auszookers.com
https://auszookers.com/forum/

LJ80 Bonnet
https://auszookers.com/forum/viewtopic.php?f=7&t=36548		 Page 1 of 1
Author:  buzbox [ Mon Oct 22, 2012 11:34 am ]
Post subject:  LJ80 Bonnet
There's an LJ80 at my local wreckers so I'm hoping that this bonnet can be recycled rather than crushed, even better if watermouse can get it to make fibreglass copies for the masses. nudge nudge ;) ;)

The other bad idea I had was to chop it up and frankenstein it onto an SJ bonnet, use it as a wall ornament or coffee table.

It is in fair to bad condition, but is probably the only salvagable panel on the wreck, It does have various rust holes and needs a fair bit of TLC

These are the photo's I have at the moment, I'll get better one's later if requested

Image

Image

Image

$40 is what I paid for it..
Author:  Joe [ Mon Oct 22, 2012 12:49 pm ]
Post subject:  Re: LJ70 Bonnet
LJ70 :?
Author:  shep [ Mon Oct 22, 2012 12:55 pm ]
Post subject:  Re: LJ70 Bonnet
Joe wrote:
LJ70 :?



X a metric crapload
Author:  tanshi [ Mon Oct 22, 2012 12:57 pm ]
Post subject:  Re: LJ70 Bonnet
LJ80 and verry very frucked
Author:  buzbox [ Mon Oct 22, 2012 1:37 pm ]
Post subject:  Re: LJ70 Bonnet
hahaha excuse my fat fingers, well in my defense, the 7 and 8 button are right next to each other. Or it could just be my LJ series noobness. :roll:

But yes, LJ80 and slightly very fucked.

Whaddya's rekon, frankenstein it onto an SJ bonnet ?? :lol:
Author:  atari4x4 [ Mon Oct 22, 2012 1:46 pm ]
Post subject:  Re: LJ80 Bonnet
Send it up to tony, pretty sure he's chasing a lj bonnet.
Author:  buzbox [ Mon Oct 22, 2012 1:54 pm ]
Post subject:  Re: LJ80 Bonnet
That's who I got it for, but LJ50 is what he's after. A bit like the SJ's, I thought that LJ's panels are pretty much all the same.

So up it go's on here before I either chop it up or take it back which then will most probably be crushed :(
Author:  sideways [ Mon Oct 22, 2012 3:47 pm ]
Post subject:  Re: LJ80 Bonnet
buzbox wrote:
That's who I got it for, but LJ50 is what he's after. A bit like the SJ's, I thought that LJ's panels are pretty much all the same.


Fwiw LJ80 and LJ50 bonnets are interchangeable, just the LJ50 ones look better.

Basically all LJ panels are different, but interchangeable. :lol:
Author:  Joe [ Mon Oct 22, 2012 6:24 pm ]
Post subject:  Re: LJ80 Bonnet
Turn it into a coffee table or part of a bar or something 8)
Author:  3cyl [ Mon Oct 22, 2012 7:14 pm ]
Post subject:  Re: LJ80 Bonnet
That would probably whistle at 80km/h
Author:  sideways [ Mon Oct 22, 2012 7:45 pm ]
Post subject:  Re: LJ80 Bonnet
3cyl wrote:
That would probably whistle at 80km/h


:lol:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/