| auszookers.com https://auszookers.com/forum/ |
|
| SOLD https://auszookers.com/forum/viewtopic.php?f=7&t=36557 |
Page 1 of 1 |
| Author: | S13RR4 [ Mon Oct 22, 2012 3:43 pm ] |
| Post subject: | SOLD |
Time has come to sell my sierra. Below is a list of everything that I could think of that I have done to it. Has been an excellent car for me for the past 4 years taking me everywhere I wanted to go on and off road but I have just accepted a permanent teaching position in Gatton and require a more comfortable/long distance 4wd. - New paint (stock sierra light blue colour with metallic paint flecks) (2 Years) - Chopped down bull bar with two spot lights - Tow bar - Replaced all panels on drivers side (2 years) o Door o Front quarter panel o Front and rear flare o B pillar/hoop o Windscreen surround and windscreen o Bonnet - Soft top is in good condition - Rear drawers - Racing Style Bucket seats - Sports steering wheel - Cup holders - 15 x 7 sunraiser rims (-13 offset) - 4 Decent GT Radial road tyres (215/70 R15) - Spare wheels o 205/75R15 on 15 x 5.5 standard sierra rim o 235/75R15 Federal Couragia (minimal tread) on 15 x 7 Sun raiser rim - 1L transfer case with 4wd switch (Reduced gear ratios for larger tyres) - New uni joints on rear drive shaft - New uni joints on transfer to gear box drive shaft - Rebuilt front hubs - Diff breather on front and rear diff into top of engine bay - 4 point roll bar - Bikini top - Original front seats with marine grade vinyl (VCG) - Original double backs seats with marine grade vinyl (VCG) - Custom floor mats throughout (2 x front, 2 x behind front seats, 1 x rear section) - CD player with AUX input on front - 4 x speaker sound that can easily be heard on the highway - 2 x 6x9 speakers in rear door for fold out campsite music - New black vinyl door cards - Spare (new) oil filter, air filter - Spare 4-2-1 extractors (not on car) - Replaced engine (2 years) - ARB Old Man Emu 2” lifted springs front and back - Replaced starter motor (3 months) - Checker plate sills (rust removed and rust proofed) - Ckecker plate section on bottom of b pillar ((rust removed and rust proofed) - Replaced battery - Replaced alternator - New trailer 7 pin round plug (1 week) - Replaced oils in: o Front and rear diff o Transfer case o Gear box - Gear box changes perfectly - Transfer case works - Front hubs lock in easily - Currently registers until 6/13. Don’t have RWC yet but might be able to organise one for buyer if negotiated - Is currently in Laidley (50 mins from Brisbane) but can be delivered to Brisbane/Sunshine Coast area if negotiated Needs doing: - Rear main seal (which I will do in the summer holidays if the car does not sell) $3200 PM Here or 0419703112 |
|
| Author: | S13RR4 [ Mon Oct 22, 2012 4:31 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
Pictures |
|
| Author: | bundyzook [ Mon Oct 22, 2012 6:07 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
Looks neat! Very interested mate. Although I reckon I'm going to struggle to free up time to get up there from hunter valley in time before it sells.... |
|
| Author: | camskea [ Mon Oct 22, 2012 6:42 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
Are the seats on standard rails? Just wondering for the roadworthy.. |
|
| Author: | camskea [ Mon Oct 22, 2012 7:11 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
Also does the roll cage come out easy enough? Or is it welded in...? |
|
| Author: | S13RR4 [ Mon Oct 22, 2012 7:52 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
More.. |
|
| Author: | S13RR4 [ Mon Oct 22, 2012 7:53 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
bundyzook wrote: Looks neat! Very interested mate. Although I reckon I'm going to struggle to free up time to get up there from hunter valley in time before it sells.... Lockyer Valley, is only 50 mins from Brisbane |
|
| Author: | S13RR4 [ Mon Oct 22, 2012 8:09 pm ] |
| Post subject: | Re: SWB WT 90' Soft Top Sierra |
camskea wrote: Are the seats on standard rails? Just wondering for the roadworthy.. Yeah standard sierra rails with a new hole drilled in each, new seats are the same width but positioned slightly longer I think, I have original seats for road worthy camskea wrote: Also does the roll cage come out easy enough? Or is it welded in...? roll cage is bolted in 4 points, each one utilities an existing hole from where the back seats bolt in, would need to remove drawers (which is possible and I have done before) to do this. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|