[buzbox]

There's an LJ80 at my local wreckers so I'm hoping that this bonnet can be recycled rather than crushed, even better if watermouse can get it to make fibreglass copies for the masses. nudge nudge

The other bad idea I had was to chop it up and frankenstein it onto an SJ bonnet, use it as a wall ornament or coffee table.

It is in fair to bad condition, but is probably the only salvagable panel on the wreck, It does have various rust holes and needs a fair bit of TLC

These are the photo's I have at the moment, I'll get better one's later if requested







$40 is what I paid for it..

[Joe]

LJ70

[shep]

Joe wrote:

LJ70

X a metric crapload

[tanshi]

LJ80 and verry very frucked

[buzbox]

hahaha excuse my fat fingers, well in my defense, the 7 and 8 button are right next to each other. Or it could just be my LJ series noobness.

But yes, LJ80 and slightly very fucked.

Whaddya's rekon, frankenstein it onto an SJ bonnet ??

[atari4x4]

Send it up to tony, pretty sure he's chasing a lj bonnet.

[buzbox]

That's who I got it for, but LJ50 is what he's after. A bit like the SJ's, I thought that LJ's panels are pretty much all the same.

So up it go's on here before I either chop it up or take it back which then will most probably be crushed

[sideways]

buzbox wrote:

That's who I got it for, but LJ50 is what he's after. A bit like the SJ's, I thought that LJ's panels are pretty much all the same.

Fwiw LJ80 and LJ50 bonnets are interchangeable, just the LJ50 ones look better.

Basically all LJ panels are different, but interchangeable.

[Joe]

Turn it into a coffee table or part of a bar or something

[3cyl]

That would probably whistle at 80km/h

[sideways]

3cyl wrote:

That would probably whistle at 80km/h