auszookers.com
https://auszookers.com/forum/

[ACT/NSW] Sierra, Vitara, Jimny Parts - updated 05/11/12
https://auszookers.com/forum/viewtopic.php?f=7&t=33665		 Page 1 of 4
Author:  stockman [ Mon Jun 25, 2012 5:14 pm ]
Post subject:  [ACT/NSW] Sierra, Vitara, Jimny Parts - updated 05/11/12
I have load of parts. If it's not listed PM me.


Sierra bonnet - white - $50
Sierra soft top rear door - white - $50
Sierra soft top hoops - X2 - $40ea
Sierra rear seat - 1 piece - $50
Sierra 1.3 brown dash - no cluster - $30
Vitara stock wheels - x4 60% tread - $50
Jimny doors - blue, inc glass - $150 pair
Jimny rear door - blue inc glass - $100
Sierra soft top spare wheel holder - good condish - $30
Jimny hand brake cup holder - good - $50
Jimny rear diff - 1999 108,000km's complete drum to drum - $300
Jimny front seats - pair - $100
Jimny rear seats - pair - $75
Jimny RHF guard - blue - $50
Jimny flares - blue - $40 each
Sierra 1.3 motor - low k's, good strong motor, complete with loom and all accessories - $450 SOLD
Sierra motor - runs but suit rebuild, short motor - $75
Sierra 1.3 carby - came off good running car - $100 back forsale
Sierra 1.3 inlet manifold - good - $20
Sierra 1.3 extractors - good - $60
Lot's of carby parts
Sierra 1.3 dizzys - x2 - $35ea
Sierra alt - unknown condition - $10
Sierra transfer case mounts - x12 - $5ea

Image
Image
Image
Image




Wrecking 1999 Jimny, Low k's
Image
Image
Image
Image
Image
Image
Image
Image

NO MOTOR, LOOM, ECU, HARNESS OR CLUSTER.



1L diffs, front and rear with springs
$100
Image
Author:  abclarke [ Mon Jun 25, 2012 5:40 pm ]
Post subject:  Re: [ACT] Sierra parts
PM sent about bar :)
Author:  Zook_Fan [ Mon Jun 25, 2012 6:26 pm ]
Post subject:  Re: [ACT] Sierra parts
Pics of the momo wheel?
Author:  stockman [ Mon Jun 25, 2012 6:37 pm ]
Post subject:  Re: [ACT] Sierra parts
A few have asked for pics of the bar:

BOTH ARB BARS HAVE SOLD
Author:  zooktastic [ Mon Jun 25, 2012 7:41 pm ]
Post subject:  Re: [ACT] Sierra parts
pm sent for gears
Author:  abclarke [ Mon Jun 25, 2012 8:22 pm ]
Post subject:  Re: [ACT] Sierra parts
Money sent for bar ;)
Author:  Ratty562 [ Mon Jun 25, 2012 10:45 pm ]
Post subject:  Re: [ACT] Sierra parts
Does the jimny bolt straight to the sierra gearbox ?
Author:  sogone [ Tue Jun 26, 2012 6:49 am ]
Post subject:  Re: [ACT] Sierra parts
What's the sag like in the kings springs?
Author:  stockman [ Tue Jun 26, 2012 7:07 am ]
Post subject:  Re: [ACT] Sierra parts
Ratty562 wrote:
Does the jimny bolt straight to the sierra gearbox ?


No. Mseries is different to gseries

sogone wrote:
What's the sag like in the kings springs?


Even from memory
Author:  sogone [ Tue Jun 26, 2012 2:50 pm ]
Post subject:  Re: [ACT] Sierra parts
How old are they? Would they e better then 4 year old flogged out Efs springs?Happy to freight?
Author:  4x4xzook [ Tue Jun 26, 2012 4:38 pm ]
Post subject:  Re: [ACT] Sierra parts - lots and lots of stuff
So mich i would buy!!! Ur not coming melbourne wat at all?? Haha
Author:  stockman [ Tue Jun 26, 2012 5:30 pm ]
Post subject:  Re: [ACT] Sierra parts - lots and lots of stuff
sogone wrote:
How old are they? Would they e better then 4 year old flogged out Efs springs?Happy to freight?


Nah there hardly used for what I can tell about the car. The chassis has been sitting on stands for the few months I have had it, so no load on the springs.
No postage, to big for the little time I have.

4x4xzook wrote:
So mich i would buy!!! Ur not coming melbourne wat at all?? Haha


Do a road trip.
Author:  fully sick coily [ Tue Jun 26, 2012 6:02 pm ]
Post subject:  Re: [ACT] Sierra parts - lots and lots of stuff
any pics of the momo wheel?
Author:  stockman [ Tue Jun 26, 2012 6:05 pm ]
Post subject:  Re: [ACT] Sierra parts - lots and lots of stuff
fully sick coily wrote:
any pics of the momo wheel?


Like I said: Pics of wheel tomorrow :roll:


Tomorrow. :oops:


Forgot today.


Tomorrow.


OK?


Bye.
Author:  stockman [ Tue Jun 26, 2012 6:22 pm ]
Post subject:  Re: [ACT] Sierra parts - lots and lots of stuff
Here you go.

Image
Author:  Locks [ Wed Jun 27, 2012 2:34 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
PM(s) sent regarding a soft top + hoop and the seats.

Thanks
Author:  jackoliveshere [ Wed Jun 27, 2012 6:43 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
hey man have u got pics of your soft tops?
Author:  C.00.K13 [ Wed Jun 27, 2012 6:51 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Where r u located and are the extractor of a g13bb/jimny motor
Author:  Shandy [ Thu Jun 28, 2012 5:10 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Pm,ed
Author:  stockman [ Thu Jun 28, 2012 5:33 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Didn't get one from you shandy.
Author:  dion93 [ Thu Jun 28, 2012 5:35 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
pm'd about alternator
Author:  jim_dover [ Thu Jun 28, 2012 6:03 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
PM'ED
Author:  atari4x4 [ Thu Jun 28, 2012 6:04 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
got any bonnets spair?
Author:  stockman [ Thu Jun 28, 2012 6:19 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
haha no spair bonnets left. Timbo has one, its sitting next to his wince.
Author:  SierraDan [ Thu Jun 28, 2012 6:52 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
OI.
Mr Simbo, will a "Suzuki" grill fit my "S" front clip? I need to chop mine to suit the dive nose and the S one won't work :(
Author:  appsie [ Thu Jun 28, 2012 7:00 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
should clip in the same yes dan if thats what you meant?
Author:  SierraDan [ Thu Jun 28, 2012 7:14 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Yeah that's what I meant. Sweet thanks :D

Will you post Simbo? :)
Author:  stockman [ Thu Jun 28, 2012 9:31 pm ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Pretty sure they screw up the same.
Maybe too plasticy to post?
I can bring it up to the Sydney trip?
Author:  SierraDan [ Fri Jun 29, 2012 6:54 am ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
Just needs to clip in, I don't remember if my screw in brackets are in 80mm or not anyway..

Hmm.. What if I post you some wood like they do with gaskets? :lol:
Author:  BlueSuzy [ Fri Jun 29, 2012 9:19 am ]
Post subject:  Re: [ACT/NSW] Sierra parts - lots and lots of stuff
I have a spair red gill if u wnt an dan.

91' 1.3 suzuki Red or blue
Page 1 of 4 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/