tuffcoily wrote:
they are not flexy like buswhackers
Bushwackers are not 'flexy' in the slightest. They smash at the mere suggestion of impact. So these could be no worse than a bushwacker. ( may even be slightly better
)
| auszookers.com https://auszookers.com/forum/ |
|
| Black Plastic & fibreglass Flares https://auszookers.com/forum/viewtopic.php?f=7&t=36066 |
Page 1 of 1 |
| Author: | tuffcoily [ Mon Oct 01, 2012 4:15 pm ] |
| Post subject: | Black Plastic & fibreglass Flares |
Got some flares for my coily and got a few extra sets at the same time, 4 sets available they come black and are made from plastic they are not flexy like buswhackers but look and fit great for the price welcome to come and see them on my car and check them out. They are 95mm wide. Will fit leafy and coily $380 gold coast pickup preffered but can drop off to courier depot. |
|
| Author: | fully sick coily [ Mon Oct 01, 2012 4:58 pm ] |
| Post subject: | Re: Flares |
Pm sent |
|
| Author: | DarkHorse [ Mon Oct 01, 2012 5:22 pm ] |
| Post subject: | Re: Flares |
Been wondering how this style would look on a Vit... |
|
| Author: | Fatzook [ Mon Oct 01, 2012 7:45 pm ] |
| Post subject: | Re: Flares |
tuffcoily wrote: they are not flexy like buswhackers Bushwackers are not 'flexy' in the slightest. They smash at the mere suggestion of impact. So these could be no worse than a bushwacker. ( may even be slightly better )
|
|
| Author: | jesse_vit [ Tue Oct 02, 2012 3:48 pm ] |
| Post subject: | Re: Flares |
recon i could come and try a set against my vitara? |
|
| Author: | DarkHorse [ Tue Oct 02, 2012 4:11 pm ] |
| Post subject: | Re: Flares |
Take pics
|
|
| Author: | tuffcoily [ Tue Oct 02, 2012 4:14 pm ] |
| Post subject: | Re: Flares |
Yep just give me a call pm me if you don't have my number |
|
| Author: | tuffcoily [ Wed Oct 10, 2012 6:40 pm ] |
| Post subject: | Re: Black Plastic Flares |
Bump. |
|
| Author: | boost=money [ Wed Oct 10, 2012 7:41 pm ] |
| Post subject: | Re: Black Plastic Flares |
do u still have some of these? |
|
| Author: | tuffcoily [ Wed Oct 10, 2012 7:46 pm ] |
| Post subject: | Re: Black Plastic Flares |
3 sets left |
|
| Author: | got_bar_work [ Fri Oct 12, 2012 10:47 am ] |
| Post subject: | Re: Black Plastic Flares |
Wat about ur rear doors dark horse Cut in half |
|
| Author: | DarkHorse [ Fri Oct 12, 2012 11:06 am ] |
| Post subject: | Re: Black Plastic Flares |
Yeah, that was the thought. Hope the fuel lid lines up close enough. Not going to get around to it for months now anyway, was just a thought. |
|
| Author: | tuffcoily [ Sun Feb 03, 2013 8:13 am ] |
| Post subject: | Re: Black Plastic Flares |
Just got some more of these in needed spares for my coily have one set of plastic ones and two sets of fiberglass ones $380 for plastic ones $420 for fiberglass ones They are the same size and design as each other just different materials. |
|
| Author: | DarkHorse [ Wed Feb 06, 2013 10:11 pm ] |
| Post subject: | Re: Black Plastic Flares |
Did anyone get photos of these on a Vit? I'm getting fucken sick of tearing the plastics off the SV... |
|
| Author: | tuffcoily [ Thu Feb 07, 2013 5:19 am ] |
| Post subject: | Re: Black Plastic Flares |
No one put them on a Vit if you are tearing your current ones off then bigger ones will only be worse you are welcome to come and see if they can be made to fit. |
|
| Author: | kritas [ Thu Feb 07, 2013 7:59 am ] |
| Post subject: | Re: Black Plastic Flares |
I quite like these. Reckon a Safari Snorkel would still fit around these? Was going to get bushwhackers but they mount all the way up to the bonnet.... |
|
| Author: | tuffcoily [ Thu Feb 07, 2013 8:35 am ] |
| Post subject: | Re: Black Plastic Flares |
Would need to sit one on it and see or send me a pic of the snorkel on the car and I will see if it will |
|
| Author: | Xr6_matt [ Thu Feb 07, 2013 9:09 am ] |
| Post subject: | Re: Black Plastic Flares |
Where on the goldy are you mate? |
|
| Author: | tuffcoily [ Thu Feb 07, 2013 2:55 pm ] |
| Post subject: | Re: Black Plastic Flares |
Have pm'd you my number XR6 |
|
| Author: | oozuk [ Sat Feb 09, 2013 8:41 am ] |
| Post subject: | Re: Black Plastic Flares |
there nice looking flares |
|
| Author: | tuffcoily [ Wed Feb 27, 2013 11:45 am ] |
| Post subject: | Re: Black Plastic & fibreglass Flares |
Thanks Steve had them on the coily for a while now and they seem to be holding up ok after hitting the odd rock or tree. |
|
| Author: | Zak'stryin321 [ Fri Apr 12, 2013 11:01 am ] |
| Post subject: | Re: Black Plastic & fibreglass Flares |
Do you still have a set there mate? |
|
| Author: | tuffcoily [ Fri Apr 12, 2013 3:41 pm ] |
| Post subject: | Re: Black Plastic & fibreglass Flares |
Have one set left they are on ebay they finish tomorrow |
|
| Author: | Tyron [ Sat Apr 27, 2013 5:05 pm ] |
| Post subject: | Re: Black Plastic & fibreglass Flares |
I've got a set of these. Mine were all uneven. massive pain in the arse. How were your sets? |
|
| Author: | tuffcoily [ Sat Apr 27, 2013 6:17 pm ] |
| Post subject: | Re: Black Plastic & fibreglass Flares |
Which ones plastic of f/glass my plastic ones fitted pretty good the f/glass ones need need a little trimming because they are not as flexi |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|