auszookers.com
https://auszookers.com/forum/

wollongong nsw nt parts and some 1l and wt bits too
https://auszookers.com/forum/viewtopic.php?f=7&t=37499		 Page 1 of 1
Author:  nick_bj40 [ Sun Dec 02, 2012 6:09 am ]
Post subject:  wollongong nsw nt parts and some 1l and wt bits too
as title states i have a nearly complete 86 (i think) nt hard top 1.3l i want to wreak and 89 wt softtop but not much left now (no diffs, engine or driveline its all in my lwb :D )

as stated i have a 1l engine gearbox and non switch transfer (all with original 150k on them) which ran a treat i only removed the 1l due to needing a 5 speed and i only had a 1.3l one..

anyway if your chasing anything hit me up the cars are in warilla about half hour south of wollongong
Author:  zooktastic [ Sun Dec 02, 2012 7:52 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
pm sent
Author:  SierraDan [ Sun Dec 02, 2012 9:10 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
rear diff centre?
Author:  nick_bj40 [ Sun Dec 02, 2012 11:31 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
pm replyed

i have 1 3.7 and i think 3.9 rears $50 each
Author:  mudboy [ Sun Dec 02, 2012 11:34 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
what colour body is it
Author:  nick_bj40 [ Sun Dec 02, 2012 12:02 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
red nt hard top and light blue wt soft top
Author:  oz17ub [ Sun Dec 02, 2012 5:01 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Hey mate do you have the transfer case,if so is it geared?
Author:  nick_bj40 [ Sun Dec 02, 2012 5:11 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
i have 2 nt cases 1 switch 1 non switched but niether are geared mate
Author:  Parry [ Sun Dec 02, 2012 5:17 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Soft top window frame & bonnet?
Author:  rwt65 [ Sun Dec 02, 2012 5:21 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Do you have a flange for a 1ltr transfer?
Author:  oz17ub [ Sun Dec 02, 2012 5:31 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Are the tcases able to be used in wt,i doubt there would be any difference there. How much for the switched one?
Author:  mudzook [ Mon Dec 03, 2012 8:20 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Passenger side standard flares for wt soft top? How much?
Author:  nick_bj40 [ Mon Dec 03, 2012 9:27 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Front one is a bit beaten up and the rear has dints too $10 for both
Author:  nick_bj40 [ Mon Dec 03, 2012 10:55 am ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
oh dear i missed a few here.. sorry guys..

parry; i do have them both parry i was planing on using them myself BUT if you were to make an offer i may be part with them

rwt65; yes i do mate there on the transfer atm but if u want them $10 each

oz71ub; $150 for the switched case BUT u will need to change the flanges to wt because nt bolt centres and bolt size is smaller
Author:  rwt65 [ Mon Dec 03, 2012 12:01 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
You have a PM
Author:  GOMEZ [ Mon Dec 03, 2012 12:17 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
Pm sent
Author:  nick_bj40 [ Mon Dec 03, 2012 1:07 pm ]
Post subject:  Re: wollongong nsw nt parts and some 1l and wt bits too
pm's replied
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/