| Author |
Message |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Tue Jun 19, 2012 12:07 pm |
|
|
3 diffs for sale here:-
a) Wide track diff, 3.9 NT diff gears in it with 26 spline side gears. WT flange. Spartan locker is installed in this diff. $280 for the above, can freight auswide, located in mildura. (SOLD)
B) I also have a WT front diff + WT rear diff, these are not locked, standard in every way as far as I know. There is a wide track diff housing too, NT spaced, you can have this with either of the above diffs (save you some time welding on new perches!) 4 wheels with road tyres on them, 3 wheels are the same, one was a spare, it has a different offset, looks like it may be 3 sunraysias and a drover wheel...$400 (will seperate, IE you can take the wheels, 1 diff, 2 diffs, the spare housing, or the whole lot but wont dismantle diffs for axles, centres etc)
Had planned to convert my NT to WT, selling the sierra now so no use for the diffs. Will add pics if required, the tyres are good, 3 are the same one was clearly a spare.
4AGZE high top drover to be listed soon, would like to think I can get $6K for it which is what all the parts cost for the conversion.
Last edited by oldcob on Mon Jun 25, 2012 8:24 am, edited 3 times in total.
|
|
|
|
 |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Tue Jun 19, 2012 12:56 pm |
|
|
mate if you wanted to part with some rear WT axles I would definitely grab them
|
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Tue Jun 19, 2012 1:00 pm |
|
|
hoping to get rid of the diffs complete for someone wanting to convert their NT.
|
|
|
|
 |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Tue Jun 19, 2012 3:31 pm |
|
|
fair enough mate, im doing that but only need the rear axles all good, thanks
|
|
|
|
 |
angryanglia
Joined: Wed Jul 06, 2011 7:03 am Posts: 55 Location: Bayswater Victoria
|
 Posted: Wed Jun 20, 2012 12:48 pm |
|
|
Hello Mate, Would you sell the the diff centre with the locker? Thanks Tim
|
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Wed Jun 20, 2012 12:52 pm |
|
|
I would, but it would be the same price. The lockers are $200 new anyway.
|
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Thu Jun 21, 2012 9:14 am |
|
|
can anyone tell me if the NT and WT diff centres are interchangeable?
@ Shansh, angryanglia asked about the centre on its own, if he takes that then you can have the axles as long as between you I get $280.
Thanks
|
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Thu Jun 21, 2012 9:25 am |
|
|
They are but nt is 3.9 and wt is 3.7 so you'll need to get them to match front and rear
|
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Thu Jun 21, 2012 9:28 am |
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Sun Jun 24, 2012 7:29 pm |
|
|
|
 |
4x4xzook
Joined: Wed May 16, 2012 8:41 am Posts: 730 Location: Melbourne
Vehicle: MG410 Gypsy
|
 Posted: Mon Jun 25, 2012 8:22 am |
|
|
did u end up selling the diff with the spartan locker in it?
|
|
|
|
 |
oldcob
Joined: Wed May 05, 2010 9:00 am Posts: 86 Location: mildura VIC
|
 Posted: Mon Jun 25, 2012 8:24 am |
|
|
sold, have only the standard WT diffs left and wheels
|
|
|
|
 |
|