auszookers.com
https://auszookers.com/forum/

Vitara bashplate now sold
https://auszookers.com/forum/viewtopic.php?f=7&t=35413		 Page 1 of 1
Author:  Kane [ Sat Sep 01, 2012 7:30 pm ]
Post subject:  Vitara bashplate now sold
Hi,

I have for sale a very strong bashplate for a vitara. Also has a transfer case plate too, and a RTC dampener. I brought these (second hand from someone on this forum) 18 months ago with the intention os installing but just didn't get around to it and I am not really getting out as much.

So looking for $150. I am in Canberra and they weigh a lot, so you can freight if you organise and pay.

You can see that they have been used previously and can take a fair hit, and that they still have dirt on them too..

Thanks

Kane

(edit: not going to Sydney this weekend)
Author:  stocker [ Sun Sep 02, 2012 9:13 am ]
Post subject:  Re: Vitara bashplate
you have a pm :)
Author:  Charlie Brown [ Sun Sep 02, 2012 11:51 am ]
Post subject:  Re: Vitara bashplate
do you have any pics of how the one sat over the transfer case? (on the other guys car?)
Author:  atari4x4 [ Sun Sep 02, 2012 11:52 am ]
Post subject:  Re: Vitara bashplate
if you don't take it stocker, i'm up for it. :wink:
Author:  Kane [ Sun Sep 02, 2012 3:04 pm ]
Post subject:  Re: Vitara bashplate
Stocker, I have replied.

Charlie, sorry i don't have any pictures of it installed. If it helps that little bit of metal above the transfer case plate is part of the install for it (i was told)

Atari, time will tell.
Author:  suzukiboy [ Sun Sep 02, 2012 3:50 pm ]
Post subject:  Re: Vitara bashplate
Looks like the Calmini one's/design.

The rear transfer case plate bolts to the gearbox plate (That is the way it does on mine).

Image
Image
Image
Author:  Charlie Brown [ Mon Sep 03, 2012 10:18 am ]
Post subject:  Re: Vitara bashplate
That looks sick got any pics of it on the front diff? :) thanks!
Author:  suzukiboy [ Mon Sep 03, 2012 6:22 pm ]
Post subject:  Re: Vitara bashplate
Image
Image
Image
Image
Author:  Bruce [ Mon Sep 03, 2012 6:28 pm ]
Post subject:  Re: Vitara bashplate
Mine you those photos must be at least 6 years old by now.
Author:  suzukiboy [ Mon Sep 03, 2012 6:41 pm ]
Post subject:  Re: Vitara bashplate
Bruce wrote:
Mine you those photos must be at least 6 years old by now.



You would be right there, here are the latest pics of the plates and there location.

Image
Image
Author:  atari4x4 [ Mon Sep 03, 2012 6:45 pm ]
Post subject:  Re: Vitara bashplate
:lol: barely a scratch on them... they look like it's never been used. :deadhorse:
Author:  zook_ute [ Mon Sep 03, 2012 7:07 pm ]
Post subject:  Re: Vitara bashplate
Who ever buys this gear should get a few sets remanafactured here in australia locally, im very keen to buy.
Author:  suzukiboy [ Mon Sep 03, 2012 7:31 pm ]
Post subject:  Re: Vitara bashplate
atari4x4 wrote:
:lol: barely a scratch on them... they look like it's never been used. :deadhorse:


The guys at work say the same thing, "do you ever your that ---------" cars, bikes, gadgets.
Author:  atari4x4 [ Mon Sep 03, 2012 7:37 pm ]
Post subject:  Re: Vitara bashplate
zook_ute wrote:
Who ever buys this gear should get a few sets remanafactured here in australia locally, im very keen to buy.


might want to run it past one of our website sponsors before you go ripping off their designs. :wink:
Author:  suzukiboy [ Mon Sep 03, 2012 7:38 pm ]
Post subject:  Re: Vitara bashplate
zook_ute wrote:
Who ever buys this gear should get a few sets remanafactured here in australia locally, im very keen to buy.


If someone is inspired by the Calmini design to make ones that are similar or better design didn't you mean.

Was also posting this at the same time as atari4x4.......................
Author:  Charlie Brown [ Tue Sep 04, 2012 7:54 am ]
Post subject:  Re: Vitara bashplate
thanks for those pics mate I'm thinking of fabricating the same sort of thing, pity I don't have the measurements of some of these!
Author:  suzukiboy [ Tue Sep 04, 2012 10:50 am ]
Post subject:  Re: Vitara bashplate
Sorry Kane about the thread highjack, as less the topic is at the top....

Charlie Brown, give me to the weekend and will take some measurements.

Cheers,
Dave
Author:  Kane [ Tue Sep 04, 2012 7:03 pm ]
Post subject:  Re: Vitara bashplate
suzukiboy wrote:
Sorry Kane about the thread highjack, as less the topic is at the top....

Charlie Brown, give me to the weekend and will take some measurements.

Cheers,
Dave


No worries, its the new way to bump your ad... :D
Author:  Charlie Brown [ Tue Sep 04, 2012 9:16 pm ]
Post subject:  Re: Vitara bashplate
yeah sorry too man =P thanks Suzuki boy!
Author:  Kane [ Thu Sep 06, 2012 10:14 pm ]
Post subject:  Re: Vitara bashplate
Have sent some PMs as the first person to ask me is no longer able to purchase the plates (they have to replace a head gasket instead!).
Author:  Kane [ Fri Sep 14, 2012 8:18 pm ]
Post subject:  Re: Vitara bashplate
sold pending payment
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/