auszookers.com
https://auszookers.com/forum/

'85 Sierra, 1.6L, SPOA, 33's, Engineers *SOLD- Please delete
https://auszookers.com/forum/viewtopic.php?f=7&t=33171		 Page 1 of 2
Author:  MLU [ Mon Jun 04, 2012 8:31 pm ]
Post subject:  '85 Sierra, 1.6L, SPOA, 33's, Engineers *SOLD- Please delete
'85 Shorty Hardtop Sierra - Valid Engineering Cert (Victoria), Currently Unregistered & Garaged
Paint: Ford Phantom Purple (code:P3)
Engine has approx 20,000km's on it

***Update (24/08/12)*** SOLD **
Build cost me over $18k in parts, labour & paint on top of the initial vehicle purchase
Interstate buyers welcome to enquire also.

Fitted with;

1.6L MPFI Vitara Motor
1.6L 5sp Vit Gearbox
1.3L Sierra & 1.6L Vit transfer (custom dual t-case setup)
5.11 Vit centers with ARB Air Lockers f&r
Widetrack Sierra front housing & Vitara rear housing
SPOA conv, 3 link rear (anti-wrap bar), std. sierra leaves front & rear
2.5" Body Lift
OME shocks
65L Brown Davis Long Range Fuel Tank w/ surge pot
Vitara power steer, high steer drag links (above the leaves)
Rear disc conv.
Vitara Aluminium Radiator
Pass. side stainless snorkel w/ Safari Head and optional Dust Bowl Head
ARB winch bar
4,500lb low mount Warn Winch (hard wired in-dash control)
TJ Flares f&r with genuine flush mount indicator lenses
Currently sitting on 33x12.5xr16 Silverstone Sports (95% tread) on Silver/Grey powdercoated Eastern Wheel Works 16x8 1" offset rims incl spare wheel
Also comes with a set of 5x 31x10.5xr15 Silverstone SQ773's (60% tread) on White Sunraysier Rims
Blue Tongue IV compressor with dedicated locker reservoir, integrated pressure gauge, air hose outlet (Nitto fittings) & 5m air hose w/ tyre valve fitting
Dual Battery setup w/ Redarc Solenoid (2nd Battery behind passenger seat bolted to the floor in a battery box)
Autotechnica Monza Race Seats both sides, back seat has been removed.
Pop-up style Floor Drains (very handy to 'drain the tub'...)

As a deal sweetener, I also have 2x 4pt OMP harnesses never used still in their boxes if you wished to go the extra mile and fit a cage

Please either PM me or post your queries or to arrange an inspection.
Vehicle located in Eastern Suburbs Melbourne. Please note, only the standard plates come with it if you wish to re-register the vehicle with them.
Thanks for looking- hope you like what you see!

Image
Image
Image
Image
Vitara 1.6L MPFI fitted
Image
With 31's fitted a few years back
Image
Author:  superzooker [ Mon Jun 11, 2012 11:34 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
PM'd you mate!
Author:  superzooker [ Mon Jun 11, 2012 11:46 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Also why are you selling?
Author:  Brenno [ Mon Jun 11, 2012 6:37 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Looks like an original joeblow creation?
Author:  MLU [ Tue Jun 12, 2012 10:47 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Hi superzooker, got your PM and have replied. In answer to your question, I have a little person on the scene now and need to focus my attention on him. Plus most of my mates that used to go wheelin' don't anymore for similar reasons- lack of time. =(
Author:  MLU [ Tue Jun 12, 2012 10:50 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Brenno wrote:
Looks like an original joeblow creation?


Hi Brenno, yup- Joe built this one about 7 years ago. Great little truck, just no time to use it much these days!
Author:  danw [ Wed Jun 13, 2012 5:20 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Would you want to get rid of the harneses separately mate? How much if so.
Author:  MLU [ Wed Jun 13, 2012 6:10 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
danw wrote:
Would you want to get rid of the harneses separately mate? How much if so.


If a potential buyer of the zook has no need/interest in utilizing them, I'll be sure to flick you a PM Dan.

Cheers, Mike. :)
Author:  hegs218 [ Thu Jun 14, 2012 7:09 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
hey mate bit of a silly question but what would u need for a RWC to get it reg'ed in vic
Author:  MLU [ Thu Jun 14, 2012 8:57 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
hegs218 wrote:
hey mate bit of a silly question but what would u need for a RWC to get it reg'ed in vic


Hi Hegs,

Not that I've had it assessed for RWC recently, but you'd need to put the 31's on for the inspection as that's what it's technically allowed to have on the road.
The overall weight on the weigh bridge may require the front bar/winch to come off to meet the criteria- just a standard sierra bumper would pass.
Windscreen is fine (no chips or 'sandblasted'), but they may pick that if they want to be difficult.
Apart from that, I'm not a RWC assessor so that's all I can think of to answer your question. The mods have an engineers cert to allow it to pass for those.

Happy for you to have a look one evening or over the weekend if you wish to.

