| auszookers.com https://auszookers.com/forum/ |
|
| Moving in with Stekky sale - more added! https://auszookers.com/forum/viewtopic.php?f=7&t=34802 |
Page 1 of 1 |
| Author: | Damo [ Wed Aug 08, 2012 2:29 pm ] |
| Post subject: | Moving in with Stekky sale - more added! |
Kidding but I am getting rid of some stuff just like he did!!!Pickup by end of this weekend!!! eg, Sun 12th Aug!!! Pls PM, or call/sms 0414 402 957 if you need something urgent. PLEASE NOTE I also have a couple of milk crates Engine stand. Has wheels, 1 person moves it. Mock up brackets, manifolds, engine mounts etc, built from WT chassis section, block & g/box not included but available. $50 ONO SOLD ![]() R31 Skyline/Pintara calipers. Suits Joeblow's rear disc conversion. In good condition. $100 ONO ![]() AU alternator. Not the easy one we use for conversions. $10 ![]() NT passenger seat mount. Average condition. $10 ![]() Flywheel and Centreforce clutch. $50Clutch SOLD, flywheel still available[/b] ![]() ![]() ![]() Sierra inlet mani. $20 ![]() Sierra NT shortside CV and axle SOLDSOLD[/b] ![]() GTI parts. Head, block, crank, inlet mani $75 ONO SOLDSOLD[/b] ![]() ![]() ![]() ![]() Eaton M45 supercharger. Cut and milled ready for inlet flange of your choice. $300SOLD[/b] ![]() ![]() ![]() G13 short block. For parts. $20 ![]() CBR1100RR ITBs. TPS is broken. Includes 4 filters as per pic. $200 ONO ![]() ![]() ![]() ![]() Sierra A/C evaporator unit + loom. $100 ONOSOLD[/b] ![]() WT chassis rear section. $50 ONO ![]() Splitfire transmission temp gauge. Mechanical not electric, never used $30 ![]() G16a exhaust manifold. No cracks/leaks that I can see $25 ![]() Bolt up 6 stud Hilux/Patrol/Cruiser rims to your zook!!! These are from some JDM model zook that runs 6x5.5 PCD rims from factory. Hubs, rotors and drums included $100 ![]() Anyone got a tow truck? Thomas winch. Heavy and slow, but after WW3 there will be cockraoches and these winches left. It is on the heavy side but heavy = reliable and if it does die you can winch with the included crank handle! (have fun with that btw). It's quite weighty and this one doesn't have free spool, but a lot of parts interchange between models. Even though these are heavy they do also come as PTO and and i've seen them set up with hydraulics. Despite the weight and looking sad but it's all there, motor needs some love, or maybe just a new motor. Solenoid pack is there too. $50. Oh, did I mention it weighs a metric arse-ton? ![]() Vit driveshaft. Boots look OK, 26 spline end is rusty & pitted, 22 spline end is fine $10 ![]() Shopping trolley. Not to be mistaken for GV. Good for swap meets or taking your Nan to Coles $10
|
|
| Author: | whincup [ Wed Aug 08, 2012 2:43 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
what sierra is the AC to suit? WT/NT? |
|
| Author: | Damo [ Wed Aug 08, 2012 3:53 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
A/C is out of a WT. |
|
| Author: | Tyron [ Wed Aug 08, 2012 4:02 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Damo wrote: A/C is out of a WT. how much effort is installing an ac unit? Also do you have any tie rod ends? |
|
| Author: | atari4x4 [ Wed Aug 08, 2012 4:10 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
i say ban him for misleading thread title.
|
|
| Author: | Damo [ Wed Aug 08, 2012 4:15 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Tyron wrote: Damo wrote: A/C is out of a WT. how much effort is installing an ac unit? Also do you have any tie rod ends? I've never istalled one but it doesn't look too hard. You will need someone to gass it though, plus you'll need the compressor and lines, condensor unit and reciever drier. This isn't the full setup, just the wiring loom and evap. unit. Sorry, no TREs.. |
|
| Author: | Damo [ Wed Aug 08, 2012 4:17 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
atari4x4 wrote: i say ban him for misleading thread title. ![]() Ban me as soon as my stuff is sold BTW, J20 + ITBs = win |
|
| Author: | Bruce [ Wed Aug 08, 2012 5:11 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Price on the NT CV and axle please. |
|
| Author: | Scrawny [ Wed Aug 08, 2012 6:03 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Mmmmmmm...... supercharger!!!! |
|
| Author: | Rusho [ Wed Aug 08, 2012 6:17 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Scrawn wrote: Mmmmmmm...... supercharger!!!! Absofuckinlutely |
|
| Author: | 96coily [ Wed Aug 08, 2012 8:30 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
I thought he was selling his soul |
|
| Author: | jim_dover [ Wed Aug 08, 2012 8:31 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
PM'ED |
|
| Author: | monley [ Wed Aug 08, 2012 9:21 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Will you post the calipers to WA........please? |
|
| Author: | jimbo_jones [ Wed Aug 08, 2012 10:01 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
Ill grab the n/t seat mount ifn you post to 2506 nsw? |
|
| Author: | Damo [ Wed Aug 08, 2012 10:04 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
96coily wrote: I thought he was selling his soul Sold already, gotta be quick 'round here mate Monley, Jimbo, I will have to get postage costs for you. Will PM you both tomorrow with some figures. |
|
| Author: | jimbo_jones [ Wed Aug 08, 2012 10:04 pm ] |
| Post subject: | Re: Moving in with Stekky sale |
thanks |
|
| Author: | jonno_racing [ Thu Aug 09, 2012 1:25 am ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
pm sent |
|
| Author: | Damo [ Thu Aug 09, 2012 9:07 am ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
All PMs replied |
|
| Author: | Damo [ Sat Aug 11, 2012 11:38 am ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
PMs replied. Jimbo i'm still trying to find a box for yours, will let you know as soon as I can. |
|
| Author: | Fatzook [ Sun Aug 12, 2012 2:19 pm ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
Damo wrote: All PMs replied Not so. I'm still waiting. |
|
| Author: | dono1 [ Sun Aug 12, 2012 4:52 pm ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
In your milk crates of assorted goodies do you have the pulleys required for a falcon alt conversion? If so how much posted to NSW 2446! |
|
| Author: | Damo [ Sun Aug 12, 2012 6:01 pm ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
dono1 wrote: In your milk crates of assorted goodies do you have the pulleys required for a falcon alt conversion? If so how much posted to NSW 2446! What pulleys are you after? I didn't think the falcon alt. swap needed any pulleys? Hang on, unless you're not running a micro v-belt setup... have you got a normal v-belt? I can have a look and see if I have something that works. |
|
| Author: | dono1 [ Sun Aug 12, 2012 9:06 pm ] |
| Post subject: | Re: Moving in with Stekky sale - more added! |
I thought you needed to change to a multi rib setup to fit it on a sierra? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|