (another $350) so i though $280 was a reasonable price to exhcange a stock one for a 1L with a switch http://www.gumtree.com.au/s-ad/duncraig ... /357400329 http://www.gumtree.com.au/s-ad/ballajur ... /340465178 http://www.gumtree.com.au/s-ad/gosnells ... 1000720299 mrw82 - I know i can put gears in a 1L case but some people that run smaller tyres are happy to have a 1L case. I figured that this could be a cheaper option for them to get some reduction and in turn since im going to buy gears, it'll save me some money also

Author:	masterA [ Fri Apr 27, 2012 8:18 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
ZookiMonsta wrote: IMHO thats alot to pay for a 1L case as well swapping a standard case. I paid $400 for a case with reduction gears fitted aswell as swapping a standard case and reduction gears & fitting cost ALOT more than a 1L case. Just my 2c mate. Im looking to get 5.14 reduction gears so if you come accross a t/case with them fitted i'll be more than happy to pay you $400

Author:	sogone [ Sat Apr 28, 2012 2:05 am ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
IMHO I don't believe that distance should be a factor. I regularly freight wheels (tanshi), gearboxes-transfers (jas), almost whole half cuts (pj.zook). Freight costs next to nothing these days. It wouldn't be more then $50 to get a transfer case freighted from Brisbane to Perth and vise versa.

Author:	alien [ Sat Apr 28, 2012 5:06 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
mrw82 wrote: tanshi wrote: generally 1 litre switch cases go for around $200 just fyi That's on a good day..... You can fit reduction gears to your 1 litre switched case. dont forget we're in WA - anything for a sierra costs double here.

Author:	masterA [ Wed May 23, 2012 1:34 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
BUMP

Author:	murph51 [ Wed May 23, 2012 10:10 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
swap my 1.3l transfer for your 1l transfer, done

Author:	ando_zook94 [ Thu May 24, 2012 8:58 am ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
murph51 wrote: swap my 1.3l transfer for your 1l transfer, done you douche

Author:	murph51 [ Thu May 24, 2012 10:12 am ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
he wants a 1.3.. and i want a 1L.. straight swap.. easy as pie

Author:	zukmeista [ Thu May 24, 2012 10:20 am ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
murph51 wrote: he wants a 1.3.. and i want a 1L.. straight swap.. easy as pie Your 1.3 case is worth 3/5's of fuck-all. 1l cases are getting pretty rare these days and hence are worth a lot more. He stated in his first post that he wanted $280 AS WELL AS A 1.3 CASE. Read properly before posting

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	sogone [ Thu May 24, 2012 11:53 am ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
Your a troll. 1.3 cases regularly sell for $150 on here. Want33's sells them for $150.

Author:	303zuke [ Thu May 24, 2012 12:29 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
mrw82 wrote: You can fit reduction gears to your 1 litre switched case. You can, but only 6.5s will provide the complete set of gears for the swap. If he wants 4.16, 4.9 or 5.14s, he will need ONE gear from a 1.3 transfer. May as well start with a 1.3 case.

Author:	Fatzook [ Thu May 24, 2012 12:31 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
Problem is, Murph owns a coily, which makes his 1.3 case worth $5.

Author:	sogone [ Thu May 24, 2012 1:10 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
Hahaha. And bang Goes the dinamite.

Author:	zukmeista [ Thu May 24, 2012 1:38 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
sogone wrote: Hahaha. And bang Goes the dinamite. Told you!:thefinger:

Author:	murph51 [ Thu May 24, 2012 10:47 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
i just wanna be a real boy :'(

Author:	masterA [ Wed Jun 13, 2012 4:56 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
303zuke wrote: mrw82 wrote: You can fit reduction gears to your 1 litre switched case. You can, but only 6.5s will provide the complete set of gears for the swap. If he wants 4.16, 4.9 or 5.14s, he will need ONE gear from a 1.3 transfer. May as well start with a 1.3 case. Another reason why i want the 1.3 case I did the 4.9 into my tintop (and had to use one of the gears) and now i want to get some 5.14s for the ute On the weekend i pulled out the 1L case out of the ute and swapped it out with my 4.9s from the tintop to see if it'll be good enough or if i should get the 5.14s Anyway....long story short.....the bloke i brought the car off said it was a 1L case so i took his word for it but when i took them both out....they look bloody identical!!!! How do you tell the difference between a 1L case and a 1.3?

Author:	sideways [ Wed Jun 13, 2012 8:29 pm ]
Post subject:	Re: Selling/swapping 1L transfer case (with switch)
masterA wrote: 303zuke wrote: mrw82 wrote: You can fit reduction gears to your 1 litre switched case. You can, but only 6.5s will provide the complete set of gears for the swap. If he wants 4.16, 4.9 or 5.14s, he will need ONE gear from a 1.3 transfer. May as well start with a 1.3 case. Another reason why i want the 1.3 case I did the 4.9 into my tintop (and had to use one of the gears) and now i want to get some 5.14s for the ute On the weekend i pulled out the 1L case out of the ute and swapped it out with my 4.9s from the tintop to see if it'll be good enough or if i should get the 5.14s Anyway....long story short.....the bloke i brought the car off said it was a 1L case so i took his word for it but when i took them both out....they look bloody identical!!!! How do you tell the difference between a 1L case and a 1.3? Cases with the switch are identical. Put them in low and count the rotations.