auszookers.com
https://auszookers.com/forum/

Striping smashed 2001 jimny complete car
https://auszookers.com/forum/viewtopic.php?f=7&t=36138
Page 1 of 2

Author:  Stevo87 [ Thu Oct 04, 2012 2:28 pm ]
Post subject:  Striping smashed 2001 jimny complete car

As titled got a complete smashed jimny striping. Pm me parts needed
Located melb 3021

Author:  Stevo87 [ Thu Oct 04, 2012 7:31 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

It's got alloy side steps
Towbar
Fog lights
It's manual so got full manual conversion
G series motor in excellent condition
Pm me what you need

Author:  joeblow [ Thu Oct 04, 2012 8:00 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Radiator support panel.

LH inner guard.

Bonnet.

Roof lining.

Rear door.

Author:  Gough [ Thu Oct 04, 2012 8:23 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

how much for 2 door switches, arial, and left electric side mirror, if manual, the plastic clutch cover panel on the gear box and I live in Sydney, would this stuff fit onto a 99 jimny ?

Author:  watermouse [ Thu Oct 04, 2012 8:34 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Gough, If its a g13 engine jimny it is the same as the 99 model.

what are the kms on the motor? auto or manual?

Author:  Stevo87 [ Thu Oct 04, 2012 8:58 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

watermouse wrote:
Gough, If its a g13 engine jimny it is the same as the 99 model.

what are the kms on the motor? auto or manual?


It's the same as a 99
It's manual gearbox no noise or crunks
Motor has 180000kms no leaks or smoke ran good

Author:  Stevo87 [ Thu Oct 04, 2012 9:01 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

joeblow wrote:
Radiator support panel.

LH inner guard.

Bonnet.

Roof lining.

Rear door.

The car got smashed from behind and front and then rolled on passenger side
So lh inner gaurd and roof lining will be ok still

Author:  Stevo87 [ Thu Oct 04, 2012 9:03 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

I still haven't not bough the car from the insurance
I first want to make sure I got people intrested in parts so I can get my money back for what I purchase to get it back

Author:  Gough [ Thu Oct 04, 2012 9:09 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

thanks, so how much and how much for roof rails if in good condition ?

Author:  Stevo87 [ Thu Oct 04, 2012 9:22 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Complete motor with out p/s pump, with gearbox, clutch, flywheel, starter motor and roof rails $800 lot

Author:  Macca52 [ Thu Oct 04, 2012 10:21 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Will you separate the gearbox and how much?
Macca

Author:  TWINCAM16 [ Fri Oct 05, 2012 3:36 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

how much for whatever you have left of the power steering?

Author:  Jimny1 [ Fri Oct 05, 2012 4:24 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Towbar straight or bent if its straight I will have it thanks.

Author:  Jimny1 [ Fri Oct 05, 2012 4:27 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Is the drivers seat in good order?? I need one of these also. How much??

Author:  Stevo87 [ Fri Oct 05, 2012 7:24 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

I'll update use in couple of days. I guess I can make my money back so I might aswell buy it

Author:  bigdogdazza [ Sat Oct 06, 2012 5:53 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Complete power steer set up inc pulleys,pump brackets... Everything needed.

Author:  TWINCAM16 [ Sat Oct 06, 2012 4:20 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

sorry bigdogdazza, scroll up mate, i got dibbs on that one!!! allready pm'd him

Author:  bigdogdazza [ Sun Oct 07, 2012 7:36 am ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Gotta try! Lol

Author:  remydog05 [ Mon Oct 08, 2012 7:55 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Engine, ECU, Loom etc for conversion??

Author:  Creamcheese [ Tue Oct 09, 2012 5:19 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Airbox and associated plumbing.

PM Sent

Author:  Stevo87 [ Wed Oct 10, 2012 4:14 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Will know if I'm getting the car by Monday.

Author:  TWINCAM16 [ Wed Oct 10, 2012 7:37 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

sweet cheers stevo looking forwards to hearing from u

Author:  Bugsta [ Wed Oct 10, 2012 10:05 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

PM sent

Author:  Stevo87 [ Thu Oct 11, 2012 3:22 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Ok we'll I'm picking up the car tomorrow. So people that are in melb can come get what they need. My contact number is 0423450227. So ring us if intrested in parts

Author:  Jimny1 [ Thu Oct 11, 2012 7:30 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

What sort of wheels and tyres are under it?? and what condition??

Author:  iambob [ Sat Oct 13, 2012 2:46 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Willing to post side steps??

Author:  Bugsta [ Sat Oct 13, 2012 2:50 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Interested in...
Rear Bumbstops
What brand and height springs
What brand and condition shocks
Any other aftermarket bits?

Author:  Stevo87 [ Sat Oct 13, 2012 5:15 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

It has stock suspension
Give us offers for the bumb stops

Author:  Stevo87 [ Sat Oct 13, 2012 5:19 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

Tow bar $200
Fog lamps $100
K&n filter done about 2000kms $50
Front disc done 1000kms $50

Author:  Stevo87 [ Sat Oct 13, 2012 5:20 pm ]
Post subject:  Re: Striping smashed 2001 jimny complete car

joeblow wrote:
Radiator support panel.

LH inner guard.

Bonnet.

Roof lining.

Rear door.


Got the radiator support if you want it

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/