Cheers, Mike.
Author:  hegs218 [ Thu Jun 14, 2012 11:03 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Ahhh very understandable.
You have a quality name i'm a mike also !
I will look into the finances tonight and get back to you on weather i can come have a look.
( I Don't like to waste a blokes time )
If you could pm me your number that would be great and ill get back to you tomorrow =]

Cheers
Author:  MLU [ Thu Jun 14, 2012 4:03 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
hegs218 wrote:
Ahhh very understandable.
You have a quality name i'm a mike also !
I will look into the finances tonight and get back to you on weather i can come have a look.
( I Don't like to waste a blokes time )
If you could pm me your number that would be great and ill get back to you tomorrow =]

Cheers


Hi Mike,

Haha- yeah, top name aye.. 8)
Cool, sounds good- thanks for the anti 'tyre kicker' veiwpoint.
I've PM'd you my details, hear from you tomorrow hopefully.

Cheers, Mike.
Author:  danw [ Thu Jun 14, 2012 5:29 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Thanks mike. Can yo let me know either way if possible??
Author:  MLU [ Thu Jun 14, 2012 5:46 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
danw wrote:
Thanks mike. Can yo let me know either way if possible??


Will do Dan, no probs at all!
Author:  sjb-85 [ Sat Jun 16, 2012 2:50 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Can I just ask where did you get your engineers cert done? Name of business, location and a contact details if you don't mind please, car looks mint mate g/l with sale
Author:  MLU [ Sat Jun 16, 2012 3:03 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
sjb-85 wrote:
Can I just ask where did you get your engineers cert done? Name of business, location and a contact details if you don't mind please, car looks mint mate g/l with sale


PM'd you Engineers's details, not sure if he still trades as mine was issued in 2005. Worth a look into though.
Author:  MLU [ Mon Jun 18, 2012 9:55 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Hi Mike (Hegs),

Just realised I PM'd myself somehow last week instead of responding to you... bit embarassing really!
Hope to hear from you soon ;)

Cheers, Mike.
Author:  hegs218 [ Thu Jun 21, 2012 1:18 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
you have a pm MLU
Author:  MLU [ Tue Jun 26, 2012 9:08 am ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Hi Mike (Hegs),

Responded on the weekend to your PM, good luck with the new job tomorrow!

Cheers, Mike.
Author:  MLU [ Mon Jul 02, 2012 10:34 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Bump... Going to list elsewhere as of tomorrow, anyone genuinely interested from AZ I'll consider a slight reduction in price for my beloved truck to go to a good home :mrgreen:
Author:  MLU [ Sun Jul 08, 2012 4:45 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Near offers consid
***Update (08/07/12)*** Now considering reasonable near offers for the zook to go to the right home**
Author:  rhyso.g [ Mon Jul 09, 2012 8:01 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Near offers consid
hey mate this beast for sale? im lookin for a zook atm n registered to look for advice n saw urs for sale, iv got $$$ n im out your way by the sounds of it im from the yarra valley il pm ya
Author:  MLU [ Tue Jul 10, 2012 6:57 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Near offers consid
Bump 8)
Author:  MLU [ Wed Jul 11, 2012 10:16 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Armsup Bump Armsup
Author:  MLU [ Tue Jul 17, 2012 5:13 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Near offers consid
rhyso.g wrote:
hey mate this beast for sale? im lookin for a zook atm n registered to look for advice n saw urs for sale, iv got $$$ n im out your way by the sounds of it im from the yarra valley il pm ya


Hi Rhys,

Still for sale, PM or ring me if you want to make a time to have a look mate.

Cheers, Mike. :D
Author:  MLU [ Thu Jul 26, 2012 9:15 pm ]
Post subject:  Re: '85 Sierra Hardtop, 1.6L, SPOA, 33's, Engineers Cert (Vi
Bump>>> :mrgreen:
Author:  MLU [ Wed Aug 01, 2012 8:30 pm ]
Post subject:  Re: '85 Sierra, 1.6L, SPOA, 33's, Engineers (Vic) *Price red
Update 01/08/12: Price reduction $9250 ONO :mrgreen:
Author:  shiv [ Fri Aug 03, 2012 9:34 am ]
Post subject:  Re: '85 Sierra, 1.6L, SPOA, 33's, Engineers (Vic) *Price red
Victoria is so far away thou :(

could i trouble you for more pics? (inside, other 4wd shots of it in action)

What would be need for it to pass a blue slip in NSW?
Author:  MLU [ Fri Aug 03, 2012 5:06 pm ]
Post subject:  Re: '85 Sierra, 1.6L, SPOA, 33's, Engineers (Vic) *Price red
Hi Shiv,

Sending you a PM with link to extra pics.
I'm unsure what the requirements are for a Blue Slip up in NSW. Maybe one of the new south boys could comment on that?
I know down here, you'd need the 31's on and take the front bar/winch off temporarily and put a std sierra bumper on for the weigh bridge to get re-reg.

Cheers, Mike :D
Author:  MLU [ Wed Aug 15, 2012 7:21 am ]
Post subject:  Re: '85 Sierra, 1.6L, SPOA, 33's, Engineers (Vic) *Price red
Bump :mrgreen:
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/